hit counter script
Sony CDX-M3DI Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Car Receiver
  5. CDX-M3DI (XT-XM1)
  6. Service manual

Sony CDX-M3DI Service Manual

Fm/mw/lw compact disc player
Hide thumbs Also See for CDX-M3DI:
Table of Contents

Advertisement

Quick Links

See also: Operating and Installation Instruction
CDX-M3DI/M1000TF
SERVICE MANUAL
Ver 1.0 2003. 03
• The tuner and CD sections have no adjustments.
AUDIO POWER SPECIFICATIONS (US Model)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
23.2 watts per channel minimum continuous average power into
4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more
than 5% total harmonic distortion.
CD player section
Signal-to-noise ratio
90 dB
Frequency response
10 – 20,000 Hz
Wow and flutter
Below measurable limit
Tuner section
FM
Tuning range
87.5 – 107.9 MHz (US, Canadian Model)
87.5 – 108.0 MHz (AEP, UK Model)
Antenna terminal
External antenna connector
Intermediate frequency 10.7 MHz/450 kHz
Usable sensitivity
9 dBf
Selectivity
75 dB at 400 kHz
Signal-to-noise ratio
67 dB (stereo),
69 dB (mono)
Harmonic distortion at 1 kHz
0.5% (stereo),
0.3% (mono)
Separation
35 dB at 1 kHz
Frequency response
30 – 15,000 Hz
AM (US, Canadian Model)
Tuning range
530 – 1,710 kHz
Antenna terminal
External antenna connector
Intermediate frequency 10.7 MHz/450 kHz
Sensitivity
30 µV
Sony Corporation
9-877-152-01
2003C0400-1
e Vehicle Company
© 2003. 03
Published by Sony Engineering Corporation
Photo: CDX-M1000TF
Model Name Using Similar Mechanism
CD Drive Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
MW/LW (AEP, UK Model)
Tuning range
Aerial terminal
Intermediate frequency 10.7 MHz/450 kHz
Sensitivity
Power amplifier section
Outputs
Speaker impedance
Maximum power output 52 W × 4 (at 4 ohms)
General
Outputs
Inputs
FM/AM COMPACT DISC PLAYER
FM/MW/LW COMPACT DISC PLAYER
US Model
Canadian Model
AEP Model
UK Model
CDX-M1000TF
CDX-MP40
MG-393MC-121
KSS-721A
MW : 531 – 1,602 kHz
LW : 153 – 279 kHz
External aerial connector
MW : 30 µV
LW : 40 µV
Speaker outputs
(sure seal connectors)
4 – 8 ohms
Audio outputs (front/rear)
Subwoofer output (mono)
Power antenna relay control terminal
Power amplifier control terminal
Telephone ATT control terminal
Illumination control terminal
BUS control input terminal
BUS audio input/AUX IN terminal
Remote controller input terminal (CDX-M1000TF only)
Antenna input terminal
– Continued on next page –
US, Canadian Model
AEP, UK Model
CDX-M3DI
1

Advertisement

Table of Contents
loading

Related Manuals for Sony CDX-M3DI

Summary of Contents for Sony CDX-M3DI

  • Page 1 530 – 1,710 kHz Antenna terminal External antenna connector Intermediate frequency 10.7 MHz/450 kHz US, Canadian Model Sensitivity 30 µV FM/MW/LW COMPACT DISC PLAYER AEP, UK Model Sony Corporation 9-877-152-01 2003C0400-1 e Vehicle Company © 2003. 03 Published by Sony Engineering Corporation...
  • Page 2 NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
  • Page 3 CDX-M3DI/M1000TF Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable NOTE FOR THE OPENING OF THE FRONT PANEL CDs) In this set, the front panel is lowered to below the bottom face when This unit can play the following discs: it is opened.

  • Page 4: Table Of Contents

    CDX-M3DI/M1000TF TABLE OF CONTENTS 1. GENERAL Location of Controls (CDX-M3DI) ........5 Location of Controls (CDX-M1000TF) ........5 Connections (CDX-M3DI) ............6 Connections (CDX-M1000TF) ..........7 2. DISASSEMBLY 2-1. Front Panel Assy ............... 10 2-2. Sub Panel (CD) Assy ............10 2-3.

