Epson BrightLink 475Wi Installation Handbook
Lamp and status information
Hide thumbs
Also See for BrightLink 475Wi:
- User manual (259 pages) ,
- Installation manual (140 pages) ,
- Operation manual (53 pages)
Advertisement
Quick Links
Epson BrightLink 475Wi / 480i / 485Wi
Projector Light Status
The lights on the projector's control panel indicate the projector status and let you know when a problem
occurs. Check the status and color of the lights and look for a solution in the table below.
1
Power light
2
Lamp light
3
Temperature light
Power light
Green
Flashing green
Orange
Flashing orange Off
Flashing red
Lamp light
Temperature
light
Off
Off
Off
Off
Off
Off
Off
Off
Flashing orange
INSTALLATION HANDBOOK
Status and solution
Normal operation.
Warming up. Wait for an image to appear.
Standby or sleep mode.
Preparing network monitoring or shutting down.
(Wait for the light to remain orange before
unplugging the projector.)
Projector is too hot.
• Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• Make sure the environmental temperature is not
too hot.
• If overheating continues, replace the air filter.
Lamp and Status Information
1
Advertisement
Related Manuals for Epson BrightLink 475Wi
Summary of Contents for Epson BrightLink 475Wi
-
Page 1: Projector Light Status
INSTALLATION HANDBOOK Epson BrightLink 475Wi / 480i / 485Wi Lamp and Status Information Projector Light Status The lights on the projector's control panel indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table below. - Page 2 INSTALLATION HANDBOOK Epson BrightLink 475Wi / 480i / 485Wi Lamp and Status Information Power light Lamp light Temperature Status and solution light Projector has overheated and turned off. Leave it turned off to cool down for five minutes. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects.