hit counter script
Sharp XG-V10XE Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. XG-V10XE
  6. Service manual

Sharp XG-V10XE Service Manual

Lcd projector
Hide thumbs Also See for XG-V10XE:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät in seinen
Originalzustand gebracht werden. Außerdem dürfen für die spezifizierten Bauteile nur identische Teile verwendet
werden.
SERVICE MANUAL
SERVICE-ANLEITUNG
MODEL
MODELL

SHARP CORPORATION

1

LCD PROJECTOR

LCD PROJEKTOR
XG-V10XE
XG-V10XE
S11N8XG-V10XE

Advertisement

Table of Contents
loading

Related Manuals for Sharp XG-V10XE

Summary of Contents for Sharp XG-V10XE

  • Page 1: Lcd Projector

    XG-V10XE SERVICE MANUAL SERVICE-ANLEITUNG S11N8XG-V10XE LCD PROJECTOR LCD PROJEKTOR MODEL XG-V10XE MODELL In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.

  • Page 2: Table Of Contents

    XG-V10XE CONTENTS Page Page • SPECIFICATIONS ..........3 • OVERALL WIRING DIAGRAM ...... 122 • NOTE TO SERVICE PERSONNEL ....4 • DESCRIPTION OF SCHEMATIC DIAGRAM . 124 • OPERATION MANUAL ........6 • WAVEFORMS ..........125 • REMOVING OF MAJOR PARTS ..... 14 •...

  • Page 3: Specifications

    Supplied accessories Remote control, Two AA size batteries, Power cord (1.8 m), RGB cable (3 m), PS/2 mouse control cable (1 m), USB mouse control cable (1 m), Remote mouse receiver, Extra air filter, Terminal cover, CD-ROM, LCD projector operation manual, LCD projector quick references, Sharp Advanced Presentation Software operation manual...

  • Page 4: Note To Service Personnel

    3. Do not operate for more than 2 hours with the enclosure removed. posure (Fig. 1). Note: Please obtain a lens cap before servicing a model XG-V10XE that is received without one. UV-Radiation and Medium Pressure Lamp Precautions LENS CAP 1.

  • Page 5: Cautions Concerning The Laser Pointer

    XG-V10XE Cautions Concerning the Laser Pointer "COMPLIES WITH 21 CFR SUBCHAPTER J" SHARP ELECTRONICS CORPORATION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 TEL : 1-800-BE-SHARP U.S.A. ONLY LASER RADIATION- DO NOT STARE INTO BEAM REMOTE CONTROL MODEL NO. : RRMCG1564CESA WAVE LENGTH : 650nm DC3V(1.5VX2PCS.)

  • Page 6: Location Of Controls

    XG-V10XE Location of Controls Projector Front and Top View MUTE button POWER buttons (ON/OFF) VOLUME buttons ( + / – ) MENU button LENS button ADJUSTMENT buttons (] / [ / < / >) ENTER button INPUT 1,2,3 button INPUT 4,5,6 button...
  • Page 7 XG-V10XE Projector Speakers Side and Rear View Exhaust vent Remote control sensor LED display (ID No.) RS-232C INPUT port/ AC socket RS-232C OUTPUT port OUTPUT port (15-pin Mini D-sub)for INPUT 1,2/ AUDIO OUTPUT terminals for INPUT 1,2 INPUT 2 terminals/AUDIO INPUT 2 terminals...

  • Page 8: Operating The Wireless Mouse Remote Control

    XG-V10XE Operating the Wireless Mouse Remote Control Remote Control Front View Top View Remote control MUTE button signal transmitter Laser pointer POWER buttons VOLUME buttons window (ON/OFF) ( + / – ) LASER POINTER/ LENS/BLACK MENU button SCREEN button Rear View...

  • Page 9: Using The Remote Control As A Wireless Mouse

    XG-V10XE Using the Remote Control as a Wireless Mouse The remote control has the following three functions: MOUSE/ADJUSTMENT switch • Projector control (Remote control) • Wireless mouse MOUSE ADJ. MOUSE ADJ. • Laser pointer Wireless mouse/ Projector control Laser pointer Remote Control/Mouse Receiver Positioning •...
  • Page 10 XG-V10XE Use as a Wireless Mouse Be sure the supplied remote mouse receiver is connected to your computer. Slide the MOUSE/ADJUSTMENT switch to MOUSE. MOUSE mode buttons LASER BLACK SCREEN POINTER LEFT-CLICK MOUSE RIGHT-CLICK 1.2.3 4.5.6 MOUSE/ MOUSE ADJ. ADJUSTMENT...
  • Page 11 XG-V10XE Use as a Laser Pointer Slide the MOUSE/ADJUSTMENT switch to MOUSE, and press LASER POINTER ( ) to activate the laser pointer. LASER POINTER 1.2.3 4.5.6 MOUSE/ADJUSTMENT MOUSE ADJ. switch Conference Series • When the button is released, the light automatically goes off.

  • Page 12: Connection Pin Assignments

    XG-V10XE Connection Pin Assignments INPUT 1 RGB and OUTPUT (INPUT 1,2)Signal Input Ports:15-pin Mini D-sub female connector RGB Input Analog 1. Video input (red) 8. Earth (blue) 2. Video input 9. Not connected (green/sync on green) 10. GND 3. Video input (blue) 11.
  • Page 13 XG-V10XE Dimensions Rear View Side View Top View Side View 444.2 Front View Bottom View Unit: mm...

