Table of Contents
Advertisement
Available languages
Available languages
Charcoal filter
• The charcoal filter should only be used if you want to use the hood in
the recirculation function.
• To do this you will need an original charcoal filter (available from your
local Service Force Centre).
• Replacing the charcoal filter
The charcoal filter cannot be washed nor regenerated.
The charcoal filter should be replaced every 4 months under normal
use.
Replacement filters are available from your local Service Force
Centre.
• Fitting - Fig. 4
Remove the grease filter.
Position the carbon filter so that it is covering the motor assembly
compartment and fix the filter in place using the 2 screws supplied
with the cooker hood.
Refit the grease filter.
• To remove proceed in the reverse order.
• Always specify the hood model code number and serial number when
ordering replacement filters. This information is shown on the
registration plate located on the inside of the unit.
• The charcoal filter can be ordered from your local Service Force
Centre.
50
Fig. 4
!
Rear right-
hand corner
Advertisement
Chapters
Table of Contents
