hit counter script
LG AN110B-JD Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Projector
  5. AN110B-JD
  6. Owner's manual
LG AN110B-JD Owner's Manual

LG AN110B-JD Owner's Manual

Lg dlp projector owner's manual
Hide thumbs Also See for AN110B-JD:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
Please read this manual carefully before operating
your set. Retain it for future reference.
Record model number and serial number of the set
below.
See the label attached on the bottom of the set and
quote this information to your dealer if you require
service.
Model number
:
Serial number
:
AN110B-JD
AN110W-JD
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for LG AN110B-JD

Summary of Contents for LG AN110B-JD

  • Page 1 Retain it for future reference. Record model number and serial number of the set below. See the label attached on the bottom of the set and quote this information to your dealer if you require service. Model number Serial number AN110B-JD AN110W-JD OWNER’S MANUAL...
  • Page 2 DLP PROJECTOR DLP PROJECTOR FCC NOTICE • A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 3: Table Of Contents

    Contents Introduction Safety Instructions ...4 Part Descriptions Main Body ...7 Control Panel ...8 Remote Control ...9 Installing Batteries...9 Projector Status Indicators...10 Accessories...11 Optional Extras ...11 Installing and Composition Installation Instructions ...12 Basic Operation of the Projector...13 Installing the projector to the wall ...14 Turning on the Projector ...20 Turning off the Projector ...20 Selecting source mode ...20...

  • Page 4: Safety Instructions

    Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ➟ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may cause light injuries or damage to the projector.
  • Page 5 Power Do not plug too many devices into one outlet. It may result in overheating of the outlet and causes a fire hazard ! Power Never touch the power plug with a wet hand This may cause an electric shock hazard ! Do not plug in when the power cord or the plug is damaged or...
  • Page 6 Using Never touch the wall outlet when there is leakage of gas, open the windows and ventilate. It can cause a fire or a burn by a spark. Using Do not place heavy objects on top of projector. This may cause mechanical failure or personal injury! Do not use any sharp tools on the projector as this will damage the casing.

  • Page 7: Part Descriptions

    Part Descriptions Main Body * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction.

  • Page 8: Control Panel

    Part Descriptions Control Panel MENU Button SOURCE Button OK Button FOCUS +/- Button ZOOM +/- Button POWER Button...

  • Page 9: Remote Control

    Remote Control POWER Button AUTO Button (Refer to p.34) STILL Button (Refer to p.33) BLANK Button (Refer to p.31) KEYSTONE +/- Button (Refer to p.31) FOCUS Button (Refer to p.21) Installing Batteries CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

  • Page 10: Projector Status Indicators

    Projector Status Indicators * Lamp Indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector. Orange Green(flashing) Green Operation Indicator Orange(flashing) Lamp Indicator Red(flashing) Green(flashing) Orange(flashing) Orange Temperature Indicator Red (flashing) * If operation indicator is red, it’s state of checking the closed door or shutter.

  • Page 11: Accessories

    Accessories POWER AUTO SOURCE STILL MENU BLANK KEYSTONE FOCUS ZOOM LIGHT 2 Batteries (size AAA) Remote Control Computer Cable RCA to D-Sub Adaptor Optional Extras * Contact your dealer to purchase these items. * Contact your service personnel for replacing a new lamp. * Projector lamp is reaching the end of its life and needs to be replaced with a new lamp.

  • Page 12: Installing And Composition

    Installation and Composition Installation Instructions * Don’t place the projector in the following conditions. It may cause malfunction or product damage. Provide proper ventilation for this projector. The projector is equipped with ventilation holes(intake) on the bottom and ventilation holes(exhaust) on the front. do not block or place anything near these holes, or internal heat build-up may occur, causing picture degradation or damage to the projector.

  • Page 13: Basic Operation Of The Projector

    Basic Operation of the Projector 1.Place the projector on a wall. 2.Place the projector the correct distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked.