  • Page 14: Removing Of Major Parts

    XG-V10XE REMOVING OF MAJOR PARTS 1. Removing the intake cover, intake filter and lamp unit. 1-1. Detach the intake cover. 1-2. Detach the intake filter. 1-3. Loosen the lock screw from the lamp cover and slide the lamp cover off position.
  • Page 15 XG-V10XE 2. Removing the front, top and rear panels. 2-1. Remove the ten lock screws from the rear panel. Disconnect the connector (RD) of the remote control receiver PWB unit 2. Then detach the rear panel. 2-2. Remove the two lock screws from the remote control receiver PWB unit 2. Detach the remote control receiver PWB unit 2.
  • Page 16 XG-V10XE 3. Removing the reinforcing angles and intake fan duct assembly. 3-1. Remove the four lock screws from the front reinforcing angle and detach this angle. 3-2. Remove the four lock screws from the rear reinforcing angle and detach this angle.
  • Page 17 XG-V10XE 4. Removing the PWBs 4-1. Remove the two lock screws from the DVI connector. 4-2. Remove the five lock screws from the PC I/F PWB. Lift this PWB off the output PWB unit. 4-3. Remove the four lock screws from the cooling fan. Remove the lock screw from the output sub-PWB unit and disconnect the connectors.

  • Page 18: Removing The Optical Mechanism Unit

    XG-V10XE 5. Removing the power/ballast PWB unit assembly. 5-1. Remove the lock screw from the socket holder (with shorter lead) for the lamp unit 1. Slide sideway and detach the holder. 5-2. Remove the lock screw from the socket holder (with longer lead) for the lamp unit 2. Slide sideway and detach the holder.

  • Page 19: Resetting The Total Lamp Timer

    · Clogged air filter. · Clean the filter. · Cooling fan breakdown. · Take the projector to your nearest Au- · Internal circuit failure. thorized Sharp Industrial LCD Products Dealer or Service Center for repair. LAMP REPLACE- The lamp does · Burnt-out lamp.

  • Page 20: The Optical Unit Outline

    XG-V10XE THE OPTICAL UNIT OUTLINE Layout of the optical system Note: Layout for positioning the optical system. Cross dichroic prism 2 Output polarizer B 2 Output polarizer R B-LCD 2 Output polarizer G Input polarizer B Projection Lens Relay lens 3...

  • Page 21: Convergence And Focus Adjustment

    XG-V10XE CONVERGENCE AND FOCUS ADJUSTMENT » Place the set in the ceiling-mounted position, open the maintenance door, and start the convergence and focus adjustments. Make sure the settings are complete and then turn on the power. For adjusting the image, use the remote controller. Take the following adjustment procedures.

  • Page 22: Convergence And Focus Adjustments Mechanism

    XG-V10XE Notes : 1 The eccentric cam is used for convergence adjustment. This means that the cam’s turning and the linear movement are not always uniform. 2 This model is not equipped with the LCD image adjustment mechanism. This is because the dichroic prism is used for image formation.
  • Page 23 XG-V10XE Convergence and Focus Adjustments at a Glance Adjustment directions Adjustment Direction Definition Direction of LCD panel X direction LCD right and left Convergence Y direction LCD top and bottom θZ direction Rotation around Z axis LCD turning axis Z direction LCD optical axis θX direction...
  • Page 24 XG-V10XE Replacing the LCDs Remove the top cover. (1) Remove the six screws off the relay duct and disconnect the relay duct. (2) Remove the two screws off the upper suction cover and detach this cover. (3) Disconnect the LCD flat cable from the PWB connector.
  • Page 25 XG-V10XE 1. Adjusting the mirror optical axis The optical axis must be readjusted to correct possible eclipse that occurs with the R, G or B LCD panel. This readjustment is usually required when an optical part in the optical mechanism has been replaced, and may be needed when a LCD panel has been replaced.
  • Page 26 XG-V10XE M5 adjusting lever M6 adjusting lever Mirror adjusting Mirror adjusting lever lock screws lever lock screws Mirror adjusting lever lock screws PBS lock screw PBS adjusting groove M3 adjusting lever Lamp adjusting groove Lamp adjusting groove Lamp lock screws...

  • Page 27: Electrical Adjustment

    XG-V10XE ELECTRICAL ADJUSTMENT Hook up a signal generator, or a DOSV or Mac personal computer to the projector in order to feed the signals specified in the Adjusting conditions. Adjusting point Adjusting conditions Adjusting procedure » Make the following settings.
  • Page 28 XG-V10XE Adjusting point Adjusting conditions Adjusting procedure » Select R2-GAIN. Adjust the setting so that the RGB2 system 1. Select the following group black level and subjects. signal component has the minimum amplitude. signal amplitude Group : OUTPUT2 adjustment Subject : R2-GAIN...
  • Page 29 XG-V10XE Adjusting point Adjusting conditions Adjusting procedure » Adjust the R1-BLK and B1-BLK settings to get the RGB white 1. Feed the 32-step grayscale balance adjust- signal. (XGA, 60 Hz) tone balance to optimum. ment 2. Select the following group and subjects.
  • Page 30 XG-V10XE Adjusting point Adjusting conditions Adjusting procedure » Using the set’s control switch or the remote Video AGC 1. Feed the split color bar sig- adjustment nal. controller’s button, adjust the setting so that the 2. Select the following group 100% white signal has some bit-less.
  • Page 31 XG-V10XE Adjusting point Adjusting conditions Adjusting procedure » Select R1-GAIN. Adjust the setting so that the R Video input 1. Feed the NTSC 10-step panel signal signal. signal amplitude and the G signal amplitude be amplitude 2. Select the following group the same.
  • Page 32 XG-V10XE Adjusting point Adjusting conditions Adjusting procedure » Using the set’s control switch or the remote DVD color 1. Feed the 100% color bar saturation signal of the 480I compo- controller’s button, adjust the setting so that the adjustment nent signal to the Y, Pb and...
  • Page 33 XG-V10XE Adjusting point Adjusting conditions Adjusting procedure » Make sure the white balance is the same as on White balance 1. For the adjusting condi- checking and tions, refer back to Item the monitor screen. To obtain the specified white readjustment Nos.
  • Page 34 XG-V10XE Adjusting point Adjusting conditions Adjusting procedure » Using the set's control switch or the remote control- Lens perform- ance checking ler, make sure the focus, zoom, keystone and lens shift actions are as specified. » Make the following settings.

