Motorola MC3090Z RFID Regulatory Information
Hide thumbs
Also See for MC3090Z RFID:
- User manual (62 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (6 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
MC3090Z RFID
Regulatory Information
®
®
Microsoft
Mobile
6.1
© 2012 Motorola Solutions, Inc. All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability, function, or
design.
Motorola does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any
patent right or patent, covering or relating to any combination, system, apparatus, machine,
material, method, or process in which Motorola products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Motorola products.
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty.
For Australia Only:
This warranty is given by Motorola Solutions Australia Pty Limited (ABN16 004 742 312) of Tally Ho
Business Park, 10 Wesley Court. Burwood East, Victoria. Our goods come with guarantees that
cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable loss or damage. You are
alsoentitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failuredoes not amount to a major failure. Motorola Solutions Australia's limited warranty above is in
addition to any rights and remedies you may have under the Australian Consumer Law. If you have
any queries, please call Motorola Solutions Australia at 1800 457 439. You may also visit our website:
http://www.motorola.com/Business/XA-EN/Pages/Contact_Us
for the most updated warranty
terms.
Motorola Solutions, Inc.
One Motorola Plaza
Holtsville, New York 11742, USA
1-800-927-9626
http://www.motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the property of their respective
owners. © 2012 Motorola Solutions, Inc.
72-125043-01 Revision C — July 2012
Health and Safety Recommendations
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. To prevent employee injury, consult with the local Health & Safety Manager
to ensure compliance with the required safety programs.
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures
Regulatory Information
All Motorola devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required.
Local language translations are available at the following website:
www.motorolasolutions.com/support.
Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void
the user's authority to operate the equipment.
Only use Motorola approved and UL Listed accessories, battery packs and battery chargers.
Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry
before connecting to an external power source.
Declared maximum operating temperature: 50 Degrees Centigrade
Radio Devices
This device is approved under the Motorola brand.
Model Numbers for Regulatory Certification:
MC3090Z - Frequency 902 - 928 MHz
MC3090ZE - Frequency 865 - 868 MHz
®
Bluetooth
Wireless Technology
This is an approved Bluetooth® product. For more information or to view End Product Listing, please
visit https://www.bluetooth.org/tpg/listings.cfm.
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the device signifying the radio is approved
for use in the following countries: United States, Canada, China, S. Korea, Australia, and Europe
Please refer to the Motorola Declaration of Conformity (DoC) for details of other country markings.
This is available at http://www.motorola.com/doc.
1
Note
: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic,
Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Operation of the device without regulatory approval is illegal.
Country Selection - Worldwide Version Only
Select only the country in which you are using the device. Any other selection will make the
operation of this device illegal.
Frequency of Operation - FCC
The range of channels is limited by firmware.
Country Roaming - Worldwide Version only
This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the
product operates on the correct channels for the particular country of use.
Ad-Hoc Operation
Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to
Indoor Use Only, any other use will make the operation of this device illegal.
Frequency of Operation – FCC and IC
5 GHz Only
The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250 MHz band is
restricted to Indoor Use Only; any other use will make the operation of this device illegal.
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels
is limited by firmware.
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your
device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight.
Safety in Hospitals
This device is not part of a life-support system.
Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
1
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or
healthcare facilities. These requests are designed to prevent possible interference with sensitive
medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between
a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with independent research and recommendations by Wireless
Technology Research.
Persons with pacemakers:
•
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned
ON.
•
Should not carry the device in a breast pocket.
•
Should use the ear furthest from the pacemaker to minimize the potential for interference.
•
If you have any reason to suspect that interference is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the operation
of your wireless product may interfere with the medical device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering human exposure to
electromagnetic fields from radio devices. For information on "International" human exposure to
eletromagnic fields refer to the Motorola Declaration of Conformity (DoC) at
http://www.motorola.com/doc
Europe
For RFID operation, to comply with EU RF exposure requirements, this device must be operated in the
hand with a minimum separation distance of 23cm or more from a person's body. Other operating
configurations should be avoided.
US and Canada
For RFID operation, to satisfy FCC RF exposure requirements, a mobile transmitting device must
operate with a minimum separation distance of 23cm or more from a person's body.
