Download Print this page

Honeywell Dolphin 75e Power Up Instructions

Hide thumbs Also See for Dolphin 75e:

Download this manual See also: User Manual

75E-AND-ENUS-IG Rev B, 5/15

Power Up Instructions

Follow the steps below the first time you power up the terminal.

1. Install the battery.

2. Charge the battery for 6 hours.

3. Press the Power button. When the Honeywell logo appears and the right green LED turns on,

press and hold both the Volume Up and Home buttons at the same time. 

Power

(top)



If the terminal shuts down, repeat step 3.

4. Release the buttons when the green LED turns Off. After approximately 30 seconds, the

system update screen appears. When the system update is finished, the lock screen appears.

For more information on how to use the Dolphin 75e, see the enclosed Quick Start Guide.

Do not remove battery during update!

Volume Up

(side)

Page 1 1. Install the battery. 2. Charge the battery for 6 hours. 3. Press the Power button. When the Honeywell logo appears and the right green LED turns on, press and hold both the Volume Up and Home buttons at the same time. ...
Page 2: Limited Warranty
Android and other marks are trademarks of Google Inc. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this ...