  • Page 35: Adjusting The Pc Interface

    XG-V10XE ADJUSTING THE PC INTERFACE (CPCi-0042CE12. PC I/F Unit) 1. Initializing the EEPROM 1) Press S2601 to call the process mode. 2) Execute the S1 command on the SSS menu. (The S1 command is used to get the PC boards initialized. Do not carry out the S2 command because otherwise all the other adjustment data than on the PC boards would be initialized.)
  • Page 36 XG-V10XE Process menu1 OUTPUT1 OUTPUT2 R-BRIGHT OUTPUT1 OUTPUT2 G-BRIGHT R1-BLK OUTPUT3 PSIG-H B-BRIGHT R1-GAIN VIDEO1 PSIG-L G1-BLK VIDEO2 R2-BLK G1-GAIN R2-GAIN B1-BLK NOKO G2-BLK B1-GAIN LINE G2-GAIN B2-BLK PATTERN B2-GAIN CVIC LENS SPECIAL OUTPUT3 G-BRIGHT VIDEO1 CB-OFFSET VIDEO2 NTSC-H CR-OFFSET...
  • Page 37 XG-V10XE Process menu2 LINE PATTERN TIME OUTPUT1 RGB [50] OUTPUT2 CROSS RAMP OUTPUT3 STEP VIDEO1 TEMP OFF COLOR VIDEO2 SENSER CHECK LAMP ID CHECK NOKO LINE PATTERN CVIC LENS SPECIAL CVIC PROGRESSIVE ENHANCE PROGRESSIVE SCREEN MODE LEVEL SPECIAL LENS LIMIT...
  • Page 38 XG-V10XE Precautions in servicing If the convergence gets out of spec during servicing, call up the process mode and select the following sub- jects. Group : NOKO Subject : R-CNV-H, R-CNV-V G-CNV-H, G-CNV-V B-CNV-H, B-CNV-V (H: Horizontal adjustment, V: Vertical adjustment) Adjust the above settings in the range of 0-4.

  • Page 39: Trouble Shooting Table

    XG-V10XE TROUBLE SHOOTING TABLE Checking the PWB performance Video input in trouble RGB input in trouble Through-output in trouble Remote control in trouble Go to "Checking the video unit Feed test pattern signal from Through-output circuit in Go to "Checking the remote circuit".

  • Page 40: Checking The Video Unit Circuit

    XG-V10XE TROUBLE SHOOTING TABLE (Continued) Checking the video unit circuit Is there video signal output at pin (7) of IC1405? Check the IC1403, IC1406 selector switch, terminal voltage and input circuit. Is there video signal input at IC4001? Check the low-pass and buffer circuits of Q4002, Q4003 and Q4004.
  • Page 41 XG-V10XE TROUBLE SHOOTING TABLE (Continued) Checking the chroma and Y signals of IC801 (RGB signal output) Are there signal inputs at pins (12), (31) and (37) of SC401? Go to "Checking the video unit circuit". Are there output waveforms at pins...

  • Page 42: No Or Unusual Horizontal Sync

    XG-V10XE TROUBLE SHOOTING TABLE (Continued) No or unusual Y signal Is there Y signal input at pin (21) of IC803? Go back to the signal processing block. Is there Y signal output at pin (40) of IC803? Check IC803 and its peripheral circuits.
  • Page 43 XG-V10XE TROUBLE SHOOTING TABLE (Continued) Checking the output PWB unit Is there signal input at SC6801? Are voltages applied to EA connectors and SC8404, If there is no signal at EA SC8405 and SC8502? If there is no signal at SC8404...

  • Page 44: No Audio Output

    XG-V10XE TROUBLE SHOOTING TABLE (Continued) No audio output Are there audio signal inputs at pins (2) and (23) of IC301? Check the input, the switching circuit of IC403 and IC404, and their peripheral circuit. Are there audio signal outputs at pins...
  • Page 45 XG-V10XE TROUBLE SHOOTING TABLE (Continued) Power on Is the right input selected? Select the right input with remote control. Are the PC, video and LCP cables as specified and properly connected? Use the right cables or reconnect the cables. With the contrast control at maximum, does the image appear? Readjust the video system.

