Manual Wireless Network Setup - D-Link DIR-514 User Manual

Hide thumbs Also See for DIR-514:

User manual (88 pages)

Faq (48 pages)

Quick installation manual (37 pages)

Table Of Contents

Table of Contents

Section 3 - Configuration

Enable

Check the box to enable the wireless function. If you do not want to

Wireless:

use wireless, uncheck the box to disable all the wireless functions.

Wireless

Service Set Identifier (SSID) is the name of your wireless network.

Network Name:

Create a name using up to 32 characters. The SSID is case-sensitive.

802.11 Mode:

Select one of the following:

802.11g Only - Select if all of your wireless clients are 802.11g.

802.11n Only - Select only if all of your wireless clients are 802.11n.

Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n

and 11g wireless clients.

Enable Auto

The Auto Channel Scan setting can be selected to allow the DIR-514

Channel Scan:

to choose the channel with the least amount of interference.

Wireless

Indicates the channel setting for the DIR-514. By default the channel

Channel:

is set to 6. The Channel can be changed to fit the channel setting for

an existing wireless network or to customize the wireless network. If

you enable Auto Channel Scan, this option will be greyed out.

Transmission

Select the transmit rate. It is strongly suggested to select Best(Auto)

Rate:

for best performance.

Channel

Select the Channel Width:

Width:

Auto 20/40 - This is the default setting. Select if you are using both

802.11n and non-802.11n wireless devices.

20MHz - Select if you are not using any 802.11n wireless clients.

40MHz - Select if using only 802.11n wireless clients.

Visibility

Select Invisible if you do not want the SSID of your wireless network

Status:

to be broadcasted by the DIR-514. If Invisible is selected, the SSID of

the DIR-514 will not be seen

D-Link DIR-514 User Manual