Reverting To The Previously Used Software Version - Cisco EX60 Administrator's Manual
Telepresence system
Hide thumbs
Also See for EX60:
- Administrator's manual (134 pages) ,
- User manual (75 pages) ,
- Installation manual (6 pages)
Table of Contents
Advertisement
Cisco TelePresence System EX Series
Contents
Reverting to the previously used
software version
If there is a severe problem with the video system, switching
to the previously used software version may help solving the
problem.
If the system has not been factory reset since the last
software upgrade, the previously used software image still
resides on the system; you do not have to download the
software again.
Reverting to the previously used software version should only
be done by a system administrator or in contact with Cisco
technical support.
We strongly recommend that you backup your system's log
files and configuration before you swap to the other software
image.
D14726.14 EX Series Administrator Guide TC7.1, APRIL 2014.
Introduction
Web interface
Web interface
Navigate to: Maintenance > System Recovery : Backup tab and Software Recovery Swap tab
1. Backing up log files and
system configuration
We recommend that you backup your
system's log files and configuration before
you swap to the other software image.
Click
Download Logs
Configuration Backup
instructions to save the files on your
computer.
System settings
and
Download
and follow the
49
Setting passwords
2. Reverting to the previously used
software version
1. Revert to the previously used software
version by clicking
Switch to software
TCx.y.z..., where x.y.z indicates the
software version.
2. Click
Yes
to confirm your choice, or
Cancel
if you have changed your mind.
Wait while the system resets. The
system will restart automatically when
finished.
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Hide quick links:
Advertisement
Chapters
Table of Contents