  • Page 46: Lamp Fails To Light-Up

    XG-V10XE TROUBLE SHOOTING TABLE (Continued) Lamp fails to light-up Turn on the power switch. Is discharging sound heard from the lamp? Is the lamp out of socket? Is the ballast cooling fan running? Replace the Reconnect the lamp. lamp into socket.
  • Page 47 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-1 Checking the PC PWB Does the user menu appear onscreen? Is screen color as specified? Check the GA4 and its peripherals. Adjust the output system in the process adjustment. Overwrite the flash ROM.
  • Page 48 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-2 » Checking the sync (H/V) signal separation type Checking the RGB input Feed the sync separation type RGB signal to INPUT1 or INPUT2. Using panel key or remote controller, select INPUT1 or INPUT2.
  • Page 49 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-3 Checking the video input Check up the input signal settings. Is there video signal at C8077 land? Input PWB defective. Check the sync signal. CVIC_IC or ADC·EPLL circuit defective. Checking the input signal settings...
  • Page 50 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-4 » Check the H/V separation type sync signal. Checking the sync signal Is there vertical sync signal at TL8134? Is there horizontal sync signal at TL8133? Check up the input signal settings.
  • Page 51 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-5 » Check the R, G and B (Y, Pb and Pr) colors. Checking the R, G and B colors Is the signal type set for RGB? Set the type for RGB. Call the process mode.
  • Page 52 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-6 Checking the GA4 peripherals Select R, G and B individually on the pattern menu. Are the R, G and B video outputs as specified? GA4 peripherals checking complete. Measure the FB8004, FB8005,...
  • Page 53 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-7 Checking the COMPONENT input » Check the COMPONENT (1080I, 720P, 480P, etc.: 480I not included) signals. Feed the COMPONENT signal to INPUT1 or INPUT 2. Using panel key or remote controller, select INPUT1 or INPUT2.
  • Page 54 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-8 Checking the SOG circuit Measure the TL8136 output on oscilloscope screen. Is the composite sync signal reproduced in good timing? No problem with the SOG circuit. Measure the C8069 land on oscilloscope screen.
  • Page 55 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-9 Checking the VIDEO input Feed the composite video signal to INPUT4 or INPUT 5. Using panel key or remote controller, select INPUT4 or INPUT5. Select the VIDEO signal type on user menu.
  • Page 56 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-10 Checking the VIDEO sync signal » Checking the VIDEO vertical sync signal. Measure the TL8135 output on oscilloscope screen. Is the vertical sync signal as specified? » Checking the VIDEO vertical sync signal Measure the TL8132 output on oscilloscope screen.
  • Page 57 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-11 Checking the DVI digital input Note: Feed the DVI digital signal to In order to establish the plug & play fashion, first connect the cable INPUT3. to INPUT3 and then turn on the computer power (signal generator).
  • Page 58 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-12 Checking the DVI analog input With the plug & play fashion established, feed the DVI analog signal to INPUT3. Select the INPUT3 input. Does image appear onscreen? Are there R, G and B signals?
  • Page 59 XG-V10XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-13 » The SOG component of the DVI analog signal is separated Checking the DVI_SOG in the CXA3516R circuit. The Green signal is fed to the SOGIN2 terminal. The DVI SOG sync signal is selected by the bus switch (IC8023).
  • Page 60 XG-V10XE XG-V10XE CHASSIS LAYOUT / CHASSIS-ANORDNUNG...

  • Page 61: Block Diagram

    XG-V10XE XG-V10XE BLOCK DIAGRAM / BLOCKSCHALTBILD...
  • Page 62 XG-V10XE XG-V10XE OVERALL WIRING DIAGRAM / GESAMTSCHALTPLAN...

  • Page 63: Description Of Schematic Diagram

    XG-V10XE DESCRIPTION OF BESCHREIBUNG DES SCHEMATIC DIAGRAM SCHEMATISCHEN SCHALTPLANS VOLTAGE MEASUREMENT CONDITION: SPANNUNGSMESSUNGEN: 1. Voltages at test points are measured at the 1. Spannungen an den Prüfpunkten werden bei einer Netzspannung von 220V gemessen, Signale werden supply voltage of AC 220V. Signals are fed by a für die Wartung mit einem Farbbalken-Signal generator...

  • Page 64: Waveforms

    XG-V10XE WAVEFORMS / WELLENFORMEN SC1101 13-pin SC1101 11-pin SC1201 13-pin SC1201 11-pin (RSIG11) (RSIG9) (GSIG11) (GSIG9) H : 10µsec/div H : 10µsec/div H : 10µsec/div H : 10µsec/div V : 2V/div V : 2V/div V : 2V/div V : 2V/div...
  • Page 65 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-1/9...
  • Page 66 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-2/9...
  • Page 67 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-3/9...
  • Page 68 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-4/9...
  • Page 69 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-5/9...
  • Page 70 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-6/9...
  • Page 71 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-7/9...
  • Page 72 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-8/9...
  • Page 73 XG-V10XE XG-V10XE Ë OUTPUT UNIT / AUSGABEEINHEIT-9/9...
  • Page 74 XG-V10XE XG-V10XE Ë OUTPUT SUB UNIT / ZUSATZ-AUSGABEEINHEIT...
  • Page 75 XG-V10XE XG-V10XE Ë SIGNAL UNIT / SIGNALEINHEIT-1/5...
  • Page 76 XG-V10XE XG-V10XE Ë SIGNAL UNIT / SIGNALEINHEIT-2/5...
  • Page 77 XG-V10XE XG-V10XE Ë SIGNAL UNIT / SIGNALEINHEIT-3/5...
  • Page 78 XG-V10XE XG-V10XE Ë SIGNAL UNIT / SIGNALEINHEIT-4/5...
  • Page 79 XG-V10XE XG-V10XE Ë SIGNAL UNIT / SIGNALEINHEIT-5/5...
  • Page 80 XG-V10XE Ë LED UNIT / LED-EINHEIT...
  • Page 81 XG-V10XE Ë R/C RECEIVER-1 UNIT / FERNBEDIENUNGSEMPFÄNGERSEINHEIT 1...
  • Page 82 XG-V10XE XG-V10XE Ë R/C RECEIVER-2 UNIT / FERNBEDIENUNGSEMPFÄNGERSEINHEIT 2...
  • Page 83 XG-V10XE XG-V10XE Ë INPUT UNIT / EINGANGSEINHEIT-1/3...
  • Page 84 XG-V10XE XG-V10XE Ë INPUT UNIT / EINGANGSEINHEIT-2/3...
  • Page 85 XG-V10XE XG-V10XE Ë INPUT UNIT / EINGANGSEINHEIT-3/3...
  • Page 86 XG-V10XE XG-V10XE Ë POWER AND INLET UNIT / NETZTEILEINHEIT UND EINLASSEINHEIT (POWER) (INLET)
  • Page 87 XG-V10XE XG-V10XE Ë PC I/F UNIT / PC-I/F-EINHEIT-1/8...
  • Page 88 XG-V10XE XG-V10XE Ë PC I/F UNIT / PC-I/F-EINHEIT-2/8...
  • Page 89 XG-V10XE XG-V10XE Ë PC I/F UNIT / PC-I/F-EINHEIT-3/8...
  • Page 90 XG-V10XE XG-V10XE Ë PC I/F UNIT / PC-I/F-EINHEIT-4/8...
  • Page 91 XG-V10XE XG-V10XE Ë PC I/F UNIT / PC-I/F-EINHEIT-5/8...
  • Page 92 XG-V10XE XG-V10XE Ë PC I/F UNIT / PC-I/F-EINHEIT-6/8...
  • Page 93 XG-V10XE XG-V10XE Ë PC I/F UNIT / PC-I/F-EINHEIT-7/8...
  • Page 94 XG-V10XE XG-V10XE Ë PC I/F UNIT / PC-I/F-EINHEIT-8/8...

