Fujitsu ETERNUS DX100 S3 Configuration Manual Server Connection
Disk storage system
Hide thumbs
Also See for ETERNUS DX100 S3:
- User manual (946 pages) ,
- Setup manual (129 pages) ,
- Operation manual (114 pages)
Related Manuals for Fujitsu ETERNUS DX100 S3
Summary of Contents for Fujitsu ETERNUS DX100 S3
- Page 1 P3AM-7982-05ENZ0 FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk Storage System Settings...
- Page 2 This page is intentionally left blank.
- Page 3 This manual should be used in conjunction with any other applicable user manuals, such as those for the ETERNUS DX, server, OS, Converged Network Adapter cards, and drivers. Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations used in this manual such as product trademarks and product names.
-
Page 4: Table Of Contents
2.1.5 Registering the WWNs of the Accessing Converged Network Adapter Cards (Setting FCoE Host) ......9 2.1.6 Allocating LUN Groups (Setting the Host Affinity)....................10 2.2 Specific Settings ........................... 10 2.2.1 Setting the CA Reset Groups..........................10 2.3 Checking the WWNs ........................10 FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED P3AM-7982-05ENZ0... - Page 5 List of Tables Table 2.1 FCoE port parameter settings ........................8 Table 2.2 Host response settings ..........................9 FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED P3AM-7982-05ENZ0...
-
Page 6: Chapter 1 Workflow
Workflow This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX" section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE)" for each OS. Required Documents Fabric OS Administrator’s Guide Supporting Fabric OS •... - Page 7 "2.3 Checking the WWNs" (page 10) • After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE)" for each OS. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-...
-
Page 8: Chapter 2 Setting Up The Eternus Dx
The server cannot recognize the ETERNUS DX LUNs unless they are assigned in this order. This restriction does not apply when the server is running a Solaris OS. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED... -
Page 9: Setting The Host Responses
ETERNUS DX LUNs. When a server-side Converged Network Adapter card is replaced, the WWN of the replacement Converged Network Adapter card must be re-registered to the ETERNUS DX. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED P3AM-7982-05ENZ0... -
Page 10: Allocating Lun Groups (Setting The Host Affinity)
Checking the WWNs Use ETERNUS Web GUI to check the WWN of each ETERNUS DX. They are required for connecting the ETERNUS DX to the server. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED P3AM-7982-05ENZ0... - Page 11 • operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information • in this manual.