  • Page 5: General

    CDX-M3DI/M1000TF SECTION 1 GENERAL This section is extracted from instruction manual. (CDX-M3DI) (CDX-M1000TF)

  • Page 6: Connections (Cdx-M3Di)

    CDX-M3DI/M1000TF Connections (CDX-M3DI)

  • Page 7: Connections (Cdx-M1000Tf)

    CDX-M3DI/M1000TF Connections (CDX-M1000TF)
  • Page 8 CDX-M3DI/M1000TF...

  • Page 9: Disassembly

    CDX-M3DI/M1000TF SECTION 2 DISASSEMBLY Note : This set can be disassemble according to the following sequence. 2-1. FRONT PANEL ASSY 2-8. CHASSIS (T) SUB ASSY (Page 10) (Page 13) 2-2. SUB PANEL (CD) ASSY 2-9. LEVER SECTION 2-10. SERVO BOARD...

  • Page 10: Front Panel Assy

    CDX-M3DI/M1000TF Note : Follow the disassembly procedure in the numerical order given. 2-1. FRONT PANEL ASSY 1 screws (thin head M1.4) 3 cover (FPC) 2 screws (thin head M1.4) 4 CN201 (Take care not to pull the flexible board excessively) 5 front panel assy 2-2.

  • Page 11: Cd Mechanism Block

    CDX-M3DI/M1000TF 2-3. CD MECHANISM BLOCK 4 CD mechanism block 5 PTT 2.6x6 6 bracket (CD) 2 PTT 2.6x4 1 PTT 2.6x4 3 CN402 2-4. DIGITAL BOARD 2 PTT 2.6x6 ground point 3 DIGITAL board 1 CN801...

  • Page 12: Cam Block Assy, Motor Block Assy

    CDX-M3DI/M1000TF 2-5. CAM BLOCK ASSY, MOTOR BLOCK ASSY 4 PTT 2.6x6 5 cover (protection) 1 PTT 2.6x6 6 motor block assy 2 cam block assy 3 CN601 2-6. MAIN BOARD 3 PTT 2.6x6 ground point 4 PTT 2.6x6 ground point 1 PTT 2.6x8...

  • Page 13: Fan, Chassis Back

    CDX-M3DI/M1000TF 2-7. FAN, CHASSIS BACK qf duct (fan) assy qg fan qh CN802 qj heat sink 3 CN302 qs PTT 2.6x8 qa PTT 2.6x8 7 CN201 0 PTT 2.6x8 9 PTT 2.6x12 6 Removal the solder. qd PTP 2x18 8 PTT 2.6x8...

  • Page 14: Lever Section

    CDX-M3DI/M1000TF 2-9. LEVER SECTION 5 guide (disc) 6 lever (R) 3 tension spring (LR) 7 lever (L) 1 special screw 2 DISC IN SW board 4 two claws 2-10. SERVO BOARD 9 SERVO board 8 special screw 7 special screws 3 Removal the solders.

  • Page 15: Shaft Roller Assy, Load Sw Board

    CDX-M3DI/M1000TF 2-11. SHAFT ROLLER ASSY, LOAD SW BOARD • When installing, take note of the positions arm (roller) and washers. (Fig. 1) 3 retaining ring (RA) shaft retainer (roller) shaft retainer (roller) 4 shaft retainer (roller) washer washer retaining ring (RA) arm Fig.

  • Page 16: Floating Block Assy

    CDX-M3DI/M1000TF 2-12. FLOATING BLOCK ASSY 6 floating block assy 7 compression spring (FL) 1 tension spring (KF1) 8 compression spring (FL) 5 Turn loading ring in the direction of the arrow. 4 Fit lever (D) in the direction of the arrow.

  • Page 17: Phase Alignment

    CDX-M3DI/M1000TF SECTION 3 PHASE ALIGNMENT 3-1. GEAR (CAM L) • Align the gear (cam L) position setting hole with the center mark on the bracket before screwing the motor block assy to the mechanism chassis. gear (cam L) position setting hole...