  • Page 95: Printed Wiring Board Assemblies

    XG-V10XE PRINTED WIRING BOARD ASSEMBLIES LEITERPLATTENEINHEITEN Output Unit (Wiring Side) Ausgabeeinheit (Leiterbahnseite)
  • Page 96 XG-V10XE Output Unit (Component Side) Ausgabeeinheit (Bestückungsseite)
  • Page 97 XG-V10XE Output Sub Unit (Wiring Side) Zusatz-Ausgabeeinheit (Leiterbahnseite) R/C Receiver-1 Unit (Wiring Side) Fernbedienungsempfängerseinheit 1 R/C Receiver-2 Unit (Wiring Side) (Leiterbahnseite) Fernbedienungsempfängerseinheit 2(Leiterbahnseite) LED Unit (Wiring Side) LED einheit (Leiterbahnseite)
  • Page 98 XG-V10XE Output Sub Unit (Component Side) Zusatz-Ausgabeeinheit (Bestückungsseite) R/C Receiver-1 Unit (Component Side) R/C Receiver-2 Unit (Component Side) Fernbedienungsempfängerseinheit Fernbedienungsempfängerseinheit 2 1(Bestückungsseite) (Bestückungsseite) LED Unit (Component Side) LED einheit (Bestückungsseite)
  • Page 99 XG-V10XE Signal Unit (Wiring Side) Signaleinheit (Leiterbahnseite)
  • Page 100 XG-V10XE Signal Unit (Component Side) Signaleinheit (Bestückungsseite)
  • Page 101 XG-V10XE Input Unit (Wiring Side) Eingangseinheit (Leiterbahnseite)
  • Page 102 XG-V10XE Input Unit (Component Side) Eingangseinheit (Bestückungsseite)
  • Page 103 XG-V10XE Power Unit (Wiring Side) Netzteinheit (Leiterbahnseite)
  • Page 104 XG-V10XE Power Unit (Component Side) Netzteinheit (Bestückungsseite)
  • Page 105 XG-V10XE PC I/F Unit (Wiring Side) PC-I/F-einheit (Leiterbahnseite)
  • Page 106 XG-V10XE PC I/F Unit (Component Side) PC-I/F-einheit (Bestückungsseite)
  • Page 107 XG-V10XE Inlet Unit (Wiring Side) Einlasseinheit (Leiterbahnseite) Inlet Unit (Component Side) Einlasseinheit (Bestückungsseite)

