Connect To Cable/Dsl/Satellite Modem - D-Link DIR-600L User Manual

Wireless n 150 cloud router

Hide thumbs Also See for DIR-600L:

Table of Contents

Section 2 - Installation

Connect to Cable/DSL/Satellite Modem

If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:

1. Place the router in an open and central location. Do not plug the power adapter into the router.

2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem's power adapter. Shut down your

computer.

3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the WAN

port on the router.

4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your

computer.

5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).

6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot.

7. Turn on your computer.

8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is plugged

into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections

are correct.

9. Skip to page 8 to configure your router.

D-Link DIR-600L User Manual

Table of Contents

Show Quick Links

Table of Contents