If You Are Having Difficulty With Your Machine - Brother FAX-2920 User Manual
Hide thumbs
Also See for FAX-2920:
- Service manual (321 pages) ,
- User manual (161 pages) ,
- Quick setup manual (13 pages)
Table of Contents
Advertisement
If you are having difficulty with your machine
If you think there is a problem with the way your faxes look, make a copy first. If the copy looks
good, the problem is probably not your machine. Check the chart below and follow the
troubleshooting tips.
The Brother Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com.
DIFFICULTY
Printing or Receiving Faxes
• Condensed print
• Horizontal streaks
• Top and bottom of sentences are
cut off.
• Missing lines
Poor print quality.
Vertical black lines when receiving
Received faxes appear as split or
blank pages.
Phone Line or Connections
Dialling does not work.
The machine does not answer
when called.
SUGGESTIONS
Usually this is caused by a poor telephone connection. If your copy looks good,
you probably had a bad connection with static or interference on the telephone
line. Ask the other party to send the fax again.
See Improving the print quality on page 11-15.
Sometimes you may see vertical streaks/black lines on the faxes you receive.
Your machine's primary corona wire may be dirty, or the sending party's fax
scanner may be dirty. Clean your primary corona wire (See Cleaning the corona
wire on page 11-23), or ask the sender to make a copy to see if the problem is with
the sending machine. Try receiving from another fax machine. If the problem
continues, call Brother or your dealer for service.
If the received faxes are divided and printed on two pages or if you get an extra
blank page, your Paper Size setting may not be correct for the paper you are
using. (See Setting the Paper Size on page 2-5.) Make sure that auto reduction
menu setting is turned on. (See Printing a reduced incoming fax (Auto Reduction)
on page 4-4.)
Check for a dial tone. Change Tone/Pulse setting. (See Tone or Pulse on page
5-4.) Check all line cord connections. Check power cord connection. If an external
phone is connected to the machine, send a manual fax by lifting the handset of the
external phone and dialling the number. Wait to hear fax receiving tones before
pressing Start.
Make sure the machine is in the correct receiving mode for your setup.
(See Basic sending operations on page 3-4.) Check for a dial tone. If possible, call
your machine to hear it answer. If there is still no answer, check the telephone line
cord connection. If there is no ringing when you call your machine, ask your
telephone company to check the line.
Troubleshooting and routine maintenance
11
11 - 10
Advertisement
Table of Contents