  • Page 108: Ersatzteilliste

    XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code PARTS LIST ERSATZTEILLISTE AUSTAUSCH VON TEILEN PARTS REPLACEMENT Ersatzteile, die besondere Sicherheitseigenschften haben, sind in Replacement parts which have these special safety characteristics dieser Anleitung markiert. Elektrische Komponenten mit solchen identified in this manual: electrical components having such fea- Eigenshaften sind in den Ersatzteil durch "å"...
  • Page 109 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code Q1603 VS2SD1664R/-1 J 2SD1664R DUNTKA154DE12 Q2101 VS2SA1462//-1 J 2SA1462 OUTPUT UNIT(Continued) Q2102 VS2SC2735//-1 J 2SC2735 Q2103 VS2SA1462//-1 J 2SA1462 IC5101 VHiBA05SFP+-1 J BA05SFP-E2 Q2104 VS2SC2735//-1 J 2SC2735...
  • Page 110 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code D7304 VHDDAN202K/-1 J Diode DUNTKA154DE12 D7501 VHDDAN202K/-1 J Diode OUTPUT UNIT(Continued) D7503 VHDDAN202K/-1 J Diode D7511 VHDDAN202K/-1 J Diode Q6803 VSHN1B04FU/-1 J HN1B04FU TH1601 VHHT1103K44-1 J Thermister...
  • Page 111 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C1654 VCKYCY1EF104Z J 0.1 Ceramic DUNTKA154DE12 C1655 VCEAPF1EW106M J 10 Electrolytic OUTPUT UNIT(Continued) C1656 VCKYCY1EF104Z J 0.1 Ceramic C1657 VCCCCY1HH5R0C J 5.0p Ceramic C1224 VCKYCY1EF104Z J 0.1...
  • Page 112 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C2610 VCCCCY1HH220J J 22p Ceramic DUNTKA154DE12 C2616 VCKYCY1HB103K J 0.01 Ceramic OUTPUT UNIT(Continued) C2618 VCKYCY1EF104Z J 0.1 Ceramic C2620 VCKYCY1HB103K J 0.01 Ceramic C2316 VCKYCY1EF104Z J 0.1...
  • Page 113 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA154DE12 RESISTORS OUTPUT UNIT(Continued) R1010 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R1011 VRS-CA1JF101J J 100 1/16W Metal Oxide C6812 VCKYCY1EF104Z J 0.1 25V Ceramic R1013 VRS-CY1JF331J J 330...
  • Page 114 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1316 VRS-CY1JF3R3J J 3.3 1/16W Metal Oxide DUNTKA154DE12 R1320 VRS-CY1JF271J J 270 1/16W Metal Oxide OUTPUT UNIT(Continued) R1321 VRS-CY1JF153J J 15k 1/16W Metal Oxide R1322 VRS-CY1JF101J J 100...
  • Page 115 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R2180 VRS-CY1JF101J J 100 1/16W Metal Oxide DUNTKA154DE12 R2184 VRS-CY1JF101J J 100 1/16W Metal Oxide OUTPUT UNIT(Continued) R2185 VRS-CY1JF000J 1/16W Metal Oxide R2186 VRS-CY1JF000J 1/16W Metal Oxide R1627 VRS-CY1JF332J J 3.3k 1/16W Metal Oxide...
  • Page 116 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R2440 VRS-CY1JF561J J 560 1/16W Metal Oxide DUNTKA154DE12 R2441 VRS-CA1JF101J J 100 1/16W Metal Oxide OUTPUT UNIT(Continued) R2442 VRS-CY1JF821J J 820 1/16W Metal Oxide R2443 VRS-CA1JF121J J 120...
  • Page 117 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R2783 VRS-CY1JF000J 1/16W Metal Oxide DUNTKA154DE12 R2786 VRS-CY1JF101J J 100 1/16W Metal Oxide OUTPUT UNIT(Continued) R2788 VRS-CY1JF101J J 100 1/16W Metal Oxide R2789 VRS-CY1JF101J J 100 1/16W Metal Oxide...
  • Page 118 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R5410 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide DUNTKA154DE12 R5413 VRS-CY1JF000J 1/16W Metal Oxide OUTPUT UNIT(Continued) R5415 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R5416 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R4217 VRS-CY1JF332J J 3.3k 1/16W Metal Oxide...
  • Page 119 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R7360 VRS-CY1JF472J J 4.7k 1/16W Metal Oxide DUNTKA154DE12 R7361 VRS-CY1JF472J J 4.7k 1/16W Metal Oxide OUTPUT UNIT(Continued) R7362 VRS-CY1JF472J J 4.7k 1/16W Metal Oxide R7363 VRS-CY1JF101J J 100...
  • Page 120 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA154DE12 DUNTKA155DE12 OUTPUT UNIT(Continued) OUTPUT SUB UNIT FB1307 RBLN-0059CEZZ J Frrite Bead INREGRATED CIRCUITS FB2101 RBLN-0059CEZZ J Frrite Bead IC7401 VHiSNHC153T-1 J SN74HC153PW FB2201 RBLN-0059CEZZ J Frrite Bead...
  • Page 121 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA155DE12 DUNTKA157DE12 OUTPUT SUB UNIT(Continued) SIGNAL UNIT R7435 VRS-CY1JF000J 1/16W Metal Oxide INTEGRATED CIRCUITS R7437 VRN-CY1JF102D J 1.0k 1/16W Metal Film IC301 VHiTA8184F/-1 J TA8184F R7438 VRN-CY1JF103D...
  • Page 122 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code L4003 VP-1M270J3R8N J Peaking 27µH DUNTKA157DE12 L4501 VP-1M220J2R9N J Peaking 22µH SIGNAL UNIT(Continued) L4503 VP-1M4R7J1R2N J Peaking 4.7µH L6001 VP-1M270J3R8N J Peaking 27µH Q4004 VSiMX2/////-1 J iMX2...
  • Page 123 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C4303 VCCCCY1HH221J J 220p Ceramic DUNTKA157DE12 C4304 VCEAPF1CW106M J 10 Electrolytic SIGNAL UNIT(Continued) C4305 VCEAPF1CW106M J 10 Electrolytic C4306 VCEAPF1HW106M J 10 Electrolytic C844 VCKYCY1EF104Z J 0.1...
  • Page 124 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C6077 VCKYCY1EF104Z J 0.1 Ceramic DUNTKA157DE12 C6078 VCKYCY1EF104Z J 0.1 Ceramic SIGNAL UNIT(Continued) C6079 VCCCCY1HH330J J 33p Ceramic C6081 VCCCCY1HH470J J 47p Ceramic C4562 VCKYCY1EF104Z J 0.1...
  • Page 125 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R867 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide DUNTKA157DE12 R868 VRS-CY1JF392J J 3.9k 1/16W Metal Oxide SIGNAL UNIT(Continued) R869 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R870 VRS-CY1JF272J J 2.7k 1/16W Metal Oxide...
  • Page 126 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R4505 VRS-CY1JF000J 1/16W Metal Oxide DUNTKA157DE12 R4509 VRS-CY1JF391J J 390 1/16W Metal Oxide SIGNAL UNIT(Continued) R4510 VRS-CY1JF182F J 1.8k 1/16W Metal Oxide R4511 VRS-CY1JF182J J 1.8k 1/16W Metal Oxide...
  • Page 127 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R6097 VRS-CY1JF000J 1/16W Metal Oxide DUNTKA157DE12 R6098 VRS-CY1JF000J 1/16W Metal Oxide SIGNAL UNIT(Continued) R6101 VRS-CY1JF000J 1/16W Metal Oxide R6102 VRS-CY1JF000J 1/16W Metal Oxide R6012 VRS-CY1JF471J J 470...
  • Page 128 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA158DE12 RESISTORS R5580 VRS-CY1JF471J J 470 1/16W Metal Oxide R/C RECEIVER-1UNIT R5581 VRS-CY1JF220J J 22 1/16W Metal Oxide R5601 VRS-TV1JD221J J 220 1/16W Metal Oxide CAPACITOR R5602 VRS-CY1JF101J...
  • Page 129 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA160DE12 DUNTKA161FE12 LED UNIT INPUT UNIT TRANSISTORS INTEGRATED CIRCUITS Q2804 VSDTC144EU/-1 J DTC144EU IC401 VHiNJM2245M-1 J NJM2245M Q2805 VSDTC144EU/-1 J DTC144EU IC402 VHiNJM2245M-1 J NJM2245M Q2806 VSDTC144EU/-1...
  • Page 130 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code FL3003 RFiLN0003TAZZ J Filter DUNTKA161FE12 FL3051 RFiLN0003TAZZ J Filter INPUT UNIT(Continued) FL3052 RFiLN0003TAZZ J Filter FL3053 RFiLN0003TAZZ J Filter D603 RH-EX0226CEZZ J Zener Diode FL3351 RFiLN0003TAZZ J Filter...
  • Page 131 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C3210 VCKYCY1HB103K J 0.01 Ceramic DUNTKA161FE12 C3211 VCEAPF0JW476M J 47 6.3V Electrolytic INPUT UNIT(Continued) C3212 VCKYCY1HB103K J 0.01 Ceramic C3213 VCEAPF1CW226M J 22 Electrolytic C1411 VCEAPF1CW226M J 22...
  • Page 132 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1429 VRS-CY1JF103J J 10k 1/16W Metal Oxide DUNTKA161FE12 R1431 VRS-CY1JF103J J 10k 1/16W Metal Oxide INPUT UNIT(Continued) R1433 VRS-CY1JF103J J 10k 1/16W Metal Oxide R1435 VRS-CY1JF103J J 10k...
  • Page 133 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code FB601 RBLN-0062CEZZ J Ferrite Bead DUNTKA161FE12 FB602 RBLN-0062CEZZ J Ferrite Bead INPUT UNIT(Continued) FB603 RBLN-0062CEZZ J Ferrite Bead FB604 RBLN-0062CEZZ J Ferrite Bead R3171 VRS-CY1JF222J J 2.2k 1/16W Metal Oxide...