  • Page 18: Diagrams

    CDX-M3DI/M1000TF SECTION 4 DIAGRAMS 4-1. IC PIN DESCRIPTIONS • IC5 CXD9684R-005 (DSP) (SERVO Board (1/2)) Pin No. Pin Name Pin Description /RESET Reset signal input (L: reset) MIMD Microcomputer interface mode selection signal input (H: I2C, L: TSB) (Fixed at H)
  • Page 19 CDX-M3DI/M1000TF • IC3 HD6432238RWN35TEI (CD MASTER CONTROL) (SERVO Board (2/2)) Pin No. Pin Name Pin Description TEST Test mode selection signal input (Open) DECXRST Reset signal output for DSP IC (L: reset) DECSTBY Standby mode control signal output for DSP IC (H: standby)
  • Page 20 LINK OFF signal output (L: link on, H: link off) UNI_SO SONY-BUS serial data output UNI_SI SONY-BUS serial data input UNI_CK SONY-BUS serial clock signal input Not used (Open) I2C interface data input/output I2C interface clock signal output Not used (Open) Serial data output for digital servo IC...
  • Page 21 Not used (Open) VOLATT Electronic volume mute signal output RAMBU RAM reset detection signal input SONY-BUS audio in/AUX audio in selection control signal output (H: SONY-BUS HSTX Hardware standby signal input UNI_AU audio, L: AUX audio) Operation mode input 2 (Fixed at L) —...

  • Page 22: Block Diagram -Cd Section

    CDX-M3DI/M1000TF 4-2. BLOCK DIAGRAM — CD SECTION — RF AMP,DIGITAL SERVO DIGITAL SIGNAL PROCESSOR OPTICAL PICK-UP KSS-721A (Page 23) MAIN SECTION LOUT ROUT CONV CD MASTER CONTROL DEMOD 5V 3.3V PACK 38 PACK TSTB 34 TSTB DSUB CODE TSCK PROCESS CONV.

  • Page 23: Block Diagram -Main Section

    CDX-M3DI/M1000TF 4-3. BLOCK DIAGRAM — MAIN SECTION — AUDIO AMP POWER AMP IC301 IC305 CN101 (1/2) MUTE CN301-1,-2 BUS AUDIO MUTE R-CH INPUT SELECT, IN/AUX IN CONTROL EQ AMP ELECTRIC VOLUME Q702 R-CH BUFFER IC404 IC400 BUS-GND SW Q301 IC303...

  • Page 24: Block Diagram -Display Section

    CDX-M3DI/M1000TF 4-4. BLOCK DIAGRAM — DISPLAY SECTION — SYSTEM CONTROL DIGITAL BOARD IC501 (2/2) Q410 IC405 CD ON CDON_IN OPEN EJECTOK OPENREQ RGB DRIVE DP_PW CLOSE IC207 IC406 SH3SO/FLSSO MASTER RXD D411,413 59-54 IC801 DRIVE TRAY LED_ON 12-16 52-47 R.G.B R.G.B...

  • Page 25: Circuit Boards Location

    CDX-M3DI/M1000TF 4-5. CIRCUIT BOARDS LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) DISC IN SW board SERVO board for schematic diagram: • All capacitors are in µF unless otherwise noted. pF: µµF...

  • Page 26: Printed Wiring Board -Cd Mechanism Section (1/2)

    CDX-M3DI/M1000TF 4-6. PRINTED WIRING BOARD — CD MECHANISM SECTION (1/2) — • Refer to page 25 for Common Note on Printed Wiring Boards. • Semiconductor Location (Side B) Ref. No. Location IC12 R114 R121 R105 R107 IC12 R130 JR14...

  • Page 27: Printed Wiring Boards -Cd Mechanism Section (2/2)

    CDX-M3DI/M1000TF 4-7. PRINTED WIRING BOARDS — CD MECHANISM SECTION (2/2) — • Refer to page 25 for Common Note on Printed Wiring Boards. • Semiconductor Location (Side A) Ref. No. Location R118 R111 R109 R100 R117 (Page 31) R148 R102...

  • Page 28: Schematic Diagram -Cd Mechanism Section (1/2)

    CDX-M3DI/M1000TF 4-8. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (1/2) — • Refer to page 25 for Waveforms and Common Note on Schematic Diagram, and page 38 for IC Block Diagrams. Note: • Voltage is dc with respect to ground under no-signal conditions.

  • Page 29: Schematic Diagram -Cd Mechanism Section (2/2)

    CDX-M3DI/M1000TF 4-9. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (2/2) — • Refer to page 25 for Waveforms and Common Note on Schematic Diagram, and page 38 for IC Block Diagrams. (Page 28) R105 (Page 28) C114 TP92 IC B/D TP31...

