Page 1 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Use this Help Guide when you have any questions on how to use the receiver. In this Help Guide, STR-DN1050 is used for illustration purposes unless when otherwise indicated. The picture above is of the STR-DN1050. Preparation...
Page 2 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Preparation Before using Installing and connecting speakers Connecting audio-visual devices and the antennas (aerials) Connecting to the network Turning on the receiver/preparing the remote control Initial setup of the receiver Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 3: Table Of Contents
Connecting a TV (for STR-DN850) ................... Connecting devices with HDMI jacks ................Connecting devices with jacks other than HDMI jacks (for STR-DN1050) ....... Connecting devices with jacks other than HDMI jacks (for STR-DN850) ......Connecting an iPhone, iPod, or USB device ..............
Page 4 Enjoying video/sound from the connected device ............Playing content from an iPhone/iPod ..................Compatible iPhone/iPod/iPad models ................Notes on iPhone/iPod ..................... Enjoying audio content stored on an iPhone/iPod via the USB port ....... Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network (AirPlay) ......................
Page 5 ......................Enjoying audio content stored on a BLUETOOTH device ..........Controlling a BLUETOOTH device using the remote control .......... Using the Multi-Zone Features (for STR-DN1050 only) ..............Enjoying sound in two rooms (multi-zone feature using the receiver with 2 TOC-3...
Page 6 (for STR-DN1050 only) ................Connecting another amplifier in zone 2 (for STR-DN1050 only) ........Setting the volume control for zone 2 (Lineout) (for STR-DN1050 only) ......Setting the zone 2 HDMI output (Zone2 Out) (for STR-DN1050 only) ......
Page 7 Setting the HDMI audio signal output of connected devices (Audio Out) ....... Setting the level of the subwoofer (Subwoofer Level) ............ Setting the zone 2 HDMI output (Zone2 Out) (for STR-DN1050 only) ......Setting the priority for the main zone (Priority) (for STR-DN1050 only) ......
Page 8 Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX) ......Zone Settings (for STR-DN1050 only) ..................Turning on/off the power for zone 2 (Power) (for STR-DN1050 only) ......Selecting the source signals for zone 2 (Input) (for STR-DN1050 only) ......Adjusting the volume for zone 2 (Volume) (for STR-DN1050 only) ........
Page 9 Remote control ....................... Announcements ..........................Specifications ......................... Specifications ........................Supplied accessories ......................Trademarks ..........................Trademarks ........................Software License Information ....................Software License Information ..................Troubleshooting ..........................Error messages ........................PROTECTOR ......................... USB FAIL ........................List of messages after Auto Calibration measurements ..........
Page 10 Tuner ............................The FM reception is poor....................The FM stereo reception is poor..................You cannot tune to radio stations................... RDS does not work (for European and Australian models only)........The RDS information that you want does not appear (for European and Australian models only).
Page 11 Controller devices or applications on the home network cannot connect to the receiver........................The receiver cannot be turned on by devices on a network........... AirPlay ............................ The receiver cannot be found from an iPhone/iPad/iPod or iTunes....... The sound skips......................
Page 12 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying Video and Sound Basic operations Playing content from an iPhone/iPod Playing content from a USB device Listening to the radio Enjoying sound effects Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 13 Controlling the receiver using a smartphone or tablet device (TV SideView) Controlling the receiver using a smartphone or tablet device (SongPal) Setting whether to control this receiver from a device on the home network Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 14 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Using BLUETOOTH Features Enjoying audio content stored on a BLUETOOTH device Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 15 STR-DN1050/STR-DN850 Using the Multi-Zone Features (for STR-DN1050 only) Enjoying sound in two rooms (multi-zone feature using the receiver with 2 pairs of speakers) (for STR-DN1050 only) Enjoying sound in two rooms (multi-zone feature using the receiver and another amplifier) (for STR-DN1050...
Page 16 Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) Configuring video and sound settings Saving and recalling various settings for the receiver (Custom Preset) Configuring speaker settings Using the sleep timer Checking information on the receiver Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 17 Speaker Settings Audio Settings HDMI Settings Input Settings Network Settings Bluetooth Settings Zone Settings (for STR-DN1050 only) System Settings Using the menu on the display panel Reverting to the factory default settings Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 18 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Parts and Controls Receiver Remote control Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 19 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Announcements Specifications Trademarks Software License Information Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 20 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Troubleshooting Error messages Power Image Sound Tuner iPhone/iPod USB devices Network connection Home network AirPlay Music Services BLUETOOTH device “BRAVIA” Sync (Control for HDMI) Remote control...
Page 21 If the problem is not solved Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 22: Before Use
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Notes on use June 2013 Before use To make full use of this content, please read the following notes thoroughly. Please note that they are subject to change without prior notice. Recommended system environment The following system environments are recommended for displaying this content.
Page 23 This content uses cookies. To use services incorporating cookies, you need to set your browser to allow cookies. Handling of personal information obtained from websites Sony may use cookies, web beacons or similar technologies to make statistical analysis of customers’ usage of this content while preserving anonymity.
Page 24: Before Using
Procedure to start using the receiver Supplied accessories Function for conversion of video signals Digital audio formats supported by the receiver Notes on connecting cables Using HDMI connections Using MHL (Mobile High-Definition Link) connections Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 25: Installing And Connecting Speakers
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Installing and connecting speakers Installing speakers Connecting speakers Connecting the speakers in zone 2 (for STR-DN1050 only) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 26: Connecting Audio-Visual Devices And The Antennas (Aerials)
Connecting a TV (for STR-DN1050) Connecting a TV (for STR-DN850) Connecting devices with HDMI jacks Connecting devices with jacks other than HDMI jacks (for STR-DN1050) Connecting devices with jacks other than HDMI jacks (for STR-DN850) Connecting an iPhone, iPod, or USB device...
Page 27: Connecting To The Network
Connecting to the network Connecting the receiver to the network using a LAN cable (for wired LAN connections only) Connecting the receiver to the network using the wireless LAN antenna (for wireless LAN connections only) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 28: Turning On The Receiver/Preparing The Remote Control
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Turning on the receiver/preparing the remote control Setting the voltage selector Inserting batteries into the remote control Turning on the receiver Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 29: Initial Setup Of The Receiver
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Initial setup of the receiver Setting up the receiver using the Easy Setup Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 30: Basic Operations
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Basic operations Using the menu on the TV screen Enjoying video/sound from the connected device Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 31: Playing Content From An Iphone/Ipod
Notes on iPhone/iPod Enjoying audio content stored on an iPhone/iPod via the USB port Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network (AirPlay) Enjoying audio content stored on a BLUETOOTH device Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 32: Playing Content From A Usb Device
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Playing content from a USB device Compatible USB devices and USB specifications Notes on USB devices Enjoying audio content stored on a USB device Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 33: Listening To The Radio
Presetting FM/AM radio stations (Preset Memory) Tuning to a station directly (Direct Tuning) Changing the AM tuning scale (for USA, Canadian, and Mexican models only) Receiving RDS broadcasts (for European and Australian models only) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 34: Enjoying Sound Effects
Resetting sound fields to the default settings Adjusting the equalizer (Equalizer) Enjoying clear and dynamic sound at a low volume (Sound Optimizer) Selecting the Auto Calibration type (Calibration Type) Enjoying high-fidelity sound (Pure Direct) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 35: About Network Features
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 About network features Overview of network features Network features message list Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 36: Setting Up A Wired Lan Connection (For Wired Lan Connections Only)
Setting up a wired LAN connection (for wired LAN connections only) System requirements for a wired LAN connection Connecting the receiver to the network using a LAN cable (for wired LAN connections only) Setting up a wired LAN connection Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 37: Setting Up A Wireless Lan Connection (For Wireless Lan Connections Only)
Method 3: Setting up a network connection by selecting an access point (Access Point Scan method) Method 4: Setting up a network connection by adding a new access point (manual setup method) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 38: Enjoying Audio Content Stored On A Server On The Home Network (Dlna)
Enjoying audio content stored on a server on the home network (DLNA) Deleting a server from the server list Setting whether to control this receiver from a device on the home network (DLNA Control Permission) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 39: Enjoying Audio Content From Itunes Or An Iphone/Ipad/Ipod Via The Network (Airplay)
MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network (AirPlay) Compatible iPhone/iPod/iPad models Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network (AirPlay) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 40: Enjoying Internet Music Services
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying internet music services Enjoying music services offered on the Internet Registering a new music service Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 41: Controlling The Receiver Using A Smartphone Or Tablet Device (Tv Sideview)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Controlling the receiver using a smartphone or tablet device (TV SideView) Registering a TV SideView device to the receiver Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 42: Controlling The Receiver Using A Smartphone Or Tablet Device (Songpal)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Controlling the receiver using a smartphone or tablet device (SongPal) Controlling the receiver using a smartphone or tablet device (SongPal) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 43: Setting Whether To Control This Receiver From A Device On The Home Network
Setting whether to control this receiver from a device on the home network Setting control permissions to all devices on the home network (DLNA Control Permission) Setting whether to control this receiver from a device on the home network (DLNA Control Permission) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 44: Enjoying Audio Content Stored On A Bluetooth Device
Turning the BLUETOOTH function on/off (Bluetooth Power) Enjoying audio content stored on a BLUETOOTH device with a one-touch connection (NFC) Enjoying audio content stored on a BLUETOOTH device Controlling a BLUETOOTH device using the remote control Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 45: Enjoying Sound In Two Rooms (Multi-Zone Feature Using The Receiver With 2 Pairs Of Speakers) (For Str-Dn1050Only)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying sound in two rooms (multi-zone feature using the receiver with 2 pairs of speakers) (for STR-DN1050 only) Connecting the speakers in zone 2 (for STR-DN1050 only) Setting the speakers for zone 2 (for STR-DN1050 only)
Page 46: Enjoying Sound In Two Rooms (Multi-Zone Feature Using The Receiver And Another Amplifier) (For Str-Dn1050 Only)
MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying sound in two rooms (multi-zone feature using the receiver and another amplifier) (for STR-DN1050 only) Connecting another amplifier in zone 2 (for STR-DN1050 only) Setting the volume control for zone 2 (Lineout) (for STR-DN1050 only)
Page 47: Interlocking With Bravia Tv And Other Devices ("Bravia" Sync)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) What is “BRAVIA” Sync? Preparing for “BRAVIA” Sync Interlocking other devices using an HDMI connection (“BRAVIA” Sync) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 48: Configuring Video And Sound Settings
Configuring video and sound settings Enjoying sound of TV broadcasts from the receiver Switching the monitors that output the HDMI video signals (for STR-DN1050 only) Switching between digital and analog audio (Input Mode) Using other video/audio input jacks (Input Assign)
Page 49: Saving And Recalling Various Settings For The Receiver (Custom Preset)
Saving and recalling various settings for the receiver (Custom Preset) About Custom Preset Recalling the settings saved to the scene Saving the settings to a preset Items for which you can save settings and the default values for each item Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 50: Configuring Speaker Settings
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Configuring speaker settings Adjusting the sound balance automatically (Auto Calibration) Using bi-amplifier connections Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 51: Using The Sleep Timer
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Using the sleep timer Using the sleep timer Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 52: Checking Information On The Receiver
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Checking information on the receiver Viewing information on the display panel Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 53: Easy Setup
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Easy Setup Setting up the receiver using the Easy Setup Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 54: Speaker Settings
Setting the crossover frequency of the speakers (Crossover Frequency) Outputting a test tone from each speaker (Test Tone) Lifting up the sound of the center speaker (Center Speaker Lift Up) Selecting the unit of measurement (Distance Unit) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 55: Audio Settings
Setting the low-pass filter for the subwoofer output (Subwoofer Low Pass Filter) Synchronizing audio with video output (A/V Sync) Adjusting the volume automatically (Advanced Auto Volume) Selecting the language of digital broadcasts (Dual Mono) Compressing the dynamic range (Dynamic Range Compressor) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 56: Hdmi Settings
Setting the HDMI audio signal output of connected devices (Audio Out) Setting the level of the subwoofer (Subwoofer Level) Setting the zone 2 HDMI output (Zone2 Out) (for STR-DN1050 only) Setting the priority for the main zone (Priority) (for STR-DN1050 only)
Page 57: Input Settings
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Input Settings Changing the assignment and display for the input jacks Changing the name for each input (Name) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 58: Checking The Network Information (Information)
Setting control permissions to all devices on the home network (DLNA Control Permission) Setting whether to control this receiver from a device on the home network (DLNA Control Permission) Checking registered TV SideView devices (TV SideView Setup) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 59: Bluetooth Settings
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Bluetooth Settings Turning the BLUETOOTH function on/off (Bluetooth Power) Bluetooth Pairing Setting the Bluetooth Standby mode (Bluetooth Standby) Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 60: Zone Settings (For Str-Dn1050 Only)
MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Zone Settings (for STR-DN1050 only) Turning on/off the power for zone 2 (Power) (for STR-DN1050 only) Selecting the source signals for zone 2 (Input) (for STR-DN1050 only) Adjusting the volume for zone 2 (Volume) (for STR-DN1050 only)
Page 61: System Settings
Tuning on/off the display for the volume level or sound field (Auto Display) Setting standby mode (Auto Standby) Receiving information on newer software (Software Update Notification) Checking the software version (Software Version) Updating the software (Network Update) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 62: Using The Menu On The Display Panel
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Using the menu on the display panel Operating the receiver with the menu on the display panel Viewing information on the display panel Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 63: Reverting To The Factory Default Settings
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Reverting to the factory default settings Reverting to the factory default settings Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 64: Receiver
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Receiver Front panel (STR-DN1050) Front panel (STR-DN850) Rear panel (STR-DN1050) Rear panel (STR-DN850) Indicators on the display panel Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 65: Remote Control
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Remote control Remote control Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 66: Specifications
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Specifications Specifications Supplied accessories Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 67: Trademarks
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Trademarks Trademarks Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 68: Software License Information
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Software License Information Software License Information Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 69: Error Messages
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Error messages PROTECTOR USB FAIL List of messages after Auto Calibration measurements iPhone/iPod message list USB message list Network features message list Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 70: Power
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Power The receiver is turned off automatically. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 71: Image
No 4K image appears on the TV. No image is output from the TV when the receiver is in standby mode. The GUI menu does not appear on the TV screen. The display panel is turned off. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 72: Sound
A test tone is not output from the speakers. A test tone is output from a different speaker than the speaker displayed on the TV screen. No sound is output from the TV when the receiver is in standby mode. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 73: Tuner
The FM stereo reception is poor. You cannot tune to radio stations. RDS does not work (for European and Australian models only). The RDS information that you want does not appear (for European and Australian models only). Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 74: Iphone/Ipod
STR-DN1050/STR-DN850 iPhone/iPod The sound is distorted. There is no sound from an iPhone/iPod. An iPhone/iPod cannot be charged. An iPhone/iPod cannot be operated. The ringtone volume of an iPhone does not change. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 75: Usb Devices
A USB device cannot be connected to the USB port. Erroneous display. [Reading] is displayed for an extended time, or it takes a long time before playback starts. An audio file cannot be played. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 76: Network Connection
Cannot connect to the network using WPS via a wireless LAN connection. An error message appears. Cannot connect to the network. Cannot control the receiver using a TV SideView device. Cannot select the Network Settings menu. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 77: Controller Devices Or Applications On The Home Network Cannot Connect To The Receiver
Cannot play copyrighted files. Cannot select a previously selected track. Controller devices or applications on the home network cannot connect to the receiver. The receiver cannot be turned on by devices on a network. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 78: Airplay
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 AirPlay The receiver cannot be found from an iPhone/iPad/iPod or iTunes. The sound skips. The receiver cannot be operated. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 79: Music Services
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Music Services Cannot connect the receiver to a service. The sound skips. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 80: Bluetooth Device
Pairing cannot be done. Cannot make a BLUETOOTH connection. The sound skips or fluctuates, or the connection is lost. The sound of your BLUETOOTH device cannot be heard on the receiver. Severe humming or noise. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 81: Bravia" Sync (Control For Hdmi)
“BRAVIA” Sync (Control for HDMI) The Control for HDMI function does not work. The Audio Return Channel (ARC) function does not work. An MHL-compatible source device cannot be charged. No image from an MHL-compatible source device. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 82: Remote Control
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Remote control The remote control does not function. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 83: If The Problem Is Not Solved
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 If the problem is not solved Reverting to the factory default settings Resetting sound fields to the default settings Customer support websites Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 84 Connecting a TV (for STR-DN1050)/Connecting a TV (for STR-DN850) Connecting devices with HDMI jacks Connecting devices with jacks other than HDMI jacks (for STR-DN1050)/Connecting devices with jacks other than HDMI jacks (for STR-DN850) 6. Connecting the receiver to the network...
Page 85 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Supplied accessories Startup Guide (1) Reference Guide (1) Remote control (1) R03 (size AAA) batteries (2) FM wire antenna (aerial) (1) AM loop antenna (aerial) (1) Optimizer microphone (1) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 86 The correspondence of the INPUT jacks to the OUTPUT jacks is shown below. HDMI IN: HDMI OUT COMPONENT VIDEO IN (for STR-DN1050 only): HDMI OUT (*1), COMPONENT VIDEO MONITOR OUT (*2) VIDEO IN: HDMI OUT (*1), MONITOR OUT (*2) For STR-DN1050 only. Video signals are upconverted when output (up to 4K).
Page 87 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Digital audio formats supported by the receiver The digital audio formats that this receiver can decode depend on the digital audio output jacks of the connected device. This receiver supports the following audio formats. The words in brackets are those indicated on the display panel.
Page 88 These formats are compatible with MHL when you connect a MHL-compatible source device to the HDMI/MHL (VIDEO 2 IN) (for STR-DN1050 only), HDMI VIDEO 1 IN (MHL) (for STR-DN1050 only) or HDMI VIDEO IN (MHL) (for STR-DN850 only) jack. Notes on use...
Page 89 All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. If you want to connect several digital devices, but cannot find an unused input “Using other video/audio input jacks (Input Assign).” Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 90 Analog video signals input to the receiver’s VIDEO jack or COMPONENT VIDEO jacks can be output as HDMI signals (for STR-DN1050 only). Audio signals are not output from the HDMI OUT jack(s) while the image is being converted. This receiver supports High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), Deep Color (Deep Colour), “x.v.Color (x.v.Colour),”...
Page 91 (MHL) (*1) or HDMI VIDEO IN (MHL) (*2) jacks of the receiver while the receiver is turned on, or while the receiver is turned off when [Pass Through] is set to [On] (*3) or [Auto], or [Network Standby] (*4) is set to [On]. For STR-DN1050 only For STR-DN850 only...
Page 92 Note You cannot use the surround back speakers and the front high speakers simultaneously. Related Topic Connecting speakers Connecting the speakers in zone 2 (for STR-DN1050 only) Connecting another amplifier in zone 2 (for STR-DN1050 only) Notes on use 4-488-938-11(1)
Page 93 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting speakers Connect each speaker as illustrated below. Be sure to disconnect the AC power cord (mains lead) before connecting cables. For details on how to connect speaker cables to the receiver, see “How to connect speaker...
Page 94 Notes on connecting cables Using bi-amplifier connections Connecting the speakers in zone 2 (for STR-DN1050 only) Connecting another amplifier in zone 2 (for STR-DN1050 only) Selecting the speaker pattern and setting the assignment for the speaker terminals (Speaker Connection/SB Speaker...
Page 95 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting the speakers in zone 2 (for STR-DN1050 only) You can enjoy sound from a device connected to the receiver in a zone other than the main zone. For example, you can watch a DVD in the main zone and listen to a CD in zone 2.
Page 96: Connecting A Tv (For Str-Dn1050)
Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI connection HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV incompatible with the Audio Return Channel (ARC) function via an HDMI connection...
