hit counter script
Download
Share
Print this page
Pioneer AVH-X8700BT Firmware Upgrade Document
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Car Receiver
  5. AVH-X8700BT
  6. Firmware upgrade document

Pioneer AVH-X8700BT Firmware Upgrade Document

System firmware update
Hide thumbs Also See for AVH-X8700BT:
1
2
3
4
5

Advertisement

Quick Links

Download this manual See also: Operating Manual, Installation Manual
System Firmware Update Instructions for AVH-X8700BT
REMARKS:
If you have any difficulty carrying out these instructions, please contact Pioneer Customer
Support. Once upgraded to this version, it is not possible to downgrade to a lower version.
Please download and print these instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order
described below.
The only USB port that supports the firmware update is USB port 1, but you may also use
the SD card slot.
Never turn your unit off, eject the SD memory card or disconnect the USB storage device
while the firmware is being updated.
You can only update the firmware when the vehicle is stopped and the parking brake is
engaged.
In order to perform this update, the following items are needed:
Pioneer AVH-X8700BT
A USB storage device or SD card, storage device requirements:
-
2 GB or larger in capacity, formatted to FAT32
-
Should be blank (should not contain any files)
A. Displaying the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number
of the firmware.
1. Press the HOME button to display the Top menu screen.
2. Touch the following keys in the following order.
The "System" screen appears
3. Scroll down the list.

Advertisement

loading

Related Manuals for Pioneer AVH-X8700BT

Summary of Contents for Pioneer AVH-X8700BT

  • Page 1 System Firmware Update Instructions for AVH-X8700BT REMARKS: If you have any difficulty carrying out these instructions, please contact Pioneer Customer Support. Once upgraded to this version, it is not possible to downgrade to a lower version. Please download and print these instructions before downloading and installing the firmware update.
  • Page 2 7. Verify that the firmware on your unit is not already 1.03. B. Downloading the Firmware Update Files from Pioneer’s website NOTE: If you have any difficulty performing these instructions, please contact Pioneer Customer Support. Once upgraded to this version, it is not possible to downgrade to a lower version.
  • Page 3 Procedure: 1. Connect a blank (formatted in FAT32) SD card or USB storage device to your computer, and then locate the correct update file and copy it onto the SD card or USB storage device 2. Insert an SD card into the SD card slot or connect the USB storage device to the USB port 1 of the receiver.
  • Page 4 9. Touch [Continue] to display the data transfer mode. Wait for the file check. 10. Touch [Start]. Note that the images are for illustration purposes only; the actual version number may differ. The Progress status is shown. (Please note: Approximately one minute after the update has started, the receiver will restart itself and return to the update screen below.) 11.
  • Page 5 Q: What if I cannot upgrade my set / the set does not show the start up screen after more than 1 attempt? A: Please contact your local Pioneer service organisation for a product check-up. Contact Information Pioneer Customer Support Center http://www.pioneer.eu...