  • Page 30: Printed Wiring Board -Main Section (1/2)

    CDX-M3DI/M1000TF 4-10. PRINTED WIRING BOARD — MAIN SECTION (1/2) — • Refer to page 25 for Common Note on Printed Wiring Boards. FAN691 • Semiconductor Location (Side A) Ref. No. Location Ref. No. Location D202 IC801 R801 Q805 D303 R805...

  • Page 31: Printed Wiring Boards -Main Section (2/2)

    CDX-M3DI/M1000TF 4-11. PRINTED WIRING BOARDS — MAIN SECTION (2/2) — • Refer to page 25 for Common Note on Printed Wiring Boards. CN301 M3DI CNJ101 CN401 CN101 C359 C232 IC305 F901 C346 R342 Q306 R404 CN302 R302 CN303 R406 C711...

  • Page 32: Schematic Diagram -Main Section (1/4)

    CDX-M3DI/M1000TF 4-12. SCHEMATIC DIAGRAM — MAIN SECTION (1/4) — • Refer to page 25 for Waveforms and Common Note on Schematic Diagram, and page 38 for IC Block Diagrams. C339 R331 R338 Q302 C347 CN302 R339 C340 R332 Q303 C348...

  • Page 33: Schematic Diagram -Main Section (2/4)

    CDX-M3DI/M1000TF 4-13. SCHEMATIC DIAGRAM — MAIN SECTION (2/4) — • Refer to page 25 for Common Note on Schematic Diagram. CN802 Q806 R807 FAN691 R806 R805 R804 R315 C804 R803 R328 R314 C315 Q804 Q805 C802 C358 R801 R802 C803...

  • Page 34: Schematic Diagram -Main Section (3/4)

    CDX-M3DI/M1000TF 4-14. SCHEMATIC DIAGRAM — MAIN SECTION (3/4) — • Refer to page 25 for Waveforms and Common Note on Schematic Diagram, and page 40 for IC Block Diagrams. (Page 32) Note: • Voltage is dc with respect to ground under no-signal JR114 (detuned) condition.

  • Page 35: Schematic Diagram -Main Section (4/4)

    CDX-M3DI/M1000TF 4-15. SCHEMATIC DIAGRAM — MAIN SECTION (4/4) — • Refer to page 25 for Waveforms and Common Note on Schematic Diagram, and page 41 for IC Block Diagrams. (Page 33) L101 C125 Q110 IC B/D R124 C123 C122 R125...

  • Page 36: Printed Wiring Boards -Display Section

    CDX-M3DI/M1000TF 4-16. PRINTED WIRING BOARDS — DISPLAY SECTION — • Refer to page 25 for Common Note on Printed Wiring Boards. TH200 D201 D203 S200 S201 D204 D202 S202 S210 D208 S203 S204 S207 S209 S205 S206 • Semiconductor Location Ref.

  • Page 37: Schematic Diagram -Display Section

    CDX-M3DI/M1000TF 4-17. SCHEMATIC DIAGRAM — DISPLAY SECTION — • Refer to page 25 for Common Note on Schematic Diagram and page 41 for IC Block Diagrams. T200 CN200 L201 Q206 R200 R234 R272 R203 C202 R218 IC200 R202 C211 C203...

  • Page 38: Ic Block Diagrams

    CDX-M3DI/M1000TF 4-18. IC BLOCK DIAGRAMS IC1 µPD63711GC-8EU IC2 BA5810FP-E2 IC12 TC7SH08FU-TE85R BIAS IN B 71 70 IN A LOADING PRE OPIN4+ FWD REV – OPIN4– MICROCOMPUTER INTERFACE AGCI 50 C2D3 LDCONT COMPARATOR 49 C2D2 POWER CD-TEXT DECODER OPOUT4 SAVE 48 C2D1...
  • Page 39 CDX-M3DI/M1000TF IC400 TDA7416 30 29 24 23 HIGH PASS MIXER FILTER2 SOFT STEP FADER ACOUTR SOFT STEP ACINSW FADER ACOUTSW HIGH PASS MIXER 22 OUTRF FILTER WOOFER SOFT STEP OUTRR FILTER FADER 7 BAND EQUALIXER 20 AC2INR HIGH 19 AC2OUTR...
  • Page 40 CDX-M3DI/M1000TF IC404 LA2901V-TLM-E SIGNAL LFIN- LFOUT LFIN+ VREF SIGNAL LRIN- LROUT LRIN+ LGND VREF LIFT LIFT LIFT LOUT VREF VCCL VCCR VREF LIFT ROUT LIFT LIFT ROUT VREF RGND RFIN+ RFOUT SIGNAL RFIN- VREF RRIN+ RROUT RRIN- SIGNAL IC401 MM1175XFF...
  • Page 41 CDX-M3DI/M1000TF IC602 LB1930M-TLM-E BUFFER OUT1 MOTOR CONTROL DRIVE CIRCUIT CIRCUIT OUT2 BUFFER SGND PGND IC101 TL1451ACDB IC102 TL1451ACDB VERF. +2.5V – REFERENCE VOLTAGE ERROR COMPA- AMP2 RATOR2 +2.5V VERF OUTPUT2 SHORT CIRCUIT VERF VERF PROTECTION COMPARATOR OUTPUT1 – LATCH U.V.L.O...

  • Page 42: Exploded Views

    CDX-M3DI/M1000TF SECTION 5 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Color Indication of Appearance Parts The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. Example : 0 are critical for safety.

  • Page 43: Cam Section

    CDX-M3DI/M1000TF 5-2. CAM SECTION M601 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3340-310-A SWITCH BOARD, COMPLETE 3-236-947-01 GEAR (CAM L) 3-376-464-11 SCREW (+PTT 2.6X6), GROUND POINT X-3381-360-2 BRACKET (MAIN R) ASSY X-3381-368-1 BRACKET (SUB L) (RIVETING) ASSY X-3381-600-1 ARM (D.R) ASSY...

  • Page 44: Main Board Section

    CDX-M3DI/M1000TF 5-3. MAIN BOARD SECTION F901 FAN691 not supplied supplied TUX501 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-688-395-11 FLEXIBLE BOARD * 110 3-019-565-01 BRACKET (IC) A-3337-599-A DIGITAL BOARD, COMPLETE 1-827-121-11 CORD, CONNECTION (AUDIO OUT FRONT/REAR)

  • Page 45: Front Panel Section

    CDX-M3DI/M1000TF 5-4. FRONT PANEL SECTION LCD201 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3337-605-A PANEL (FRONT) ASSY (M3DI) 3-241-845-11 BUTTON (MODE) A-3337-616-A PANEL (FRONT) ASSY (M1000TF) 3-241-844-11 BUTTON (OFF) X-3383-785-1 LEVER (AMS.SVX) ASSY 3-241-843-01 LEVER (VOL)

  • Page 46: Cd Mechanism Section (1)

    CDX-M3DI/M1000TF 5-5. CD MECHANISM SECTION (1) (MG-393MC-121) M903 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3274-253-A DISC IN SW BOARD, COMPLETE 3-221-779-02 BRACKET (MOTOR) 3-040-039-03 CHASSIS (T) 3-040-034-01 SPRING (RA), TENSION 3-040-038-01 SPRING (LR), TENSION...

  • Page 47: Cd Mechanism Section (2)

    CDX-M3DI/M1000TF 5-6. CD MECHANISM SECTION (2) (MG-393MC-121) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-040-025-02 ARM, CHUCKING 3-040-033-01 SPRING (KF1), TENSION 3-040-031-01 DAMPER (T) A-3307-422-A CHASSIS (M) COMPLETE ASSY 3-040-056-01 LEVER (D) 3-040-059-01 SPRING (TR), TENSION...

  • Page 48: Cd Mechanism Section (3)

    CDX-M3DI/M1000TF 5-7. CD MECHANISM SECTION (3) (MG-393MC-121) not supplied M902 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piéce...

  • Page 49: Electrical Parts List

    CDX-M3DI/M1000TF SECTION 6 DIGITAL DISC IN SW ELECTRICAL PARTS LIST DISPLAY NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by mark 0 or dotted line with mark the parts list may be different from the they are seldom required for routine service.
  • Page 50 CDX-M3DI/M1000TF DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D214 6-500-219-01 DIODE 1SS404(TPH3) R213 1-218-951-11 RES-CHIP 1/16W D215 8-719-404-50 DIODE MA111-TX R214 1-218-951-11 RES-CHIP 1/16W D216 8-719-422-29 DIODE MA8047-L-TX R216 1-218-977-11 RES-CHIP 100K 1/16W D217...
  • Page 51 CDX-M3DI/M1000TF DISPLAY LIMIT SW LOAD SW MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < VARIABLE RESISTOR > C108 1-115-156-11 CERAMIC CHIP C109 1-107-826-11 CERAMIC CHIP 0.1uF RV402 1-238-090-11 RES, ADJ, CERMET 10K C110 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 52 CDX-M3DI/M1000TF MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C210 1-162-924-11 CERAMIC CHIP 56PF C348 1-162-927-11 CERAMIC CHIP 100PF (M1000TF) C349 1-162-927-11 CERAMIC CHIP 100PF C211 1-125-838-11 CERAMIC CHIP 2.2uF 6.3V C350 1-162-927-11 CERAMIC CHIP...
  • Page 53 CDX-M3DI/M1000TF MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C604 1-164-156-11 CERAMIC CHIP 0.1uF D402 8-719-069-55 DIODE UDZS-TE17-5.6B C605 1-164-156-11 CERAMIC CHIP 0.1uF D403 8-719-017-94 DIODE MA8180 C606 1-124-589-11 ELECT 47uF D404 8-719-069-56 DIODE UDZS-TE17-6.2B...
  • Page 54 CDX-M3DI/M1000TF MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JUMPER RESISTOR > Q404 8-729-019-00 TRANSISTOR 2SD2394-G Q405 8-729-900-53 TRANSISTOR DTC114EK JR100 1-216-864-11 METAL CHIP 1/10W Q406 8-729-900-53 TRANSISTOR DTC114EK JR102 1-216-864-11 METAL CHIP 1/10W...
  • Page 55 CDX-M3DI/M1000TF MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R134 1-216-809-11 METAL CHIP 1/10W R322 1-216-809-11 METAL CHIP 1/10W R135 1-216-829-11 METAL CHIP 4.7K 1/10W R323 1-216-809-11 METAL CHIP 1/10W R136 1-216-829-11 METAL CHIP 4.7K...
  • Page 56 CDX-M3DI/M1000TF MAIN SERVO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R504 1-216-845-11 METAL CHIP 100K 1/10W R619 1-216-853-11 METAL CHIP 470K 1/10W R505 1-216-809-11 METAL CHIP 1/10W R620 1-216-845-11 METAL CHIP 100K 1/10W R506 1-216-864-11 METAL CHIP...
  • Page 57 CDX-M3DI/M1000TF SERVO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-107-826-11 CERAMIC CHIP 0.1uF < CONNECTOR > 1-162-924-11 CERAMIC CHIP 56PF 1-162-924-11 CERAMIC CHIP 56PF 1-815-352-11 CONNECTOR, BOARD TO BOARD 30P 1-162-909-11 CERAMIC CHIP 0.25PF 50V...
  • Page 58 CDX-M3DI/M1000TF SERVO SWITCH Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-845-11 METAL CHIP 100K 1/10W R124 1-216-837-11 METAL CHIP 1/10W 1-216-845-11 METAL CHIP 100K 1/10W R126 1-216-845-11 METAL CHIP 100K 1/10W 1-216-845-11 METAL CHIP 100K...
  • Page 59 CDX-M3DI/M1000TF Ref. No. Part No. Description Remark ACCESSORIES ************ 1-469-778-11 CLAMP, FERRITE (RFC-5) (for POWER CORD) 1-477-261-11 REMOTE COMMANDER (RM-X131) (M3DI) 1-477-261-21 REMOTE COMMANDER (RM-X132) (M1000TF) 3-230-549-01 LID, BATTERY CASE (for RM-X131/X132) 3-251-038-11 MANUAL, INSTRUCTION, INSTALL (ENGLISH, FRENCH,SPANISH) (M3DI) 3-251-038-21 MANUAL, INSTRUCTION, INSTALL (ENGLISH,...
  • Page 60 CDX-M3DI/M1000TF REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision...

This manual is also suitable for:

Cdx-m1000tf

Table of Contents