Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Haier HDW12-TFE3SS
Summary of Contents for Haier HDW12-TFE3SS
- Page 1 Dishwasher HDW12-TFE3SS HDW12-TFE3WH Instructions for Use 0120504778D...
-
Page 2: Table Of Contents
Index Safety information Installation Getting to know your dishwasher How to fill rinse aid How to fill the detergent dispenser Not suitable for the dishwasher Arranging crockery, glasses, etc. in the dishwasher Programme overview Washing dishes How to keep your dishwasher in shape Care and maintenance Trouble Shooting Technical data... -
Page 3: Safety Information
At time of delivery Check packaging and dishwasher immediately for signs of transport damage. If the appliance is damaged, do not put it into use but contact your supplier or customer service without delay. Please dispose of packaging materials properly. During installation This appliance is intended to be used in household and similar applications such as: - farm houses.- by clients in hotels, motels and other residential type environments. -
Page 4: If A Fault Occurs
If your family includes children This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capcabilities, or lack of experience and knowledge,unless they have been given supervi- sion or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they to not play with the appliance. -
Page 5: Installation
While installing the dishwasher, check the drain hose is not restricted or kinked. Connections and services Check that the power cord is long enough to reach the outlet. If it isn’t, it must be replaced by a Haier authorised technician. Extension cords or multi-outlet power boards should not be used to connect the dishwasher to the power supply. - Page 6 Product and cabinetry dimensions Product dimensions (mm) overall height of product with top panel in place 850 (min) -870 (max)** with top panel removed* 820 (min) -840 (max)** overall width of product overall depth of product depth of open door (measured from front of kickstrip) Cabinetry dimensions (mm)
- Page 7 Preparing the product and cabinetry The top panel may be removed to suit underbench cavity height. See the illustrations below. Important! To prevent possible steam damage to the cabinetry, ensure that any bare wood surrounding the dishwasher is sealed with an oil-based paint or moisture-proof polyurethane. Services can be located either side of the dishwasher.
- Page 8 Levelling and positioning the dishwasher Before sliding the dishwasher into position, adjust the feet with a spanner (1) to ensure that the dishwasher is level (2) and the required height. Do not lift the dishwasher from the door handle or top panel. Position the dishwasher in the cavity, ensuring that the hoses and power cord don’t get bent, crimped, or trapped under the dishwasher in the process (3).
- Page 9 Plumbing -- Waste connection These drainage options are designed to eliminate problems that occur with combined sink-dishwasher waste systems. Drainage option A: Separate sink and dishwasher waste systems The standpipe must have a minimum diameter of 38 mm and stand 750 mm above the floor. Use the supplied drain hose support to hold the drain hose in place in the standpipe.
- Page 10 Plumbing -- Water inlet connection Important! The appliance should be connected to the water main using the new water inlet hose supplied. Old hoses should not be used. Do not shorten the inlet hose. Take note of water connection requirements. The dishwasher has a single valve water connection.
-
Page 11: Electrical Connection
This should only be done by a Haier authorised technician. Do not modify or cut the plug. Do not use an adaptor, extension cord, or multi-outlet power board to connect the dishwasher to the power supply, as these could cause overheating and create a fire hazard. -
Page 12: Getting To Know Your Dishwasher
Getting to know your dishwasher Close-up view (control panel) delay "POWER" Light "DELAY" Button "POWER" Button Time-remaining Indicator "HALF LOAD" Light Low Rinse Aid Indicator Light "HALF LOAD" Button Heat Indicator Light "DELAY" Light Knob For Selecting Cycle Dishwasher interior Upper Rack Bottom Spray Arm Washing Filter... -
Page 13: How To Fill Rinse Aid
How to fill rinse aid Rinse aid This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door . When the low rinse aid indicator "H"on the control panel and the me- chanical indicator "H1"... -
Page 14: How To Fill The Detergent Dispenser
How to fill the detergent dispenser Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle fol- lowing the instructions provided in the "Programme overview". The de- tergent dispenser is located on the inside panel of the door. -
Page 15: Not Suitable For The Dishwasher
Not suitable for the dishwasher What you should not put into the dishwasher Cutlery and tableware manufactured in whole or part from wood.They become faded and unsightly in appearance.Furthermore,the adhesives that are used are not suitable for the temperature that occur inside the dishwasher.Delicate decorative glassware and vases,special antique or irreplaceable china. -
Page 16: Arranging Crockery, Glasses, Etc. In The Dishwasher
Arranging crockery, glasses, etc. in the dishwasher Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, which re- sults in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washed. - Page 17 How to use the upper rack The upper rack is designed to hold more delicate and lighter dishware, such as glasses, cups and saucers, plates, small bowls and shallow pans (as long as they are not too dirty)(see fig.E). Position the dishes and cookware so that they do not get moved by the spray of water.