  • Page 14: Installing The Projector To The Wall

    Installing the projector to the wall Safety instructions on installing the wall Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ➟ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death.
  • Page 15 Accessories for wall mounting bracket Wall mounting bracket Bolts for wall mounting bracket Installing Wall mounting bracket Detach the products - Detach bolt from wall mounting bracket. - Detach product fixing bracket from Wall mounting bracket. ➡ Press the upper of the wall bracket with both hands to tilt the bracket.
  • Page 16 Insert anchors or bolts for using the wood after marking the positions where products are mounted on the wall Check the surface or thickness that the wall mounting bracket. Ó When the surface that the wall mounting bracket is concrete, strong , weak natural rock, brick and hollow block, Ó...
  • Page 17 Installing and Composition Install the wall mounting bracket on the wall Using the wall anchor bolt sleeves and bolts for wall mounting bracket a. Mount the wall mounting bracket on the wall as setting the hole. b. Insert the bolts for wall mounting bracket as setting the each hole. Bolt for wall mounting bracket Using the bolts for using the wood Only making wood into wall, you can use.
  • Page 18 Assemble the projector with the wall mounting bracket Assemble a projector with the wall mounting bracket installed on the wall as below Fig. Do not install this product by yourself. Ó Get some help from others. It may cause the product to fall and could cause injuries. a.
  • Page 19 Installing and Composition Adjusting Tilt Angle - Adjustable angle range is 5°(upside/downside/left/right) and turn range is ±10. - Do not adjust tilt angle with too much force. It may cause damage of product or could cause injuries. <Adjusting Tilt Angle> <Turn>...

  • Page 20: Turning On The Projector

    Turning on the Projector 1. Connect power cord correctly. 2. Press the POWER button on the remote control or top cover. (Green operation indicator flashes during cooling of the lamp.) When projector is turned on, auto sliding door and shutter are opened, automatically. It will take about 25 second to display the picture after power on because the projector lamp has to warm up.

  • Page 21: Focus, Zoom, Position Of The Screen Image

    Focus, Zoom, Position of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen. Adjust the focus by using FOCUS button of the remote control or the control panel. FOCUS Focus Zoom Adjust the screen size by using ZOOM button of the remote control or the control panel.

  • Page 22: Connection

    Connection Connecting to a Desktop PC * You can connect the projector to a computer that has VGA, SVGA, XGA and SXGA output. * Refer to page 41 for the supported monitor displays of the projector. < How to connect > a.

  • Page 23: Connecting To A Video Source

    Connecting to a Video Source * You can connect a VTR, a camcorder, a LDP or any other compatible video image source to the projector. < How to connect 1 > a. Connect the Video input jacks of the projector to the output jacks of the A/V source with Video cable.

  • Page 24: Connecting To A D-Tv Set-Top Box

    Connecting to a D-TV Set-Top Box * To receive Digital TV (D-TV) programs, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector. * Please refer to the owner's manual of the D-TV Set-Top Box for the connection between projector and D-TV Set-Top Box.

  • Page 25: Hdmi

    HDMI - HDMI , the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing." - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolution.

  • Page 26: Function

    Function * In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just example to help with the Projector operation. * If there is no input signal present, the Menu will not be displayed on the screen. * This operating guide explains operation of RGB(PC) mode mainly.

  • Page 27: Auto Color Temperature Control

    Auto Color Temperature Control - To initialize values (reset to default settings), select the 1. Press the MENU button and then use 2. Press the button and then use D , E 3. Press the button and then use 4. Press the OK button to save.

  • Page 28: White Peaking Function

    White peaking Function 1. Press the MENU button and then use 2. Press the button and then use 3. Press the button to adjust the screen condition as you want. 4. Press the OK button to save. It’s available to adjust [White peaking] in RGB(PC) and HDMI(DVI) mode only. The default value may changed based on input mode.

  • Page 29: Special Menu Options

    Special Menu Options Selecting Language 1. Press the MENU button and then use 2. Press the button and then use 3. Press the button and then use to use. 4. Press the OK button to save. On-Screen-Display (OSD) is marked in the selected language from this point. To exit the menu display, repeatedly, press the MENU button.

  • Page 30: Flip Horizontal Function

    Flip horizontal Function * This function reverses the projected image horizontally. Use this function when rear projecting an image. 1. Press the MENU button and then use 2. Press the button and then use 3. Press the button to see reversed image. Each time you press the button, the image will be reversed.

  • Page 31: Using Keystone Function

    Special Menu Options Using Keystone function * Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. * Only use the Keystone function when you can’t get the best angle of projection, because it may cause a blazing fire of the screen.

