Canon GP215 Service Manual page 343

Hide thumbs Also See for GP215:

Table of Contents

6) Disconnect the connector y, and remove the

vertical path assembly.

Figure 4-321

4. Horizontal Registration Motor

1) Remove the following:

• Pick-up unit (p. 4-18)

• Pick-up drive unit (p. 4-15)

• Vertical path unit (p. 4-16)

2) Remove the two screws w, and disconnect

the two connectors e; then, remove the hori-

zontal registration motor q.

Figure 4-322

CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

4. MECHANICAL SYSTEM

5. Developing Clutch

1) Remove the rear cover (4 screws), flywheel (3

screws), and harness retainer (high-voltage

2) Remove the two screws, and disconnect the

connector e; then, remove the developing

Figure 4-323

6. Multi Clutch

1) Remove the rear cover (4 screws) and the fly-

wheel (3 screws).

2) Remove the two screws w, and disconnect

the connector e; then, remove the multi

Figure 4-324

Show Quick Links

Chapters

Table of Contents