-
Page 18: Programme Overview
Programme overview Detergent Half Wash Rinse Types of load Description of cycle Extended Load programme Prewash Wash Pre-wash with hot water. Very dirty dishes, Extended wash. pots and pans. (Not HEAVY Rinses with cold water. to be used with deli- Rinse with hot water. -
Page 19: Washing Dishes
Washing dishes Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence, duration and consumption details are shown in the right half of the overview. -
Page 20: End Of Programme
End of programme Six beeps will indicate that the wash cycle has finished and the state indicators "A" light. Switching the dishwasher OFF Several minutes after the programme has ended: Set On-Off button to Off Open the door . Turn the water tap off. Remove dishes, etc. - Page 21 After 3 seconds the delayed start indicator “ E ” blinks, the time-remaining indicator “ G ” will blink and decrease , the programme will start until the delayed start indicator “ G ” goes out . Cancelling or modifying a cycle A cycle that is underway can be modified if it has only been running for a short time.
-
Page 22: How To Keep Your Dishwasher In Shape
How to keep your dishwasher in shape After Every Wash After every wash, turn off the water supply the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside. Remove the plug Before cleaning or performing maintenance, always switch off the remove the plug from the socket. Do not run risks. -
Page 23: Care And Maintenance
Care and maintenance Regular inspection and maintenance of your appliance helps to prevent problems from occurring.This saves time and aggravation.You should therefore carefully inspect the inside of your dishwasher from time to time. Overall condition of appliance Check that no grease or scale has accumulated on the inside of the dishwasher. If you discover any deposits: Clean the interior of the dishwasher thorughly with a dishwasher detergent solution. -
Page 24: Trouble Shooting
Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms “ 9 ” and “ 10 ” and the arm mountings. Inspect the nozzles in the spray arms for blocked holes due to remnants of food. - Page 25 Error display on the time-remaining indicator When the buzzer emits 10 short warning signal every 30 seconds and the time-remaining indicator display "E3" Have you checked whether: the drain hose is too low. When the buzzer emits 10 short warning signals every 30 seconds and the time-remain- ing indicator display "E4"...
- Page 26 When the buzzer emits 10 short warning signals every 30 seconds and the time remain- ing indicator display "E2" or "E6", Contact the nearest authorized service center. If you take all these checks and the dishwasher still does not function or your dish- washer have any other error display, you can power the dishwasher OFF, and wait a few minutes.
- Page 27 Water remains inside appliance after programme has ended Blockage or kind in drainage hose. Pump is jammed. Filters are blocked. The programme is still running. Wait for the programme to end ..during washing Unusual amount of foam is creased Normal washing up liquid has been poured into the rinse-aid container.
- Page 28 Plastic items are discoloured Not enough detergent was added to dispenser. Detergent has insuffcient bleaching properties. Use a detergent containing a chemical bleaching agent. White stains are left on crockery, glasses have a milky appearance Not enough detergent was added to dispenser compartment. Amount of rinse-aid was set too low.
-
Page 29: Technical Data
Technical data 60 cm Width Depth 60 cm Height 85 cm Capacity 12 standard place settings Mains water pressure 0.03-1.0MPa Power voltage 220-240V~ 50Hz Maximum current intensity 1950W Total absorbed power Important information Notes on waste disposal Old appliances still have some residual value. An environment-friendly method of disposal will ensure that valuable raw materials can be recovered and used again. -
Page 30: General Information
General information Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards. Information on comparability tests implemented in compliance with AS/NZS 2007 Appliance loaded in accordance with standard specifications.