WM-FS555/FS556 TABLE OF CONTENTS Flexible Circuit Board Repairing Specifications ................1 • Keep the temperature of the soldering iron around 270°C during 1. GENERAL repairing............... 2 • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).
WM-FS555/FS556 SECTION 2 DISASSEMBLY The equipment can be removed using the following procedure. Mechanism deck Belt, Capstan/reel motor (M601), Chassis, H/P board Main board Magnetic head (playback) (HP901) Note : Follow the disassembly procedure in the numerical order given. 2-1. CHASSIS, H/P BOARD 2 Two screws (B1.7 ×...
WM-FS555/FS556 2-3. MECHANISM DECK Chassis 1 Claws Mechanism deck 2-4. BELT, CAPSTAN/REEL MOTOR (M601), MAGNETIC HEAD (PLAYBACK) (HP901) 2 Two screws (M1.4) 4 Two screws (M1.4) 3 Capstan/reel motor Mechanism deck (M601) • How to apply the belt Capstan/reel motor...
WM-FS555/FS556 SECTION 3 ADJUSTMENTS 3-1. MECHANICAL ADJUSTMENTS 3-2. ELECTRICAL ADJUSTMENTS PRECAUTION PRECAUTION 1. Clean the following parts with a denatured-alcohol-moistened • Supplied voltage : 1.5 V. swab : • Switch and control position (MENU display) playback head pinch roller MEGA BASS : OFF...
Page 6
WM-FS555/FS556 TUNER SECTION 0 dB = 1µV AM TRACKING ADJUSTMENT Adjust for a maximum reading on level meter. AM Section 620kHz <621kHz> BAND : AM 1,400kHz <1,395kHz> AM RF signal Put the lead-wire generator antenna close to the set. FM FREQUENCY COVERAGE CONFIRMATION...
Page 7
WM-FS555/FS556 Adjustment Location : [MAIN BOARD] (SIDE A) L2 : FM Tracking Adjustment L7 : TV Tracking Adjustment CT1 : AM Tracking Adjustment L5 : AM Frequency Coverage Adjustment L4: AM Tracking Adjustment...
WM-FS555/FS556 4-2. BLOCK DIAGRAMS EXCEPT US MODEL POWER AMP PRE AMP HP901 IC301 (2/2) US MODEL IC301 (1/2) PLAY BACK RV301 HEAD VOLUME PRE AMP R-CH PRE OUTA J301 PW INA OUTA HEADPHONE PW NFA Q101 AVSL PRE NFA Q305...
WM-FS555/FS556 4-3. PRINTED WIRING BOARDS – MAIN SECTION – Semiconductor M601 Location CAPSTAN/REEL MOTOR Ref. No. Location (SIDE A) MAIN BOARD (SIDE B) MAIN BOARD HOLD . D401 D402 D701 HP901 IC301 PLAYBACK IC601 IC701 HEAD IC703 L-CH Q101 Q102...
WM-FS555/FS556 4-4. SCHEMATIC DIAGRAM − MAIN SECTION (1/2) − Refer to page 13 for Notes. Refer to page 13 for Waveforms. Refer to page 13 for IC Block Diagrams.
WM-FS555/FS556 Note on Schematic Diagram: MAIN SECTION Waveforms • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and W or less unless otherwise specified.
Page 14
WM-FS555/FS556 IC301 TA2160FN (EL) RF & REF PW C AGC DET PW A PW B PRE A PRE B BST SW IC601 MM1279XVBE MOTIVE CONTROL DRIVER CIRCUIT MOTIVE SOFT MOTIVE LOGIC SWITCH /OSC INVERTER BIAS VREF SPEED CURRENT REFERENCE CONTROL...
WM-FS555/FS556 SECTION 5 EXPLODED VIEWS NOTE : • Hardware (# mark) list and accessories and packing • -XX, -X mean standardized parts, so they materials are given in the last of this parts list. may have some difference from the original one.
WM-FS555/FS556 Ver 1.2 2003.02 SECTION 6 MAIN ELECTRICAL PARTS LIST NOTE : • Due to standardization, replacements in the • Items marked “ * ”are not stocked since they When indicating parts by reference num- parts list may be different from the parts are seldom required for routine service.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2002.02 2003.01 Part No. correction of exploded views (Ref. No. 127). (SPM-02058) 2003.02 6US model and 2CND model addition for WM-FS555. (ENG-03006)