Preface; Audience; Purpose - Cisco Catalyst 2970 Hardware Installation Manual

Hide thumbs Also See for Catalyst 2970:

Table of Contents

OL-6422-01

Preface

This guide is for the networking or computer technician responsible for installing

the Catalyst 2970 switch, hereafter known as the switch. We assume that you are

familiar with the concepts and terminology of Ethernet and local area networking.

This guide describes the hardware features of the Catalyst 2970 switch. It

describes the physical and performance characteristics of the switch, explains

how to install it, and provides troubleshooting information.

This guide does not describe system messages that you might receive or how to

configure your switch. For more information, refer to the switch software

configuration guide, the switch command reference, and the switch system

message guide on the Cisco.com Product Documentation home page. For

information about the standard Cisco IOS Release 12.1 or 12.2 commands, see

the Cisco IOS documentation set from the Cisco.com home page at Service and

Support > Technical Documents. On the Cisco Product Documentation home

page, select Release 12.1 or 12.2 from the Cisco IOS Software drop-down list.

Catalyst 2970 Switch Hardware Installation Guide

Table of Contents