Connect To Cable/Dsl/Satellite Modem - D-Link DGL-4500 Manual
Gaming router
Hide thumbs
Also See for DGL-4500:
- User manual (108 pages) ,
- Specifications (2 pages) ,
- Quick install manual (1 page)
Table of Contents
Advertisement
Section - Installation
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem's power adapter.
Shut down your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place
it into the Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet
port on your computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for
the router to boot.
7. Turn on your computer.
8. Refer to page 15 to configure your router.
D-Link DGL-4500 User Manual
Connect to Cable/DSL/Satellite Modem
Advertisement
Table of Contents
