Table of Contents
Advertisement
USB Port Disable Override
Allows you to selectively enable/disable the corresponding USB port from reporting a Device
Connection to the controller.
USB_C1 [Enabled]
Allows you to enable/disable USB_C1 port. Configuration options: [Disabled] [Enabled]
USB_1112/1314 [Enabled]
Allows you to enable/disable USB_1112/1314 port. Configuration options: [Disabled]
[Enabled]
USB3_12/34/78 [Enabled]
Allows you to enable/disable USB3_12/34/78 port. Configuration options: [Disabled]
[Enabled]
2.6.7
Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
[Disabled]
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or
high‑definition audio depending on the audio standard that the front panel audio
module supports.
[HD]
[AC97]
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
M.2 and SATA Express SATA Mode Configuration [SATA Express]
M.2 shares SATA mode with SATA Express. This item allows you to change the SATA mode
before you install M.2 SATA device.
[SATA Express] SATA mode will be switched to SATA Express. M.2 can only support PCIE
[M.2]
Intel LAN Controller [Enabled]
[Enabled]
[Disabled]
2‑36
Enables the HD Audio Device.
Disables the HD Audio Device.
Sets the front panel audio connector (AAFP) mode to high definition
audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97
Sets to an SPDIF audio output.
Sets to an HDMI audio output.
devices.
SATA mode will be switched to M.2. SATA Expess can only support PCIE
device.
Enables the Intel LAN controller.
Disables the controller.
Chapter 2: Getting started
Hide quick links:
Advertisement
Table of Contents