Page 97 Audio cable (not supplied) HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV without HDMI jacks The solid lines show recommended connections and the dashed lines show alternative connections.
Page 98 Component video cable (not supplied) Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI OUT or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted.
Page 99 Controlling HDMI devices (Control for HDMI) Passing HDMI signals through (Pass Through) Setting the HDMI audio signal output of connected devices (Audio Out) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 100: Connecting A Tv (For Str-Dn850)
Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI connection HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV incompatible with the Audio Return Channel (ARC) function via an HDMI connection...
Page 101 Audio cable (not supplied) HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV without HDMI jacks The solid lines show recommended connections and the dashed lines show alternative connections.
Page 102 Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI TV OUT or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted.
Page 103 DN1050)” or “Connecting devices with jacks other than HDMI jacks (for STR-DN850).” HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable. Satellite tuner, cable TV tuner PlayStation3 DVD recorder Super Audio CD player, CD player...
Page 104 The image quality depends on the connecting jack. We recommend that you connect your devices via an HDMI connection if they have HDMI jacks. Related Topic Notes on connecting cables Using HDMI connections Changing the name for each input (Name) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 105: Connecting Devices With Jacks Other Than Hdmi Jacks (For Str-Dn1050)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting devices with jacks other than HDMI jacks (for STR-DN1050) Connect devices to the receiver as illustrated below. The solid lines show recommended connections and the dashed lines show alternative connections. Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Page 106 The image quality depends on the connecting jack. We recommend that you connect your devices via an HDMI connection if they have HDMI jacks. Related Topic Notes on connecting cables Changing the name for each input (Name) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 107: Connecting Devices With Jacks Other Than Hdmi Jacks (For Str-Dn850)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting devices with jacks other than HDMI jacks (for STR-DN850) Connect devices to the receiver as illustrated below. The solid lines show recommended connections and the dashed lines show alternative connections. Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Page 108 The image quality depends on the connecting jack. We recommend that you connect your devices via an HDMI connection if they have HDMI jacks. Related Topic Notes on connecting cables Changing the name for each input (Name) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 109 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting an iPhone, iPod, or USB device Connect an iPhone, iPod or USB device as illustrated below. USB cable (not supplied) iPhone, iPod, or USB device Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 110 Front (for STR-DN1050 only) Rear Mobile device MHL cable (not supplied) Use an MHL 2-compliant cable. Sony recommends that you use an MHL cable made by Sony. MHL Direct Attach Device Related Topic Using MHL (Mobile High-Definition Link) connections Notes on use...
Page 111 To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other devices. Be sure to fully extend the FM wire antenna (aerial). After connecting the FM wire antenna (aerial), keep it as horizontal as possible. Related Topic Notes on connecting cables Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 112 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Connecting another amplifier in zone 2 (for STR-DN1050 only) You can enjoy image (*) and sound from a device connected to the receiver in a zone other than the main zone. For example, you can watch a DVD in the main zone and listen to a CD in zone 2.
Page 113 Speakers Amplifier/receiver made by Sony HDMI cable (not supplied) Note To use this connection, set [Zone2 Out] in the HDMI Settings menu to [On]. Related Topic Notes on connecting cables Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 114 We recommend that you connect the server to the router with a wired connection. Server LAN cable (not supplied) Router Modem Internet Related Topic Notes on connecting cables System requirements for a wired LAN connection Setting up a wired LAN connection Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 115 Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. Related Topic System requirements for a wireless LAN connection Selecting a wireless LAN connection method Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 116 If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord (mains lead) to a wall outlet. The voltage selector may differ depending on the area. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 117 If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. When the receiver no longer responds to the remote control, replace both of the batteries with new ones. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 118 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Turning on the receiver When you have made all connections with the other devices, connect the AC power cord (mains lead), then turn on the receiver. 1. Connect the AC power cord (mains lead) to a wall outlet.
Page 119 If the Easy Setup screen does not appear or you want to display the Easy Setup screen manually, you can display it by selecting [Settings] - [Easy Setup] from the home menu. Related Topic Adjusting the sound balance automatically (Auto Calibration) Setting up a wired LAN connection Selecting a wireless LAN connection method Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 120 When [OPTIONS] appears in the lower right portion of the TV screen, you can display the function list by pressing OPTIONS and selecting a related function. To return to the previous screen, press RETURN. To exit the menu, press HOME to display the home menu, then press HOME again. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 121 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying video/sound from the connected device 1. Switch the input of the TV to the input to which the receiver is connected. 2. Press HOME. The home menu is displayed on the TV screen.
Page 122 To turn the volume up or down quickly Turn the knob quickly. Press and hold one of the buttons. To make fine adjustments Turn the knob slowly. Press one of the buttons and release it immediately. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 123 (4th and 5th generation) When using AirPlay iPhone: iPhone 5s/iPhone 5c/iPhone 5/iPhone 4s/iPhone 4/iPhone 3GS iPad: iPad (4th generation)/iPad mini/iPad (3rd generation)/iPad 2 iPod touch: iPod touch (3rd thorough 5th generation) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 124 STR-DN1050/STR-DN850 Notes on iPhone/iPod Sony cannot accept responsibility in the event that data recorded to an iPhone/iPod is lost or damaged when using an iPhone/iPod connected to this receiver. iPhone/iPod is charged when connected to the receiver while the receiver is turned on.
Page 125 Please wait as the function will recover after a short period of time. Related Topic Connecting an iPhone, iPod, or USB device Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 126 1. Tap/click icon on the iPhone/iPad/iPod screen or iTunes window. 2. Select [STR-DN1050] or [STR-DN850] on the AirPlay menu of iTunes or your iPhone/iPad/iPod. 3. Start playing back audio content on an iPhone/iPad/iPod or in iTunes. Controlling AirPlay playback You can use the +/–,...
Page 127 Compatible iPhone/iPod/iPad models Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 128: Enjoying Audio Content Stored On A Bluetooth Device
This receiver is displayed as [STR-DN1050] or [STR-DN850] . 5. Select [STR-DN1050] or [STR-DN850] on the BLUETOOTH device display. If [STR-DN1050] or [STR-DN850] is not displayed, repeat this process from step 1. 6. Check that the connection is completed and [BT] lights up on the display panel.
Page 129 Related Topic Controlling a BLUETOOTH device using the remote control Checking the information of a connected BLUETOOTH device Setting the Bluetooth Standby mode (Bluetooth Standby) Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 130 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Compatible USB devices and USB specifications Verified Sony USB devices You can use the following Sony USB devices on this receiver: Walkman: NW-A857/A860 NW-E053/E060/E083 NW-F800 NW-M505 NW-S756/S760/S770/S785 NW-WH303 NW-Z1000/Z1070 NWD-W260/W273 NWZ-A864 NWZ-B162F/B172/B183 NWZ-E053/E363/E373/E385/E463/E575/E585...
Page 131: Usb Specifications
32 kHz – 192 kHz, 16/24 bit PCM ALAC: 32 kHz - 96 kHz, 16/24 bit ALAC DSD (for STR-DN1050 only): 2.8 MHz, 1 bit DSD Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. The receiver does not play files encoded with DRM.
Page 132 Compatible USB device Mass Storage Class, High-speed type Maximum current 500 mA Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 133 The playback order for the receiver may differ from the playback order of the connected USB device. If folders that have no audio files are selected, [No Track] appears. When playing a very long track, some operations may cause playback delay. Related Topic USB message list Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 134 Please wait as the function will recover after a short period of time. Related Topic Connecting an iPhone, iPod, or USB device Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 135 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, be sure you have connected the FM and AM antennas (aerials) to the receiver. 1. Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
Page 136 6. Repeat steps 1 to 5 to store another station. You can store stations as follows: AM band: AM 1 to AM 30 FM band: FM 1 to FM 30 Related Topic Naming preset stations (Name Input) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 137 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Tuning to a station directly (Direct Tuning) You can enter the frequency of a station directly. 1. Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu. 2. Press 3. Enter the frequency using i.
Page 138 The current AM tuning scale is changed to 9 kHz (or 10 kHz). To reset the scale to 10 kHz (or 9 kHz), repeat the procedure above. Note Depending on the settings, the receiver may take some time to change the AM tuning scale. All preset stations will be erased when you change the tuning scale. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 139 Some letters that can be displayed on the TV screen cannot be displayed on the display panel. Hint You can check the frequency while a Program Service name is displayed by pressing DISPLAY repeatedly. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 140: Selecting A Sound Field (Sound Field)
You can also select [Sound Field] in [Sound Effects] from the home menu. You can also use A.F.D./2CH, MOVIE or MUSIC on the remote control or the receiver to select a sound field. Related Topic Resetting sound fields to the default settings Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 141 1. Turn off the receiver. 2. Hold down MUSIC and press (on/standby) on the receiver. [S.F. CLEAR] appears on the display panel and all sound fields are reset to their default setting. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 142: Adjusting The Equalizer (Equalizer)
Depending on the audio format, the receiver may play signals at a lower sampling frequency than the original sampling frequency of the input signals. Hint You can also select [Equalizer] in [Sound Effects] from the home menu. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 143: Enjoying Clear And Dynamic Sound At A Low Volume (Sound Optimizer)
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. Hint You can also select [Sound Optimizer] in [Sound Effects] from the home menu. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 144 3. Select the setting you want. Full Flat: Makes the measurement of frequency from each speaker flat. Engineer: Sets to “the Sony listening room standard” frequency characteristics. Front Reference : Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
Page 145: Enjoying High-Fidelity Sound (Pure Direct)
You can also use the PURE DIRECT button on the receiver to turn the Pure Direct function on or off. You can also select [Pure Direct] in [Settings] - [Audio Settings] from the home menu. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 146 You can keep the receiver up-to-date with an internet connection. You can control the receiver from your mobile device. “TV SideView” is available on Google Play and App Store. “SongPal” is available on Google Play and App Store. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 147 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Network features message list Network settings Invalid XXX (*): The entered value is incorrect or invalid. XXX represents an SSID, IP Address, Security Key, Subnet Mask, Default Gateway, Primary DNS, or Secondary DNS.
Page 148 Not available: The selected service is not available. An operation that is currently unavailable has been attempted. Feature currently unavailable.: An operation that is currently prohibited has been attempted. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 149 A server is a device which delivers music content to a DLNA device on a home network. A device that can be used as a server (a computer, etc.) must be connected to your wireless or wired LAN home network. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 150: Setting Up A Wired Lan Connection
Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS], then select [Next]. Hint See [Information] when checking the network settings. Related Topic Connecting the receiver to the network using a LAN cable (for wired LAN connections only) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 151 A server is a device which delivers music content to a DLNA device on a home network. A device that can be used as a server (a computer, etc.) must be connected to your wireless or wired LAN home network. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 152 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Selecting a wireless LAN connection method You can select the most suitable network connection method for your network environment from four network connection methods. Confirm your network environment in advance. If your wireless LAN router/access point supports the WPS (Wi-Fi Protected...
Page 153 ] lights up on the display panel. Hint WPS (Wi-Fi Protected Setup) is a standard created by the Wi-Fi Alliance allowing you to set up a wireless network easily and securely. See [Information] when checking the network settings. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 154 See [Information] when checking the network settings. For details on entering the PIN code into the wireless LAN router/access point, refer to the operating instructions of your wireless LAN router/access point. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 155 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Method 3: Setting up a network connection by selecting an access point (Access Point Scan method) To set up the network using this connection method, you will be required to select or enter the following information.
Page 156 Note The security setting display in step 6 does not appear if your network has not been secured by encryption (using the security key). Hint See [Information] when checking the network settings. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 157 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Method 4: Setting up a network connection by adding a new access point (manual setup method) You can input the network name (SSID) you want manually if it does not appear on the list.
Page 158 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying audio content stored on a server on the home network (DLNA) You can play back audio content such as DSD, FLAC, WAV, AAC, MP3, etc., stored on a server on the home network using the receiver.
Page 159 A server does not appear in the server list. ([No server is available] appears on the TV screen.) Playback does not start, or does not automatically proceed to the next track or file. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 160 A server will appear in the server list even after being deleted from the list if the receiver finds it on the network (such as when you refresh the server list). Related Topic Enjoying audio content stored on a server on the home network (DLNA) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 161: Setting Whether To Control This Receiver From A Device On The Home Network (Dlna Control Permission)
Up to 20 devices can be set with either [Permit] or [Disable]. When 20 devices have been set, the newest device cannot be set. In this case, delete unnecessary devices from the list. Related Topic Deleting devices from the device list in DLNA Control Permission Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 162 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying music services offered on the Internet You can listen to music services offered on the Internet with this receiver. To use this function, the receiver must be connected to the Internet. Visit the website below for more information on the music services: http://www.sonyentertainmentnetwork.com...
Page 163 Hint The receiver displays the last selected service or station when the function is changed to the music services until the receiver is turned off. Related Topic Registering a new music service Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 164 Before disposing of the receiver, clear all memorized settings. For details, see “Reverting to the factory default settings.” If you use Music Unlimited, visit the website below and deregister the receiver. http://munlimited.com/home Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 165 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Registering a TV SideView device to the receiver You can control the receiver by touch-pad operation of a mobile device, tablet device, etc. with TV SideView installed. You need to register your mobile device to the receiver as a remote device (for the first time only).
Page 166 Connecting the receiver to the network using a LAN cable (for wired LAN connections only) Connecting the receiver to the network using the wireless LAN antenna (for wireless LAN connections only) Turning on the control mode for maintenance (External Control) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 167 1. Select [Settings] - [Network Settings] from the home menu. 2. Select [DLNA Control Permission]. 3. Select [Allow All Controllers]. 4. Select [On]. Related Topic Setting whether to control this receiver from a device on the home network (DLNA Control Permission) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 168 Even if the device supports the same profile, the functions may differ depending on the specifications of the BLUETOOTH device. The audio playback on this receiver may be delayed from that on the BLUETOOTH device because of the characteristics of the BLUETOOTH wireless technology. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 169 You can turn the BLUETOOTH function on or off. The NFC function is also turned on/off in conjunction with this setting. 1. Select [Settings] - [Bluetooth Settings] from the home menu. 2. Select [Bluetooth Power]. 3. Select [On] or [Off]. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 170 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Enjoying audio content stored on a BLUETOOTH device with a one-touch connection (NFC) You can enjoy audio content on a BLUETOOTH device with a one-touch connection using the NFC function. 1. Download the NFC Easy Connect application to your mobile device.
Page 171 Checking the information of a connected BLUETOOTH device Setting the Bluetooth Standby mode (Bluetooth Standby) Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 172 These operations may not be available for certain BLUETOOTH devices. The actual operations may also differ depending on the connected BLUETOOTH device. Related Topic Checking the information of a connected BLUETOOTH device Setting the Bluetooth Standby mode (Bluetooth Standby) Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 173 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting the speakers for zone 2 (for STR-DN1050 only) When the speakers in zone 2 are connected to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals of the receiver, configure the settings so that the sound selected in zone 2 is output from the speakers connected to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals.
Page 174 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Operating the receiver for zone 2 (for STR-DN1050 only) You can enjoy sound from the receiver in zone 2 by the following procedure. 1. Turn on the amplifier in zone 2. In the case of “Connecting the speakers in zone 2 (for STR-DN1050...
Page 175 AirPlay function is available in main zone only. Related Topic Turning on/off the power for zone 2 (Power) (for STR-DN1050 only) Selecting the source signals for zone 2 (Input) (for STR-DN1050 only) Adjusting the volume for zone 2 (Volume) (for STR-DN1050 only)
Page 176 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting the volume control for zone 2 (Lineout) (for STR-DN1050 only) You can set variable or fixed volume control for the ZONE 2 AUDIO OUT jacks. 1. Select [Settings] - [Zone Settings] from the home menu.
Page 177: Setting The Zone 2 Hdmi Output (Zone2 Out) (For Str-Dn1050 Only)
MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting the zone 2 HDMI output (Zone2 Out) (for STR-DN1050 only) When a device such as a TV or AV amplifier is connected to the HDMI ZONE 2 OUT jack, you can output HDMI signals from the device in zone 2.
Page 178: Setting The Priority For The Main Zone (Priority) (For Str-Dn1050 Only)
MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Setting the priority for the main zone (Priority) (for STR-DN1050 only) When the Zone2 Out function is enabled and you select the same HDMI input for both the main zone and zone 2, there may be some interference to the audio and video signals in the main zone. To avoid possible interference, you can place priority on the main zone for HDMI input selection.
Page 179 STR-DN1050/STR-DN850 What is “BRAVIA” Sync? The “BRAVIA” Sync function allows communication between Sony products such as TVs, Blu-ray Disc players, DVD players, and AV amplifiers that support the Control for HDMI function. Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI (High-Definition Multimedia Interface).
Page 180 7. Repeat steps 5 and 6 for other devices for which you want to use the Control for HDMI function. Note Perform the steps above again if you unplug the HDMI cable or change the connection. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 181 STR-DN1050/STR-DN850 Interlocking other devices using an HDMI connection (“BRAVIA” Sync) By connecting Sony devices that support the “BRAVIA” Sync using an HDMI cable (not supplied), operations are simplified as follows: Enjoying an input source from a connected device immediately (One-Touch Play)
Page 182 TV from the TV speaker and the speakers connected to the receiver. Related Topic Switching between digital and analog audio (Input Mode) Connecting a TV (for STR-DN1050) Connecting a TV (for STR-DN850) Notes on use...
Page 183 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Switching the monitors that output the HDMI video signals (for STR-DN1050 only) If you have connected two monitors to the HDMI OUT A and HDMI OUT B jacks, you can switch the output for these two monitors using the HDMI OUTPUT button on the remote control.
Page 184 When [2ch Analog Direct] is being used, audio input is set to [Analog]. You cannot select other modes. Hint You can also use INPUT SELECTOR on the receiver to select the input in step 1. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 185 STR-DN1050: BD/DVD, GAME, SAT/CATV, VIDEO 1, VIDEO 2, SA-CD/CD STR-DN850: BD/DVD, GAME, SAT/CATV, VIDEO, SA-CD/CD OPT 1: STR-DN1050: BD/DVD, GAME, SAT/CATV (*), VIDEO 1, VIDEO 2, SA-CD/CD STR-DN850: BD/DVD, GAME, SAT/CATV (*), VIDEO, SA-CD/CD COAX: STR-DN1050: BD/DVD (*), GAME, SAT/CATV, VIDEO 1, VIDEO 2, SA-CD/CD...
Page 186 STR-DN850: BD/DVD, GAME, SAT/CATV, VIDEO, SA-CD/CD (*) None: STR-DN1050: BD/DVD, GAME (*), SAT/CATV, VIDEO 1 (*), VIDEO 2 (*), SA-CD/CD (*) STR-DN850: BD/DVD (*), GAME (*), SAT/CATV, VIDEO (*), SA-CD/CD Default setting Note When you assign the digital audio input, the Input Mode setting may change automatically.
Page 187 For example, by saving the settings in the [1: Movie] preset as follows, you can switch the settings of the receiver all at one time without switching each setting for [Input], [Calibration Type], and [Sound Field] individually. Input: BD/DVD Sound Field: HD-D.C.S. Calibration Type: No Change Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 188 You can recall the setting(s) saved for [1: Movie], [2: Music] or [3: Party] directly by pressing CUSTOM PRESET 1, CUSTOM PRESET 2, or CUSTOM PRESET 3 on the remote control. Related Topic Items for which you can save settings and the default values for each item Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 189 When you select [3: Party], zone 2 is turned on automatically and you can simultaneously enjoy the same music as the main zone. Related Topic Items for which you can save settings and the default values for each item Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 190 1: Movie Input: BD/DVD Tuner Preset: No Change Volume: No Change HDMI OUT: No Change Party Mode (for STR-DN1050 only): No Change Sleep: No Change Sound Field: HD-D.C.S. Sound Optimizer: No Change Pure Direct: No Change Calibration Type: No Change...
Page 191 4: Night Input: No Change Tuner Preset: No Change Volume: 11 HDMI OUT: No Change Party Mode (for STR-DN1050 only): No Change Sleep: 30 min Sound Field: No Change Sound Optimizer: Normal Pure Direct: No Change Calibration Type: No Change...
Page 192 For details on performing this function, see the following topics: Before you perform Auto Calibration Connecting the optimizer microphone Selecting the front speakers Performing Auto Calibration Related Topic About Auto Calibration Confirming active subwoofer setup Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 193 You can only set [SB Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and front high speakers. Related Topic Notes on connecting cables Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 194 To check the remaining time before the receiver turns off, repeat steps 1 to 4. The remaining time appears on the display panel. The sleep timer will be canceled if you perform the following: Update the software of the receiver. Press (on/standby). Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 195 [PURE.DIRECT] appears on the display panel when the Pure Direct function is activated. Stream information may not be displayed. Note Characters or marks in some languages may not be displayed. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 196 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Performing Auto Calibration You can perform automatic calibration from where you are sitting. 1. Select [Settings] - [Speaker Settings] from the home menu. 2. Select [Auto Calibration]. 3. Follow the instructions on the TV screen, then press to select [Start].
Page 197 Before you perform Auto Calibration Checking Auto Calibration results Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 198 Headphones are connected. [Auto Calibration] has not been performed. The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 199: Selecting The Speaker Pattern And Setting The Assignment For The Speaker Terminals (Speaker Connection/Sbspeaker Assign)
1. Select [Settings] - [Speaker Settings] from the home menu. 2. Select [Speaker Connection]. 3. Select the speaker pattern you want. 4. Set [SB Speaker Assign] to any of the following settings (*). Zone2 (for STR-DN1050 only) When using the zone 2 connection. Bi-Amp When using the bi-amplifier connection.
Page 200: Adjusting The Speaker Level (Level/Distance/Size)
1. Select [Settings] - [Speaker Settings] from the home menu. 2. Select [Level/Distance/Size]. 3. Select the speaker on the screen for which you want to adjust the speaker level. 4. Select [Level] and then press to adjust the level. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 201: Adjusting The Speaker Distance (Level/Distance/Size)
4. Select [Distance] and then press to adjust the distance. Note Some parameters may not be available depending on the speaker pattern setting. Hint When headphones are connected, [Distance] cannot be set. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 202 When the front speakers are set to [Small], the center, surround, and surround back/front high speakers are also automatically set to [Small]. If you do not use the subwoofer, the front speakers are automatically set to [Large]. [Size] cannot be set when headphones are connected. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 203: Setting The Crossover Frequency Of The Speakers (Crossover Frequency)
Note This function does not work when headphones are connected. The surround back speakers will be set to the same setting as that of the surround speakers. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 204: Outputting A Test Tone From Each Speaker (Test Tone)
To adjust the level of all speakers at the same time, press +/–. You can also use MASTER VOLUME on the receiver. The adjusted value is shown on the TV screen during adjustment. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 205: Lifting Up The Sound Of The Center Speaker (Center Speaker Lift Up)
There is no center speaker. There are no front high speakers. The [2ch Stereo], [2ch Analog Direct], and [Multi Stereo] sound fields are being used. A sound field for music is being used. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 206: Selecting The Unit Of Measurement (Distance Unit)
1. Select [Settings] - [Speaker Settings] from the home menu. 2. Select [Distance Unit]. 3. Select the setting you want. meter: The distance is displayed in meters. feet: The distance is displayed in feet. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 207: Playing Audio Signals With High-Quality Sound (Digital Legato Linear (D.l L.))
STR-DN1050/STR-DN850 Playing audio signals with high-quality sound (Digital Legato Linear (D.L.L.)) The D.L.L. function is Sony proprietary technology that allows low-quality digital and analog audio signals to be played with high-quality sound. 1. Select [Settings] - [Audio Settings] from the home menu.
Page 208: Setting The Low-Pass Filter For The Subwoofer Output (Subwoofer Low Pass Filter)
On: Always activates the low-pass filter with a cutoff frequency of 120 Hz. Off: Does not activate the low-pass filter. Note This function does not work when [2ch Analog Direct] is being used. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 209: Synchronizing Audio With Video Output (A/V Sync)
0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals. Note The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 210: Adjusting The Volume Automatically (Advanced Auto Volume)
Be sure to reduce the volume level before you turn this function on or off. The Advanced Auto Volume function may not work, depending on the audio format. This function does not work when [2ch Analog Direct] is being used. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 211: Selecting The Language Of Digital Broadcasts (Dual Mono)
Sub: Sound in the sub language will be output. Main/Sub: Sound in the main language will be output through the front left speaker and sound in the sub language will be output through the front right speaker simultaneously. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 212: Compressing The Dynamic Range (Dynamic Range Compressor)
Auto: The dynamic range is compressed automatically when there is a flag in the sound source that recommends using the Dynamic Range Compressor function. On: The dynamic range is compressed as intended by the recording engineer. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 213: Up-Converting Video Signals To 4K (4K Scaling)
Auto: Enables video scaling control of 4K HDMI output automatically if you connect a 4K-compatible TV. Note This function works only when video signals from the VIDEO IN, COMPONENT VIDEO IN (for STR-DN1050 only), or HDMI IN jacks are being received. HDMI video input signals must be 1080p/24 Hz.
Page 214: Controlling Hdmi Devices (Control For Hdmi)
When the receiver is in standby mode, the (on/standby) indicator on the front panel lights up in amber if [Control for HDMI] is set to [On]. Related Topic Preparing for “BRAVIA” Sync Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 215: Passing Hdmi Signals Through (Pass Through)
Auto: The receiver outputs HDMI signals to the TV from the HDMI OUT jack when the TV is turned on while the receiver is in the standby mode. Sony recommends this setting if you are using a “BRAVIA” Sync-compatible Sony TV. This setting saves power in the standby mode compared to the [On] setting.
Page 216: Setting The Hdmi Audio Signal Output Of Connected Devices (Audio Out)
TV, even when playing back multi-channel source. When you connect the receiver to a video device (projector, etc.), sound may not be output from the receiver. In this case, select [AMP]. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 217: Setting The Level Of The Subwoofer (Subwoofer Level)
Auto: Automatically sets the level to 0 dB or +10 dB, depending on the audio stream. +10 dB 0 dB Note This setting is invalid when [FM TUNER], [AM TUNER], [USB], [Bluetooth], [Home Network], or [Music Services] is selected. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 218: Speeding Up The Display When Switching The Hdmi Input (Fast View)
1. Select [Settings] - [HDMI Settings] from the home menu. 2. Select [Fast View]. 3. Select the setting you want. Auto: You can select HDMI input faster than normal selection. Off: The Fast View function is not available. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 219: Automatically Switching The Input When An Mhl Device Is Played (Mhl Auto Input)
This allows you to turn the function that automatically switches input to the MHL device input on or off when the MHL device is played. 1. Select [Settings] - [HDMI Settings] from the home menu. 2. Select [MHL Auto Input]. 3. Select [On] or [Off]. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 220: Changing The Assignment And Display For The Input Jacks
L: Displays an input to the Listen menu. W/L: Displays an input to both the Watch and Listen menus. COMPONENT (for STR-DN1050 only) You can set the video input jack(s) assigned to each input. For details, see “Using other video/audio input jacks (Input Assign).”...
Page 221: Changing The Name For Each Input (Name)
3. Select [Name]. An on-screen keyboard appears on the TV screen. 4. Press to select characters one by one to enter the name. 5. Select [Enter]. The name you entered is registered. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 222: Turning On/Off The Wi-Fi Function (Wi-Fi)
1. Select [Settings] - [Network Settings] from the home menu. 2. Select [Wi-Fi]. 3. Set to [On] or [Off]. Note You cannot change this setting when a LAN cable is connected to the receiver. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 223: Setting Up A Network (Internet Setting)
Setting up a network (Internet Setting) You can set up a network connection. For details on Internet Setting, see “Setting up a wired LAN connection” or “Selecting a wireless LAN connection method.” Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 224 You can check the settings (*) for [Connection Type], [Connection Status], [IP Address Setting], [IP Address], [SSID], [Security Type], [Subnet Mask], [Default Gateway], [DNS Settings], [Primary DNS], [Secondary DNS], and [MAC Address]. The setting items during setup differ depending on the network environment and connection type. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 225 2. Select [Device Name]. An on-screen keyboard appears on the TV screen. 3. Press to select characters one by one to enter the name. 4. Select [Enter]. The name you entered is registered. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 226 Setting control permissions to all devices on the home network (DLNA Control Permission) Setting whether to control this receiver from a device on the home network (DLNA Control Permission) Controlling the receiver using a smartphone or tablet device (SongPal) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 227 Note When the receiver is in standby mode, the (on/standby) indicator on the front panel lights up in amber if [Network Standby] is set to [On]. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 228 Setting control permissions to all devices on the home network (DLNA Control Permission) Setting whether to control this receiver from a device on the home network (DLNA Control Permission) Registering a TV SideView device to the receiver Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 229 1. Select [Settings] - [Bluetooth Settings] from the home menu. 2. Select [Bluetooth Pairing]. For details on subsequent procedures, see step 4 onwards in “Enjoying audio content stored on a BLUETOOTH device.” Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 230 Standby] is set to [Yes]. You can only select this parameter when a BLUETOOTH device is paired. Hint You can select [Bluetooth Standby] in [Settings] - [Bluetooth Settings] from the home menu. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 231 When you change this setting, the BLUETOOTH device is disconnected from the receiver automatically. Hint You can select [Bluetooth AAC] or [Bluetooth aptX] in [Settings] - [Bluetooth Settings] from the home menu. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 232 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Turning on/off the power for zone 2 (Power) (for STR-DN1050 only) You can turn on or off the power for zone 2 by the following procedure. 1. Select [Settings] - [Zone Settings] from the home menu.
Page 233 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Selecting the source signals for zone 2 (Input) (for STR-DN1050 only) You can select the source signals for zone 2 using the following procedure. 1. Select [Settings] - [Zone Settings] from the home menu.
Page 234 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Adjusting the volume for zone 2 (Volume) (for STR-DN1050 only) You can adjust the volume for zone 2 using the following procedure in the following cases: When using the connections described in “Connecting the speakers in zone 2 (for STR-DN1050 only).”...
Page 235 Selecting the language (Language) You can select the language of messages on the screen. 1. Select [Settings] - [System Settings] from the home menu. 2. Select [Language]. 3. Select the language you want. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 236 This function allows you to turn the information display which appears on the TV screen on or off when the volume level or sound field, etc. of the receiver is changed. 1. Select [Settings] - [System Settings] from the home menu. 2. Select [Auto Display]. 3. Select [On] or [Off]. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 237 [FM TUNER] or [AM TUNER] is selected as the input. The software of the receiver is being updated. If you use the Auto Standby mode and the sleep timer at the same time, the sleep timer has priority. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 238 3. Set to [On] or [Off]. Note New software version information does not appear in the following cases: The latest version is already being used. The receiver cannot obtain data via a network. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 239 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Checking the software version (Software Version) You can check the current software version of the receiver. 1. Select [Settings] - [System Settings] from the home menu. 2. Check [Software Version]. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 240 Once you start the update, you cannot restore the previous software version. If you try to update the software when the sleep timer is on, the sleep timer will turn off automatically. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 241 Press AMP MENU. Note Some parameters and settings may appear dimmed on the display panel. This means that they are either unavailable or fixed and unchangeable. Related Topic Menu list (on the display panel) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 242 [CLEARING] appears on the display panel for a while, then changes to [CLEARED!] . Note It takes a few minutes for the memory to be cleared completely. Do not turn the receiver off until [CLEARED!] appears on the display panel. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 243: Front Panel (Str-Dn1050)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Front panel (STR-DN1050) (on/standby) 2. SPEAKERS 3. CONNECTION PAIRING BLUETOOTH Operates the BLUETOOTH function. 4. TUNER PRESET +/– 5. NFC sensor 6. A.F.D./2CH, MOVIE, MUSIC 7. Display panel 8. DISPLAY 9. ZONE CONTROL, ZONE POWER 10.
Page 244 (*1), and [Bluetooth Standby] are set to [Off], and the receiver in zone 2 is turned off. For USA and Canadian models only For USA, Canadian, Mexican, and Australian models only Note The indicator flashes slowly when a software update is in progress. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 245: Front Panel (Str-Dn850)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Front panel (STR-DN850) (on/standby) 2. SPEAKERS 3. TUNING MODE, TUNING +/– Press TUNING MODE to operate a tuner (FM/AM). Press TUNING +/– to scan a station. 4. NFC sensor 5. A.F.D./2CH, MOVIE, MUSIC 6.
Page 246 (*1), and [Bluetooth Standby] are set to [Off]. For USA and Canadian models only For USA, Canadian, and Australian models only Note The indicator flashes slowly when a software update is in progress. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 247: Rear Panel (Str-Dn1050)
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Rear panel (STR-DN1050) 1. FM ANTENNA terminal 2. AM ANTENNA terminal 3. IR REMOTE IN/OUT jacks You can control the receiver from a distance by connecting an IR repeater (not supplied) to the IR REMOTE IN jack.
Page 248: Rear Panel (Str-Dn850)
You must connect your TV to HDMI OUT to watch images from the selected input. You can also use this port for maintenance and service. You must connect your TV to MONITOR OUT to watch images from the selected input. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 249 The applicable indicator lights up when the receiver is decoding the corresponding DTS format signals. DTS: DTS DTS-HD: DTS-HD 6. Speaker system indicator 7. Tuning indicator Lights up when the receiver tunes to a stereo broadcast. 8. HDMI OUT A + B (for STR-DN1050 only) 9. SLEEP...
Page 250 PL: Dolby Pro Logic PLII: Dolby Pro Logic II PLIIx: Dolby Pro Logic IIx 15. ZONE2 (for STR-DN1050 only) Lights up while the power for zone 2 is turned on. 16. A.P.M. Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only set the A.P.M. function in the D.C.A.C.
Page 251 Save power by setting the receiver as follows: Set [Control for HDMI], [Pass Through], [Network Standby] (for USA and Canadian models only), and [Bluetooth Standby] to [Off]. Turn off the receiver in zone 2 (for STR-DN1050 only). 2. Input buttons Select the device you want to use.
Page 252 Adjust the volume level of all speakers at the same time. 11. HDMI OUTPUT Switches the output for two monitors connected to the HDMI OUT A and HDMI OUT B jacks (for STR-DN1050 only). Turns the output for HDMI TV OUT on/off (for STR-DN850 only).
Page 253 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Specifications POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) STR-DN1050: With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
Page 254: Fm Tuner Section
Digital (Coaxial): Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical): S/N: 100 dB (A, 20 kHz LPF) Output (Analog) ZONE 2 (for STR-DN1050 only): Voltage: 2 V/1 kilohm SUBWOOFER: Voltage: 2 V/1 kilohm Equalizer Gain levels: ±10 dB, 1 dB step...
Page 255 Video: 1 Vp-p, 75 ohms COMPONENT VIDEO (for STR-DN1050 only): Y: 1 Vp-p, 75 ohms PB: 0.7 Vp-p, 75 ohms PR: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through HDMI Video Input/Output (HDMI Repeater block) 4096 × 2160p @ 59.94/60 Hz: 2D (*1) 4096 ×...
Page 256 3D: Over-Under (Top-and-Bottom) (*3) 1920 × 1080p @ 25 Hz: 2D (*3) 3D: Frame packing 3D: Side-by-Side (Half) (*3) 3D: Over-Under (Top-and-Bottom) (*3) 1920 × 1080p @ 23.98/24 Hz: 2D (*3) 3D: Frame packing 3D: Side-by-Side (Half) (*3) 3D: Over-Under (Top-and-Bottom) (*3) 1920 ×...
Page 257: Bluetooth Section
3D: Over-Under (Top-and-Bottom) (*3) 720 × 480p @ 59.94/60 Hz: 2D (*3) 720 × 576p @ 50 Hz: 2D (*3) 640 × 480p @ 59.94/60 Hz: 2D (*3) Supports YUV 4:2:0 / 8 bit format only. Supports 8 bit format only. These formats are also supported by MHL connection.
Page 258: General Section
For USA and Canadian models only Dimensions (width/height/depth) (Approx.) STR-DN1050: 430 mm × 172 mm × 329.4 mm (17 in × 6 7/8 in × 13 in) STR-DN850: 430 mm × 156 mm × 329.4 mm (17 in × 6 1/4 in × 13 in) including projecting parts and controls Mass (Approx.)
Page 259 STR-DN850: 8.0 kg (17 lb 11 oz) Design and specifications are subject to change without notice. Related Topic Compatible USB devices and USB specifications Compatible iPhone/iPod/iPad models Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 260 MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing, LLC. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective...
Page 261 The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Android™ is a trademark of Google Inc. Google Play™ is a trademark of Google Inc. “Spotify” and “Spotify” logos are trademarks of the Spotify Group. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 262 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Software License Information WPA Supplicant Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi> and contributors All Rights Reserved. This program is licensed under the BSD license (the one withadvertisement clause removed). If you are submitting changes to the project, please see CONTRIBUTIONS file for more instructions.
Page 263 products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 264 received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
Page 265 exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or...
Page 266 "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
Page 267 addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
Page 268 Expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:...
Page 269 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Page 270 without the prior written consent of the Author. Any subroutines or modules supplied by You and linked into the Source Code or Executable Files this Work shall not be considered part of this Work and will not be subject to the terms of this License. Patent License.
Page 271 License. Individuals or entities who have received Derivative Works from You under this License, however, will not have their licenses terminated provided such individuals or entities remain in full compliance with those licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any termination of this License. If You bring a copyright, trademark, patent or any other infringement claim against any contributor over infringements You claim are made by the Work, your License from such contributor to the Work ends automatically.
Page 272 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. libvorbis http://www.xiph.org/vorbis/ Copyright (c) 2002-2004 Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 273 Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 274 M.I.T. makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 275 After checking the above items and fixing any problems, plug in the AC power cord (mains lead) and turn on the receiver. If the problem persists, consult your nearest Sony dealer. Notes on use...
Page 276 An over-current from the (USB) port was detected. The receiver will automatically turn off after a few seconds. Check the iPhone/iPod or USB device, then unplug it and turn on the power again. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 277 Warning 43: The distance and position of a subwoofer cannot be detected. This may be caused by noise. Try performing the measurement in a quiet environment. NO WARNING: There is no warning information. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 278 No device is connected: No iPhone or iPod is connected. No Track: No track was found. Headphone is not supported: No sound is output from the headphones when an iPhone or iPod is connected. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 279 The receiver cannot play the audio file due to an incompatible file format or playback restrictions. Not in use: An operation that is currently prohibited has been attempted. No Track: No track was found. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 280 The receiver is turned off automatically. [Auto Standby] is set to [On]. The sleep timer function was activated. [PROTECTOR] was activated. Related Topic Setting standby mode (Auto Standby) Using the sleep timer PROTECTOR Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 281 The output of the HDMI video signals of the receiver may be set to [HDMI OFF]. In this case, set to [HDMI ON] (for STR-DN850 only). set to [HDMI A], [HDMI B], or [HDMI A + B] (for STR-DN1050 only). Notes on use...
Page 282 Depending on the TV or the video device, 3D images may not be displayed. Check the HDMI video formats supported by the receiver. Be sure to use a High Speed HDMI cable. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 283 TV and video device. Also, make sure you connect the video device to the 4K-compatible HDMI IN jack of this receiver. Be sure to use a High Speed HDMI cable. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 284 One-Touch Play operation, or turn on the receiver to select the HDMI device from which you want to enjoy content. Make sure [Pass Through] is set to [On] (For USA, Canadian, Mexican, and Australian models only) or [Auto] in the HDMI Settings menu. Related Topic Passing HDMI signals through (Pass Through) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 285 Press HOME to turn the GUI on. Check that the TV is connected correctly. Depending on the TV, the GUI menu may take some time to appear on the TV screen. For STR-DN1050 only For STR-DN850 only Notes on use...
Page 286 If the PURE DIRECT indicator on the front panel lights up, press PURE DIRECT to turn off this function. Press DIMMER on the receiver to adjust the brightness of the display panel. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 287 [AMP]. However, the sound will not be output through the TV speaker. Sound may be interrupted when the sampling frequency, number of channels or audio format of audio output signals from the playback device is switched. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 288 Check that the connecting cables are not near a transformer or motor, and are at least 3 meters (10 feet) away from a TV set or fluorescent light. Move your audio device away from the TV. The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 289 Depending on the selected sound field, sound may not be available from the subwoofer. There is no sound from the subwoofer when all speakers are set to [Large] and [Neo:6 Cinema] or [Neo:6 Music] is selected. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 290 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 There is no sound from a specific device. Check that the device is correctly connected to the corresponding audio input jacks. Check that the cable(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the device.
Page 291 Check that the selected digital audio input jack is not assigned to another input. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 292 MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 The left and right sound is unbalanced or reversed. Check that the speakers and device are connected correctly and securely. Adjust the sound level parameters using the Speaker Settings menu. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 293 Set [Audio Out] to [AMP] in the HDMI Settings menu. You can only enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), DSD and Multi Channel Linear PCM with an HDMI connection. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 294 Make sure you have selected a sound field for movies or music. [PLII Movie], [PLII Music], [PLIIx Movie], [PLIIx Music], [Neo:6 Cinema] and [Neo:6 Music] do not work when the speaker pattern is set to 2/0 or 2/0.1. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 295 A test tone is not output from the speakers. The speaker cables may not be connected securely. Check that they are connected securely and cannot be disconnected by pulling on them slightly. The speaker cables may have short-circuited. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 296 A test tone is output from a different speaker than the speaker displayed on the TV screen. The speaker pattern setup is incorrect. Make sure that the speaker connections and the speaker pattern match correctly. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 297 Play operation, or turn on the receiver to select the HDMI device from which you want to enjoy content. Make sure [Pass Through] is set to [On] (For USA, Canadian, Mexican, and Australian models only) or [Auto] in the HDMI Settings menu. Related Topic Passing HDMI signals through (Pass Through) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 298: The Fm Reception Is Poor
Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antennas (aerial) as shown below. Receiver Outdoor FM antenna (aerial) Related Topic The FM stereo reception is poor. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 299: The Fm Stereo Reception Is Poor
2. Select a station on the FM band. 3. Press OPTIONS. 4. Select [STEREO/MONO] from the menu. 5. Select [MONO]. Note You can set FM mode in the options menu if the frequency indication is selected in step 3. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 300: You Cannot Tune To Radio Stations
No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations is used). Preset the stations. Press DISPLAY repeatedly on the remote control so that the frequency appears on the display panel. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 301: Rds Does Not Work (For European And Australian Models Only)
Make sure that you are tuned to an FM RDS station. Select a stronger FM station. The station you tuned to is not transmitting the RDS signal or the signal is weak. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 302: The Rds Information That You Want Does Not Appear (For European And Australian Models Only)
The RDS information that you want does not appear (for European and Australian models only). The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 303: The Sound Is Distorted
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 The sound is distorted. Press - on the remote control repeatedly. You can also use MASTER VOLUME on the receiver. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 304: There Is No Sound From An Iphone/Ipod
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 There is no sound from an iPhone/iPod. Disconnect the iPhone/iPod and connect it again. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 305: An Iphone/Ipod Cannot Be Charged
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 An iPhone/iPod cannot be charged. Check that the receiver is turned on. Make sure the iPhone/iPod is connected securely. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 306: An Iphone/Ipod Cannot Be Operated
Turn off the receiver, then disconnect the iPhone/iPod. Turn on the receiver again and reconnect the iPhone/iPod. You are using an incompatible iPhone/iPod. See “Compatible iPhone/iPod/iPad models” for the compatible device types. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 307: The Ringtone Volume Of An Iphone Does Not Change
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 The ringtone volume of an iPhone does not change. Adjust the ring volume using the controls on the iPhone. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 308: Are You Using A Compatible Usb Device
The USB device is not recognized. File or folder names are not displayed on this receiver. Playback is not possible. The sound skips. There is noise. Distorted sound is output. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 309: There Is Noise, Skipping, Or Distorted Sound
There is noise, skipping, or distorted sound. Turn off the receiver, reconnect the USB device, and then turn on the receiver. The music data itself contains noise, or the sound is distorted. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 310: A Usb Device Is Not Recognized
Turn off the receiver, then disconnect the USB device. Turn on the receiver again and reconnect the USB device. Connect a compatible USB device. The USB device does not work properly. Refer to the section on how to deal with this problem in the operating instructions of the USB device. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 311: Playback Does Not Start
Playback does not start. Turn off the receiver, reconnect the USB device, and then turn on the receiver. Connect a compatible USB device. Select [USB] and select a folder/track, then press to start playback. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 312: A Usb Device Cannot Be Connected To The Usb Port
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 A USB device cannot be connected to the USB port. The USB device is being connected upside down. Connect the USB device in the correct orientation. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 313: Erroneous Display
Lower case letters (a to z) Numbers (0 to 9) Symbols (’ = < > * + , – . / @ [ \ ] _ `) Other characters may not be displayed correctly. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 314: Reading] Is Displayed For An Extended Time, Or It Takes A Long Time Before Playback Starts
The memory capacity is excessive. The internal memory is fragmented. We therefore recommend following these guidelines: Total folders on USB device: 256 or less (including [ROOT] folder) Total files per folder: 256 or less. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 315: An Audio File Cannot Be Played
Files that are encrypted, protected by passwords, etc. cannot be played. The receiver supports FAT16 and FAT32, but some USB devices may not support these FAT systems. For details, refer to the operating instructions of each USB device or contact the manufacturer. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 316: Cannot Connect To The Network Using Wps Via A Wireless Lan Connection
Cannot connect to the network using WPS via a wireless LAN connection. You cannot connect to a network using WPS if your access point is set to WEP. Set up your network after searching the access point using the access point scan. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 317: An Error Message Appears
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 An error message appears. Check the nature of the error. See “Network features message list.” Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 318: Cannot Connect To The Network
Wireless networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move the receiver away from these devices. Related Topic Checking the network information (Information) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 319: Cannot Control The Receiver Using A Tv Sideview Device
The TV SideView device may have been deleted from the receiver. Delete the receiver from the TV SideView device and then re-register the receiver. Related Topic Registering a TV SideView device to the receiver Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 320: Cannot Select The Network Settings Menu
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Cannot select the Network Settings menu. Wait for a few moments after you have turned on the receiver, and then select the Network Settings menu again. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 321: Cannot Connect To The Network
If the system is connected to a wireless network, move the receiver and the wireless LAN router/access point closer to each other. If you have initialized the receiver or performed a system recovery on your server, perform the network settings again. Related Topic Checking the network information (Information) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 322: A Server Does Not Appear In The Server List. ([No Server Is Available Appears On The Tv Screen.)
Try turning the multicast setting on or off on the wireless LAN router/access point. If your server is an software application on your PC, confirm the firewall setup and the security software settings. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 323: Playback Does Not Start, Or Does Not Automatically Proceed To The Next Track Or File
Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. Make sure that “repeat one,” “repeat all,” and “shuffle” are configured correctly. Press OPTION, then select [Repeat] or [Shuffle] to set to the playback mode. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 324: The Sound Skips During Playback
Depending on the network environment, it may not be possible to play tracks with more than one device operating at the same time. Turn off other devices to enable the receiver to play tracks. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 325: Cannot Play] Appears
Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. There may be some tracks that cannot be played on this receiver. Related Topic Compatible formats with DLNA Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 326: No Track] Appears
MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 [No Track] appears. If there are no folders or files that can be played on the receiver in the selected folder, you cannot expand the folder to display its contents. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 327: Cannot Play Copyrighted Files
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Cannot play copyrighted files. Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 328: Cannot Select A Previously Selected Track
Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Cannot select a previously selected track. The track information may have been changed on the server. Refresh the server list and then reselect the server. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 329 [External Control] is set to [Off]. Set it to [On] to control the receiver with “SongPal.” TV SideView is not registered. TV SideView Registration is required to control the receiver with TV SideView. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 330 The receiver itself does not support the Wake-on-LAN. Set [Network Standby] to [On] if you want to turn the receiver on by operating the devices on a network (for USA and Canadian models only). Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 331 The receiver cannot be found from an iPhone/iPad/iPod or iTunes. Make sure the iPhone/iPad/iPod or computer with iTunes is connected to your home network. Update the software of the receiver and the iPhone/iPad/iPod or iTunes to the latest version. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 332: The Sound Skips
The sound may skip depending on factors such as the network environment. Depending on the audio files, playback may require network speed. If you use a wired LAN connection, check the network hub and/or router. If you use a wireless LAN connection, check the access point and/or router. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 333 Update the software of the iPhone/iPad/iPod or iTunes to the latest version. Update the software of the receiver to the latest version. Connection between the AirPlay device and receiver may be lost. Restart the AirPlay device and/or the receiver. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 334 If your contract with your Internet provider limits Internet connection to one device at a time, this device will not be able to access the Internet when another device is already connected. Consult your carrier or service provider. Related Topic Checking the network information (Information) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 335: The Sound Skips
The bandwidth of your network may be too low. If using wireless LAN connection, move the receiver and the wireless LAN router/access point closer to each other, without any obstructions between them. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 336 Pairing may not be possible if there are other BLUETOOTH devices near the receiver. In this case, turn off the other BLUETOOTH devices. Correctly enter the same passkey that was entered on the BLUETOOTH device. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 337 While connected to a BLUETOOTH device, this receiver cannot be detected and a connection cannot be established from another BLUETOOTH device. Erase the pairing registration information of the BLUETOOTH device and perform the pairing operation again. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 338 If there are obstructions between the receiver and your BLUETOOTH device, remove these or move the receiver and/or device avoid them. If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 339 The sound of your BLUETOOTH device cannot be heard on the receiver. Turn up the volume on your BLUETOOTH device first, and then adjust the volume using + (or MASTER VOLUME on the receiver). Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 340 If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away. Turn down the volume of the connected BLUETOOTH device. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 341 Make sure your TV is connected to the HDMI OUT A jack of the receiver (for STR-DN1050 only). Make sure the HDMI OUTPUT setting is set to [HDMI A] or [HDMI A + B] (for STR-DN1050 only). Notes on use...
