Package Contents This manual contains information on the Sony DWZ-M70/B70HL Digital Wireless Packages. The contents of each package are as follows. DWZ-M70 This set includes a handheld microphone (transmitter: ZTX-M02RC) and a half-rack receiver (receiver: ZRX-HR70). ZTX-M02RC handheld ZRX-HR70 half-rack...
• Warranty booklet (1) (for E and SYV models only) High reliability By allowing you to select from two RF modes based on ZRX-HR70 your intended use and incorporating Sony’s unique data processing technology, the system provides highly- • Half-rack receiver (ZRX-HR70) (1) • AC adapter (1) reliable wireless transmission in wireless LAN •...
In addition, the interchangeable microphone unit allows you to use the microphone in a DWZ-M70 variety of applications. * The microphone unit’s mounting area has a diameter of 31.3 mm Handheld microphone (transmitter: ZTX- and a pitch of 1.0 mm.
Page 6
e Antenna cover a POWER button Contains the antenna. Turns the unit on or off. b POWER indicator Caution Lights when the unit is turned on. Do not squeeze the antenna cover. Doing so will weaken the signal that is transmitted, decreasing the transmission c Display range.
f Cable clamp Rear Secures the cable of the supplied AC adapter. g DC IN 12V (power input) connector Connect the supplied AC adapter here. DWZ-B70HL Body-pack transmitter (transmitter: ZTX- B02RC) a ANTENNA a/b connector (BNC type) Connect the supplied antenna here. b UNBALANCED OUTPUT AUX/TUNER (external audio output) connector (headphone jack)
Page 8
d Audio input connector Function Button operation Connect the supplied microphone or use a guitar cable Enable muting function Press the button (GC-0.7BMP; not supplied) to connect a guitar or similar Disable muting function instrument here. j Channel display e AUDIO/MUTING indicator Displays the transmission channel.
You can recharge batteries by inserting rechargeable nickel-metal hydride batteries into the transmitter and using the dedicated BC-DWZ1 battery charger (not supplied). We recommend using Sony nickel-metal hydride batteries (2000 mAh or more). Note Before charging the batteries, check the remaining charge of the transmitter's batteries in the receiver's display.
Attaching the Supplied Accessories Attaching the Supplied to the Half-Rack Receiver (ZRX- Accessories HR70) Attaching the antenna This section describes how to attach the supplied accessories to each unit. Insert the supplied antenna into the Attaching the Supplied Accessories ANTENNA a/b connector at the rear of the receiver and turn it.
To attach to a belt Attaching the headband and the cord clip Slide the belt into the belt clip on the unit completely, and make sure it is secure. To wear the microphone more securely, attach the supplied headband (1) before wearing the Caution microphone.
To select the channel Receiver Settings In the [Setup] screen, select [Channel Setup]. The [Channel Setup] screen appears. Use the rotary encoder and the ESC button to configure settings on the ZRX-HR70 half-rack receiver. Perform Specify the channel using one of the following setting operations as follows.
Page 13
Configuring the effect level Configuring the equalizer Configure the equalizer. Under factory default settings, In the [Setup] screen, select [Audio Setup]. the equalizer is set to 0 dB for each frequency and the function itself is set to [OFF]. The [Audio Setup] screen appears. In the [Setup] screen, select [Audio Setup].
Select the connectors for which you want the muting Transmitter Settings function enabled. Screen display To All To AUX/ Balanced Outputs Tuner & Main Configuring the Transmitting Only Connector Only Channel Settings BALANCED OUTPUT – Enabled UNBALANCED Two RF modes (channel modes), [Wide Band] and –...
Selecting the channel Enabling Encrypted Press and hold the channel selection button while the Transmission unit is turned on. The channel display blinks. Encrypted transmission will only be enabled on Press the channel selection button to select the transmitter and receiver pairs for which the following channel.
Page 16
Disabling encrypted transmission Set the ENCRYPTION switch on the transmitter to the OFF position. In the [Setup] screen of the receiver, select [Advanced Settings]. The [Advanced Settings] screen appears. For details on displaying the [Setup] screen, see “Displaying the settings menu” (page 12). Select [Encryption].
Channel Frequency List The frequencies used by the Wide Band (WIDE, channels 1 to 6) and the Narrow Band (NARROW, channels a to f) are as follows. Each channel uses multiple compatible frequencies to increase reliability and redundancy. The appropriate frequencies are used according to the surrounding wireless environment.
Page 18
Wi-Fi channels The frequencies covered by each Wi-Fi channel are as follows. The ranges that cover the most commonly used channels, channels 1, 6, and 11, are shown in grey. Wi-Fi channels Frequencies (MHz) 2402 2407 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2477 2482 Ch 1 Ch 2 Ch 3...
System Configuration Examples The following system configuration examples are of the DWZ series. Mixer, recorder, etc. UNBALANCED OUTPUT Antenna Antenna MAIN (main audio output) connector Half-rack receiver ANTENNA (ZRX-HR70) a connector AC adapter ANTENNA b connector DC IN 12V (power input) connector BALANCED OUTPUT connector Mixer...
Troubleshooting Check the following if problems occur. Should any problem persist, consult your Sony dealer. Symptom Meanings Remedy The unit does not turn on. The polarity orientation of the batteries in the Insert the batteries with the correct polarity battery compartment is incorrect.
Page 21
Symptom Meanings Remedy The RF indicator on the Interference is being received. Set the receiver to a channel for which the RF receiver lights even when indicator does not light, and then set the transmitter the transmitter is off. to the same channel. The BATT/CHARGE The batteries are not inserted.
• The frequencies assigned to each channel of a 2.4 GHz band wireless microphone system other than the Sony DWZ series may differ and may not be compatible. Therefore, simultaneous use with such systems may not be possible.
WHATSOEVER. The antenna covers (ZTX-M02RC) and the body of the • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY unit (ZTX-B02RC) are the areas that are charged and may KIND MADE BY USERS OF THIS UNIT OR MADE BY become hot during or immediately after charging.
Sony LR6 (size AA) alkaline dry cell DWZ-B70HL batteries) Dimensions Carrier frequencies 2402.0 MHz to 2478.5 MHz Occupied RF bandwidth 2.5 MHz Type of emission F1D and F1E Modulation method GFSK Operating temperature 0 °C to 50 °C (32 °F to 122 °F) (during charging: 0 °C to 40 °C (32 °F to...
Page 25
Mass Approx. 162 g (5.7 oz.) (including Dimensions batteries) ZRX-HR70 half-rack receiver For details on the half-rack receiver, see “ZRX-HR70 half-rack receiver” (page 24) for the DWZ-M70. 15 × 170 ECM-LZ1UBMP lavalier microphone Type Electret condenser microphone Frequency range 60 Hz to 18,000 Hz...