Table of Contents
Advertisement
Available languages
Available languages
10
MAINTENANCE
CLEANING THE COMfORT PANELS
• Pull the Comfort Panel to open it.
• Disconnect the panel from the hood canopy by sliding
the fixing pin lever.
• The comfort panel must never be washed in a dish-
washer.
• Clean the outside by using a damp cloth and neutral
liquid detergent.
• Clean the inside as well by using a damp cloth and
neutral detergent; do not use wet cloths or sponges,
or jets of water; do not use abrasive substances.
• When the above operation has been completed, hook
the panel back to the hood canopy and close it by
turning the knob in the opposite direction.
METAL GREASE fILTERS
Filters can be washed in the dish machine. They need
to be washed when F-sign appears on the display or in
any case every 2 months, or even more frequently in
case of particularly intensive use of the hood.
Alarm reset
• Switch off the hood and the lights.
• Press the D-key till the display is unlit.
Cleaning the filters
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them towards
the back side of the hood unit and simultaneously
pulling downwards.
• Any kind of bending of the filters has to be avoided
when washing them. Before fitting them again into
the hood make sure that they are completely dry.
(The colour of the filter surface may change through-
out the time but this has no influence to the filter
efficiency).
• When fitting the filters into the hood pay attention
that they are mounted in correct position the handle
facing outwards.
• Close the comfort panel.
EN
Advertisement
Chapters
Table of Contents
