Page 1
Blower Model RB 24EAP / RB 24EA RB 24EA (S) Handling instructions RB24EAP Note: Before using this machine, carefully read through these HANDLING INSTRUCTIONS to ensure effi cient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this machine.
MEANINGS OF SYMBOLS NOTE: Some units do not carry them. Symbols WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use. WARNING DANGER It is important that you read, fully Hot surfaces; The muffl er and understand and observe the following surrounding cover may become safety precautions and warnings.
fi ngers. If any symptoms of the ○ Keep others away when making carburetor adjustments. above appear, seek medical advice immediately. ○ Use only genuine Hitachi replacement parts as recommended ○ If you are using any medical electric/electronic devices such by the manufacturer.
*2: ANSI B175.2 ○ Use genuine two-cycle oil or use a mix between 25:1 to 50:1, * All data subject to change without notice. please consult the oil bottle for the ratio or Hitachi Authorized Service Centers. ASSEMBLY PROCEDURES ○ If genuine oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use (JASO Blow pipes to main body (Fig.
Starting ○ Do not allow the rope to snap back in and always hold the unit fi rmly. CAUTION Do not start if the pipe and guard net is obstructed. NOTE Check the switch (7) to ON position. (Fig. 4) If engine does not start, repeat procedures from 2 to 4.
Page 6
SKILL EXPERIENCED WELL TRAINED PEOPLE, RECOMMENDED TO TAKE THE UNIT TO HITACHI AUTHORIZED SERVICE CENTERS. Air fi lter (Fig. 11) The air fi lter must be cleaned from dust and dirt in order to avoid: ○ Carburetor malfunctions ○ Starting problems 0.6 mm...
Page 9
RB24EA / RB24EA (S) ITEM ITEM Code No. Q'TY REMARKS Code No. Q'TY REMARKS 6698384 M6×65 6684675 6693168 949432 6693227 6698376 ––––––– 6698374 6696471 6698362 6698398 M4×16 6684584 BMR7A 6684672 "68-75" (S) TYPE 6698365 6684679 (S) TYPE 6698363 6684678 (S) TYPE 6698385 M4×12 6684677...