  • Page 134: Power Unit

    XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code RUNTK0668CEZZ RDENC0303CEZZ INLET UNIT POWER UNIT TRANSISTORS INTEGRATED CIRCUITS Q1701 9FJ0Q02001725 J 2SC4409 å IC701 9FJ0F01901340 J AN8027 Q1702 9FJ0Q00001345 J 2SA1972 IC702 9FJ0F01102285 J UPC1093TE Q1703 9FJ0Q02001755...
  • Page 135 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R712 9FJ0R91201285 J 2.2k 1/10W Chip RDENC0303CEZZ R713 9FJ0R91201335 J 5.6k 1/10W Chip POWER UNIT(Continued) R714 9FJ0R91201305 J 3.3k 1/10W Chip R715 9FJ0R91201325 J 4.7k 1/10W Chip...
  • Page 136 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code RDENC0303CEZZ CPCi-0042CE12 POWER UNIT(Continued) PC I/FUNIT RL1702 9FJ0H11501360 J Relay, VS5M-NR å INTEGRATED CIRCUITS 9FJ0O01001760 J Heat Sink IC8001 RH-iX3270CEZZ J HD6417709 9FJ0O01001770 J Heat Sink IC8002 9DK001-15061...
  • Page 137 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C8012 9DK001-42103 J 15p Ceramic CPCi-0042CE12 C8013 9DK001-42103 J 15p Ceramic PC I/FUNIT(Continued) C8014 9DK001-42096 J 0.01 Ceramic C8015 9DK001-42131 J 10 Ceramic D8025 9DK001-30015 J Diode MA157A C8016 9DK001-42094 J 0.1...
  • Page 138 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C8485 9DK001-42094 J 0.1 Ceramic CPCi-0042CE12 C8499 9DK001-42094 J 0.1 Ceramic PC I/FUNIT(Continued) C8500 9DK001-42111 Ceramic C8501 9DK001-42094 J 0.1 Ceramic C8148 9DK001-40089 J 47 6.3V Electolytic C8502 9DK001-42094 J 0.1...
  • Page 139 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C8763 9DK001-42094 J 0.1 Ceramic CPCi-0042CE12 C8764 9DK001-42094 J 0.1 Ceramic PC I/FUNIT(Continued) C8765 9DK001-42094 J 0.1 Ceramic C8766 9DK001-42094 J 0.1 Ceramic C8627 9DK001-42094 J 0.1...
  • Page 140 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R8368 9DK001-50162 J 56 1/16W Chip 1608 CPCi-0042CE12 R8387 9DK001-50162 J 56 1/16W Chip 1608 PC I/FUNIT(Continued) R8395 9DK001-50178 J 1.2k 1/16W Chip 1608 R8403 9DK001-50162 J 56...
  • Page 141 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R8869 9DK001-50275 J 6.8 1/16W Chip 1608 CPCi-0042CE12 R8873 9DK001-50110 1/10W Chip 2125 PC I/FUNIT(Continued) R8875 9DK001-50162 J 56 1/16W Chip 1608 R8878 9DK001-50110 1/10W Chip 2125...

  • Page 142: Cabinet And Mechanical Parts

    XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code 3-4-5 LHLDZ2158CEKZ J Holder CABINET AND MECHANICAL PARTS 3-4-6 LX-NZ3102CEFW J Nut 3-4-7 PCOVM9032CEKZ J Dust Cover, x2 3-4-8 PFiLD0117CEZZ J Filter Not Available – Top Cabinet Ass’y —...
  • Page 143 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code NSFTZ0145CEFW J Shaft CABINET AND MECHANICAL PARTS NSFTZ0159CEFW J Shaft (continued) NSFTZ0161CEFW J Shaft, x4 PSLDM4548CEFW J Shield CCOVA1785CE01 J Lens Cover, Top Ass’y PZETK0067CEKZ J Shield...