Page 342 If your TV has multiple HDMI input jacks, make sure the receiver is connected to the one supports the ARC function. Make sure your TV is connected to the HDMI OUT A jack of the receiver (for STR-DN1050 only). Make sure the HDMI OUTPUT setting is set to [HDMI A] or [HDMI A + B] (for STR-DN1050 only). Related Topic...
Page 343 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 An MHL-compatible source device cannot be charged. Check that the receiver is turned on. Make sure the device is connected securely. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 344 Check the settings of your device. For details, refer to the operating instructions of your device. Check that the device is connected via an MHL cable to the HDMI/MHL (VIDEO 2 IN) (*1), HDMI VIDEO 1 IN (MHL) (*1) or HDMI VIDEO IN (MHL) (*2) jacks. For STR-DN1050 only For STR-DN850 only Notes on use...
Page 345 Point the remote control at the remote control sensor on the receiver. Remove any obstructions between the remote control and the receiver. Replace both of the batteries in the remote control with new ones if they are weak. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 346 Refer to the following websites for the latest information on the receiver. For customers in the USA: http://esupport.sony.com/ For customers in Canada: http://esupport.sony.com/CA/ For customers in Latin America: http://esupport.sony.com/LA For customers in Europe: http://support.sony-europe.com/ For customers in Australia: http://www.sony-asia.com/support Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 347 Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Subwoofer Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 348 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 7.1-channel speaker system using surround back speakers You can enjoy high-fidelity reproduction of recorded sound from DVD or Blu-ray Disc software in 6.1-channel or 7.1- channel format. Front speaker (Left) Front speaker (Right)
Page 349 Place the surround back speakers as shown in the illustration below. The angles shown by should be the same. Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 350 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 7.1-channel speaker system using front high speakers You can enjoy vertical sound effects by connecting additional two front high speakers. Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right)
Page 351 2. Place the front high speakers at height angle of 20° ± 5°. Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 352 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 How to connect speaker cables Connect speaker cables as illustrated below. Strip the jacket to 10 mm (13/32 in) at each end of the speaker cables. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 353 You can check the BLUETOOTH device information by pressing DISPLAY repeatedly. Each time you press DISPLAY, the display will change cyclically as follows: BLUETOOTH device name - BLUETOOTH device address - Sound field currently applied - Volume level - Input you selected Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 354 6. Select [Enter]. The name you entered is registered. Canceling naming input Press RETURN. Note Some letters that can be displayed on the TV screen cannot be displayed on the display panel. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 355 You cannot select [2ch Analog Direct] while using the BD/DVD, GAME, VIDEO 2, BLUETOOTH, USB, Home Network, Music Services, or AirPlay function. [Multi Stereo] does not work when multi-channel audio signals are being received. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 356 HD-D.C.S.: HD Digital Cinema Sound (HD-D.C.S.) is Sony’s new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on the precise response measurement data of a mastering studio.
Page 357 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Music mode You can take advantage of surround sound simply by selecting one of the receiver’s pre-programmed sound fields. These bring the exciting and powerful sound of concert halls into your home. Berlin Philharmonic Hall (BERLIN): Reproduces the sound characteristics of the Berlin Philharmonic Hall.
Page 358 Headphone (Direct) (HP DIRECT) : This mode is selected automatically if you use headphones when [2ch Analog Direct] is selected. This mode outputs analog signals without processing by the equalizer, sound field, etc. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 359 AIFF: 8 kHz – 192 kHz, 16/24 bit PCM ALAC: 32 kHz - 96 kHz, 16/24 bit ALAC DSD (for STR-DN1050 only): 2.8 MHz, 1 bit DSD The receiver does not play files encoded with DRM. Note Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed.
Page 360 1. Select [Settings] - [Network Settings] from the home menu. 2. Select [DLNA Control Permission]. 3. Select the device you want. 4. Select [Remove]. 5. Select [OK]. The selected device is deleted from the device list. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 361 1. Select [Settings] - [Network Settings] from the home menu. 2. Select [TV SideView Setup]. 3. Select the device you want to delete. 4. Select [Delete]. 5. Select [OK]. The selected device is deleted from the device list. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 362 When you play content on a device connected to the receiver via an HDMI connection, the receiver is also automatically turned on and switched to the appropriate HDMI input. Note Depending on the TV, the start of the content may not appear. Related Topic Passing HDMI signals through (Pass Through) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 363 When [Control for HDMI] is set to [On], the [Audio Out] settings in the HDMI Settings menu will be set automatically based on the System Audio Control settings. Hint You can also operate this function using the TV menu. For details, refer to the operating instructions of the TV. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 364 Turn on the power supply interlock function of the TV before using the System Power Off function. For details, refer to the operating instructions of the TV. Some connected devices may not be turned off depending on their specifications. For details, refer to the operating instructions of the connected device. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 365 Switching the sound field for the scene selected on your TV (Scene: Sound field) Cinema: HD-D.C.S. Sports: Sports Music: Live Concert Animation: A.F.D. Auto Photo: A.F.D. Auto Game: A.F.D. Auto Graphics: A.F.D. Auto Note The sound field may not change depending on some TVs. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 366 [Sound Optimizer], [Dual Mono], or [A/V Sync]. Note Your TV must be able to access a broadband service to use the Home Theatre Control function. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 367 TV. Note The receiver is recognized as [Tuner] by the TV. Your TV must support the link menu. Some of the operations may not be available depending on the type of TV. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 368: Remote Easy Control
[Control for HDMI] is set to [On]. The MHL device is connected via an MHL cable (not supplied) to the HDMI/MHL (VIDEO 2 IN) (for STR-DN1050 only), HDMI VIDEO 1 IN (MHL) (for STR-DN1050 only) or HDMI VIDEO IN (MHL) (for STR-DN850 only) jack.
Page 369 It may not be possible to take the correct measurements or to perform Auto Calibration at all if special speakers such as dipole speakers are used. Related Topic Confirming active subwoofer setup Selecting the front speakers Connecting the optimizer microphone Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 370 1. Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2. Set up the optimizer microphone. Place the optimizer microphone where you will sit and set it at the same height as your ears. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 371 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Selecting the front speakers You can select the front speakers you want to operate. Be sure to use the buttons on the receiver to perform this operation. 1. Press SPEAKERS on the receiver repeatedly to select the front speaker system you want to operate.
Page 372 The D.C.A.C. is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference using [Test Tone]. Related Topic Outputting a test tone from each speaker (Test Tone) Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 373 If you connect a subwoofer with an auto standby function, set it to off (deactivated). Note Depending on the characteristics of the subwoofer you are using, the setup distance value may be different from the actual position. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 374 The measurement results may vary depending on the position of the subwoofer. However, continuing to use the receiver with that value does not cause problems. Related Topic List of messages after Auto Calibration measurements Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...
Page 375 Help Guide MULTI CHANNEL AV RECEIVER STR-DN1050/STR-DN850 Menu list (on the display panel) The following options are available in each menu. Auto Calibration settings [<AUTO CAL>] Auto Calibration start [A.CAL START] Auto Calibration type [CAL TYPE] (*1) FULL FLAT, ENGINEER, FRONT REF, OFF Automatic Phase Matching [A.P.M.] (*1)
Page 376 LARGE, SMALL Surround back speaker assign [SB ASSIGN] (*4) SPK B, ZONE2 (for STR-DN1050 only), BI-AMP, OFF Front left speaker distance [FL DIST.] (*2) FL 1.00 m to FL 10.00 m (FL 3’3” to FL 32’9”) (0.01 m (1 inch) interval) Front right speaker distance [FR DIST.] (*2)
Page 377 (Name).” in Input Settings menu. Digital audio input assignment [A. ASSIGN] OPT 1, OPT 2, COAX, NONE Component video input assignment [V. ASSIGN] (for STR-DN1050 only) COMP 1, COMP 2, NONE Surround settings [<SURROUND>] HD-D.C.S. effect type [HD-D.C.S. TYP] (*6) DYNAMIC, THEATER, STUDIO EQ settings [<EQ>]...
Page 378 Digital broadcast language selection [DUAL MONO] MAIN/SUB, MAIN, SUB Dynamic Range Compressor [D. RANGE] COMP. ON, COMP. AUTO, COMP. OFF HDMI settings [<HDMI>] 4K Scaling [4K SCALING] (for STR-DN1050 only) AUTO, OFF Control for HDMI [CTRL: HDMI] CTRL ON, CTRL OFF Pass Through [PASS THRU]...
Page 379 You can only select this parameter if you select [HD-D.C.S.] as the sound field. For USA, Canadian, Mexican, and Australian models only You can only select this parameter when a BLUETOOTH device is paired. x.xxx represents the version number. Notes on use 4-488-938-11(1) Copyright 2014 Sony Corporation...

This manual is also suitable for:

Str-dn850

Sony STR-DN1050 Help Manual

Quick Links

Related Manuals for Sony STR-DN1050

Summary of Contents for Sony STR-DN1050

This manual is also suitable for:

Table of Contents