1
.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must
not be co-located or operating in conjunction with any other transmitter/antenna except those already
approved in this filing.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50,
dated June 24, 2007.
EN60825-1: 2007
IEC60825-1 (Ed. 2.0)
The laser classification is marked on one of the labels on the device.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such
as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2
laser is not known to be harmful.
Scanner Labeling
COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER NOTICE NO. 50,
DATED JUNE 24, 2007 AND IEC 60825-1 (Ed. 2.0) EN60825-1:2007
CAUTION- CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE INTO THE BEAM.
ATTENTION- LUMIÉRE LASER DE CLASSE 2 EN CAS D'OUVERTURE.
NE PAS REGARDER DANS LE FAISCEAU.
VORSICHT- LASERLICHT KLASSE 2, WENN ABDECKUNG GEÖFFNET. NICHT IN DEN STRAHL BLICKEN.
2
Power Supply
Use only a Motorola approved power supply, output rated 5.4 Vdc and minimum 3 A. The power
supply shall be Listed to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with SELV
outputs. Use of alternative power supply will invalidate any approval given to this device and may be
dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry battery
producing or importing firms in accordance with Article 15 of the Waste
Disposal Act are required to indicate the recycling marks on the batteries
used in sales, giveaway or promotion. Contact a qualified Taiwanese
recycler for proper battery disposal.
Battery Information
Motorola rechargeable battery packs are designed and constructed to the highest standards within the
industry.
However, there are limitations to how long a battery can operate or be stored before needing
replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality
may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to
prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for
one year or longer, the charge level should be verified at least once a year and charged to half of full
charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Motorola batteries is 30 days, regardless if the battery was purchased
separately or included as part of the mobile computer or bar code scanner.
Battery Safety Guidelines
•
The area in which the units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non commercial
environment.
•
Follow battery usage, storage, and charging guidelines found in the user's guide.
•
Improper battery use may result in a fire, explosion, or other hazard.
•
To charge the mobile device battery, the battery and charger temperatures must be between -4ºF
and +122 ºF (- 20 ºC and +50 ºC)
•
Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may
present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the
compatibility of a battery or a charger, contact Motorola Solutions support.
•
For devices that utilize a USB port as a charging source, the device shall only be connected to
products that bear the USB-IF logo or have completed the USB-IF compliance program.
•
Do not disassemble or open, crush, bend or deform, puncture, or shred.
•
Severe impact from dropping any battery-operated device on a hard surface could cause the
battery to overheat.
•
Do not short circuit a battery or allow metallic or conductive objects to contact the battery
terminals.
•
Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or
expose to water or other liquids, or expose to fire, explosion, or other hazard.
•
Do not leave or store the equipment in or near areas that might get very hot, such as in a parked
vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or
dryer.
•
Battery usage by children should be supervised.
•
Please follow local regulations to promptly dispose of used re-chargeable batteries.
•
Do not dispose of batteries in fire.
•
Seek medical advice immediately if a battery has been swallowed.
•
In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If
contact has been made, wash the affected area with large amounts of water and seek medical
advice.
•
If you suspect damage to your equipment or battery, contact Motorola Solutions support to arrange
for inspection.
Use with Hearing Aids
When some wireless devices are used near some hearing devices (hearing aids and cochlear
implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and wireless devices also vary in the amount of
interference they generate. In the event of interference you may want to consult your hearing aid
supplier to discuss solutions.
Radio Frequency Interference
Requirements-FCC
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
•
Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
3
Advertisement
Related Manuals for Motorola MC3090Z RFID
Summary of Contents for Motorola MC3090Z RFID
- Page 1 Health and Safety Recommendations Power Supply healthcare facilities. These requests are designed to prevent possible interference with sensitive Use only a Motorola approved power supply, output rated 5.4 Vdc and minimum 3 A. The power medical equipment. Ergonomic Recommendations supply shall be Listed to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with SELV...
- Page 2 10. LINKS TO THIRD PARTY WEBSITES. If the software provides links to third party The use of RFID Devices has varying restrictions for use within the EEA; please refer to the Motorola retournés à Motorola pour recyclage. Pour de plus amples informations sur le retour de produits, recognition errors are inherent in the process.