Cisco 7906G Administration Manual page 104
Unified ip phone for cisco unified callmanager 4.1(3)
Hide thumbs
Also See for 7906G:
- Administration manual (278 pages) ,
- User manual (112 pages) ,
- User giude (90 pages)
Table of Contents
Advertisement
Network Configuration Menu
Table 4-2
Network Configuration Menu Options (continued)
Option
Description
TFTP Server 2
Optional backup TFTP server that
the phone uses if the primary TFTP
server is unavailable.
If neither the primary TFTP server
nor the backup TFTP server is
listed in the CTL file on the phone,
you must unlock the CTL file
before you can save changes to the
TFTP Server 2 option. In this case,
the phone will delete the CTL file
when you save changes to the
TFTP Server 2 option.
For information about the CTL file,
refer to
Cisco Unified CallManager
Security Guide. For information
about unlocking the CTL file, see
to the
on page
Default Router 1
Default router used by the phone
(Default Router 1) and optional
Default Router 2
backup routers (Default Router
Default Router 3
2–5).
Default Router 4
Default Router 5
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
4-10
"CTL File Screen" section
7-3.
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock the CTL file, if necessary.
1.
Unlock network configuration options.
2.
Enter an IP address for the TFTP Server 1
3.
option.
Scroll to the TFTP Server 2 option, press
4.
the Edit softkey, and then enter a new
backup TFTP server IP address.
Press the Validate softkey, and then press
5.
the Save softkey.
Unlock network configuration options.
1.
Set the DHCP Enabled option to No.
2.
Scroll to the appropriate Default Router
3.
option, press the Edit softkey, and then
enter a new router IP address.
Press the Validate softkey.
4.
Repeat Steps 3 and 4 as needed to assign
5.
backup routers.
Press the Save softkey.
6.
OL-10008-01
Advertisement
Table of Contents
Troubleshooting