  • Page 144: Ë Cehäuse Und Mechanische Bauteile

    XG-V10XE Ref. No. CABINET AND MECHANICAL PARTS / Part No. Description Code Ref. No. Part No. Description Code GEÄUSE UND MECHANISCHE BAUTEILE 16-1 16-3 16-2 8-1-1 1-10 1-12 8-1-3 8-1-2 1-13 1-1-4 1-16 1-1-1 1-11 8-1-3 1-1-6 1-17 1-11 1-1-3...
  • Page 145 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code 6-51-1-1 LHLDZ3086CEFW J Handle OPTICS MECHANISM PARTS 6-51-1-2 PCASZ1037CEKZ J Lamp Case 6-51-1-3 PCOVZ1081CEKZ J Case Base 6-51-1-4 PSLDH3083CEFW J Shielding Plate CCHSK0087CE02 J Optics Macha Ass’y...
  • Page 146 XG-V10XE Ref. No. OPTICS MECHANISM PARTS/ Part No. Description Code Ref. No. Part No. Description Code TEILE FÜR OPTIKMECHANISMUS...

  • Page 147: Operation Manual

    XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code SERVICE JIGS SUPPLIED ACCESSORIES (Use for servicing) 9DASPN-XGNV1U J Spanna, 3.2mm ACCESSORIES (Off-set Cam Adjustment) CCOVA1789CE01 J Terminal Cover 9EQDRiVER-NV1A J Off-set Driver PFiLD0110CEZZ J Extra Air Filter (Focus Adjustment) å...
  • Page 148 XG-V10XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING OF THE SET / VERPACKEN DES GERÄTS Operation Manual Polystyrene Wireless R/C Unit Cover Extra Air Filter Sleeve Buffer Material AC Cord RGB Cable PS/2 Mouse Control Cable...
  • Page 149 Code Ref. No. Part No. Description Code COPYRIGHT © 2001 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
  • Page 150 Choisissez «Carte RS-422» et l’état de la carte RS-422 est displayed. affiché. Printed in Japan • See the operation manual of your Sharp projector for details. • Reportez-vous au mode d’emploi de votre projecteur Sharp pour plus de Imprimé au Japon détails.
  • Page 151 336/CEE y 73/23/CEE, modificadas por medio de la 93/68/ carte SDI est affiché. CEE. • See the operation manual of your Sharp projector for details. • Reportez-vous au mode d’emploi de votre projecteur Sharp pour plus de détails. Printed in Japan...

  • Page 152: Schematic Diagram

    Ë VERPACKUNGSTEILE ........8 » PACKING OF THE SET ........9 » VERPACKEN DES GERÄTS ......9 This document has been published to be used for after sales service only. SHARP CORPORATION The contents are subject to change without notice.

  • Page 153: Operation Manual

    Included Items The AN-L10T 10BASE-T board can be installed in an expan- sion slot on a Sharp projector to control the projector by 10BASE-T interface. Before installing and using this board, be sure to thoroughly read the operation manuals accompanying the projector and Sharp Advanced Presentation Software Professional Edition.

  • Page 154: Bedienungsanleitung

    Ma ßnahmen behoben werden sollten. Mitgelieferte Gegenstände Das AN-L10T 10BASE-T-Board kann in deinem Erweiterungssteckplatz eines Projektors von Sharp zur Steuerung des Projektors mit dem 10BASE-T-Interface installiert werden. Lesen Sie vor der Installation und Verwendung des Boards die Bedienungsanleitung des Projektors und der Sharp Advanced Presentation Software Professional Edition gründlich durch.
  • Page 155 AN-L10T Ë10 BASE-T BOARD / 10BASE-T-BOARD-EINHEIT...

  • Page 156: Printed Wiring Board Assemblies

    AN-L10T PRINTED WIRING BOARD ASSEMBLIES LEITERPLATTEN EINHEIT 10 BASE-T BOARD Unit (Wiring Side) 10 BASE-T-BOARD Einheit (Leiterbahnseite) 10 BASE-T BOARD Unit (Component Side) 10 BASE-T-BOARD Einheit (Bestückungsseite)

  • Page 157: Parts List

    3. ERSATZTEIL NR. 4. BESCHREIBUNG in USA: Contact your nearest SHARP Parts Distributor to order. For location of SHARP Parts Distributor, Please call Toll- Free; 1-800-BE-SHARP in CANADA: Contact SHARP Electronics of Canada Limited Phone (416) 890-2100. MARK: SPARE PARTS-DELIVERY SECTION MARKIERUNG : ERSATZTEILE-LIEFERUNG Ref.

  • Page 158: Supplied Accessories

    AN-L10T Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA369DE01 J9401 QJAKT0001CEZZ J Jack, 10BASE-T port P9401 QPLGN0564TAZZ J Plug, 5-pin 10BASE-T BOARD UNIT(Continued) PSLDM4623CEFW J Shield QEARP0112CEFW J Earth Shield R9427 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide LHLDZ9156CEZZ J Holder R9429 VRS-CY1JF101J...

  • Page 159: Verpacken Des Geräts

    AN-L10T PACKING OF THE SET VERPACKEN DES GERÄTS Plotter/ Plotter Screw/ Schrauben Pad/ Festes Buffer Material/ Polstermaterial Operation Manual/ Bedienungsanleitung Setting Manual/ Einstellunganleitung Guaranty/ Garantie Packing Case/ Karton Serial No. Label/ Serien-Nr.-Etikett...
  • Page 160 AN-L10T COPYRIGHT © 2001 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

Table of Contents