Network Configuration - Cisco 7906G Administration Manual
Unified ip phone for cisco unified callmanager 4.1(3)
Hide thumbs
Also See for 7906G:
- Administration manual (278 pages) ,
- User manual (112 pages) ,
- User giude (90 pages)
Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Network Configuration
The Network Configuration menu contains the Load Server option. The Load
Server option is used to optimize installation time for phone firmware upgrades.
You can set the Load Server to another TFTP server IP address or name (other
than the TFTP Server 1 or TFTP Server 2) from which the phone firmware can be
retrieved for upgrades on the phones. When the Load Server option is set, the
phone contacts the designated server for the firmware upgrade.
Even if a Load Server is configured, the phone continues to use TFTP Server 1 or
Note
TFTP Server 2 for obtaining configuration files.
To configure the Load Server option, use the Cisco Unified CallManager
Administration Phone Configuration page, Product Specific Configuration
section.
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
4-24
OL-10008-01
Advertisement
Table of Contents
Troubleshooting
