Table of Contents
Advertisement
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Auto] and [Full Screen]. This item
allows you to select the desired additional POST waiting time to easily enter the BIOS setup.
You can only execute the POST delay time during Normal Boot. The values range from 0 to
10 seconds.
This feature will only work under normal boot.
2.8.3
Bootup NumLock State [Enabled]
This item allows you to enable or disable power‑on state of the NumLock. Configuration
options: [Disabled] [Enabled]
2.8.4
Above 4GB MMIO BIOS assignment [Disabled]
This item allows you to enable/disable above 4G memory mapped IO BIOS assignment. By
default this item is set to [Disabled] when Aperture Size is set to 2048 MB. Configuration
options: [Disabled] [Enabled]
2.8.5
Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.8.6
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
2.8.7
Interrupt 19 Capture [Disabled]
[Enabled]
[Disabled]
2.8.8
Setup Mode [EZ Mode]
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
2-44
The Option ROM Messages will be shown during the POST.
Only the ASUS logo will be shown during the POST.
Allows the option ROMs to trap Interrupt 19.
Disables this function.
This item allows you to go to EZ Mode of the BIOS after POST.
Chapter 2: Getting started
Hide quick links:
Advertisement
Table of Contents