  • Page 32: Selecting Blank Image Color

    Selecting Blank image color 1. Press the MENU button and then use 2. Press the button and then use 3. Press the button and then use 4. Press the OK button to save. Background color will be changed to the selected Blank function color from this point.

  • Page 33: Tilt Function

    Tilt function 1. Press the MENU button and then use 2. Press the button and then use 3. You can check tilt state of the projector. If tilt state is out of the safety area(avobe 15°), warning message is displayed and then automatically, power turns off.

  • Page 34: Screen Menu Options

    Screen Menu Options Auto configure Function * This function assures you of getting the best video quality by automatically adjusting the difference of horizontal size and synchronization of the image. * Auto Tracking function works in RGB input only. 1. Press the AUTO button. Image positioning and synchronization are automatically adjusted.

  • Page 35: Using Zoom Function

    Using ZOOM function 1. Press the MENU button and then use 2. Press the button and then use 3. Press the button and then use condition as you want. Zoom + adjustment range is 100% ~ 250%. To exit the menu display, repeatedly, press the MENU button. Screen Position * You are available o this function after adjusting Zoom +/-.

  • Page 36: Rs-232C

    External Control Device Setup * Connect the RS-232C input jack to an external control device (such as a computer or a video control system) and control the Projector’s functions externally. SET ID 1. Press the MENU button and then use 2.
  • Page 37 Command Reference List 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Contrast 06. Brightness 07. Color 08. Tint 09. Sharpness 10. OSD Select 11. Remote Control Lock / Key Lock 12. Color Temperature 13. Low Power 14.
  • Page 38 01. Power (Command2:a) ➜ To control Power On/Off of the Projector. Transmission [k] [a] [ ] [Set ID] [ ] [Data] [Cr] Data 0 : Power Off 1 : Power On [a] [ ] [Set ID] [ ] [OK] [Data] [x] Data 0 : Power Off 1 : Power On ➜...
  • Page 39 06. Brightness (Command2:h) ➜ To adjust screen brightness. Transmission [k] [h] [ ] [Set ID] [ ] [Data] [Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. [h] [ ] [Set ID] [ ] [OK] [Data] [x] Data Min : 0 ~ Max : 64 07.
  • Page 40 12. Color Temperature (ACC) (Command2:u) ➜ Adjust the color temperature. Transmission [k] [u] [ ] [Set ID] [ ] [Data] [Cr] Data 0 : Normal 1 : Cool 2:Warm [u] [ ] [Set ID] [ ] [OK] [Data] [x] Data 0 : Normal 1 : Cool 2:Warm 13.

  • Page 41: Information

    Supported Monitor Display * The following table lists the display formats supported by the projector. Sources Format Vertical Freq.(Hz) VGAEGA 640X350 70.090Hz 640X350 85.080Hz PC98 / VGA text 640X400 70.090Hz 640X400 85.080Hz 720X400 70.082Hz 720X400 85.039Hz 640X480 59.940Hz 640X480 72.800Hz 640X480 75.00Hz 640X480...

  • Page 42: Maintenance

    Maintenance * The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to be replaced, contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first.

  • Page 43: Replacing The Lamp

    - Never touch the lamp unit glass or otherwise image quality may be worse or lamp life may be reduced. To obtain a replacement Lamp unit Lamp model number is on page 47. Check the lamp model and then purchase it at LG Electronics Service Center. Using other lamp may cause damage to the projector.
  • Page 44 Replacing the Lamp Turn off the projector and unplug the power cable. Carefully place the lens side down on a cushioned surface that will protect the lens from damage. (Allow the lamp to cool for 1 hour before replacing it.) After lifting the lamp cover off, remove the two retaining screws on the lamp case with a screw- driver or similar objects.

  • Page 45: Memo

    Information Memo...
  • Page 46 Information Memo...

  • Page 47: Specifications

    In operation : 32~104°F(0°C~40°C) In storage and transit : -4~140°F(-20°C~60°C) humidity In operation : 0~ 80% relative humidity by dry hygrometer Not in operation : 0 ~ 90% relative humidity by dry hygrometer AN110B-JD/AN110W-JD 1280(Horizontal) x 768(Vertical)pixel 15:9(horizontal:vertical) 0.65 inches 1.01~5.08m(40~200 inches) 1:1.4...
  • Page 48 P/NO : 3828VA0577A a...

This manual is also suitable for:

An110w-jdAn110w

Table of Contents