Motorola WS 2000 Configuration Manual
View certified configuration guide
Hide thumbs
Also See for WS 2000:
- System reference manual (680 pages) ,
- Cli reference manual (452 pages) ,
- Specification sheet (4 pages)
Related Manuals for Motorola WS 2000
Summary of Contents for Motorola WS 2000
- Page 1 VIEW Certified Configuration Guide Motorola WS 2000 with AP 300 June 2008 Edition 1725-36066-001 Version D...
-
Page 2: Copyright Notice
Configuration Guide Trademark Information Notice Polycom® and the logo designs Polycom, Inc. has prepared this document for SpectraLink® use by Polycom personnel and customers. The LinkPlus drawings and specifications contained herein Link are the property of Polycom and shall be neither NetLink reproduced in whole or in part without the prior written approval of Polycom, nor be implied to... -
Page 3: Certified Product Summary
The products listed below have been thoroughly tested in Polycom’s lab using the VIEW Certification Test Plan. This document details how to configure the WS 2000 Wireless Switch and the AP 300 access point (AP) with SpectraLink Wireless Telephones. Certified Product Summary... -
Page 4: Known Limitations
Configuration Guide Known Limitations Voice quality may be impaired in an environment with heavy wireless TCP traffic, such as FTP data transfers. Access Point Capacity and Positioning Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony white paper. This document covers the security, coverage, capacity and QoS considerations necessary for ensuring excellent voice quality with enterprise Wi-Fi networks. -
Page 5: Network Topology
Motorola WS2000 with AP 300 Network Topology The following topology was used during VIEW Certification testing. PN: 1725-36066-001_D.doc... -
Page 6: Configuration Settings
For FTP, issue the following commands. admin> admin>system admin(system)>config admin(system.config)>set server 192.168.0.100 admin(system.config)>set fw file mf_02010100009R.bin admin(system.config)>set fw path /home/<user> admin(system.config)>set user <username> admin(system.config)>set passwd <password> admin(system.config)>update ftp s1 3. The WS 2000 Wireless Switch will reboot and load the firmware. PN: 1725-36066-001_D.doc... - Page 7 Motorola WS2000 with AP 300 Installing firmware through the Web interface 1. Open the WS 2000 applet by entering the IP address of the wireless switch: http://192.168.0.1 2. In the navigation pane, click . The Firmware Update Firmware Update page will appear.
-
Page 8: Configuring The Wireless Switch From The Default Configuration
Configuration Guide Configuring the Wireless Switch from the Default Configuration Radio settings: The SpectraLink Wireless Telephones use an 802.11b radio; therefore VIEW Certification testing was done with the 802.11b mode only and not the b/g mode. Commands Default Settings VIEW Tested Settings Beacon-interval 100 * DTIM-period... - Page 9 You can specify the desired channel manually by using the following command. admin(network.ap)>set reg 1 in 11 20 reg <access port index> <indoor/outdoor> Configuring radio settings through the Web interface 1. In the WS 2000 applet navigation pane, select AP1<index> [BG] 2. In the page, go to , and select from the 802.11 b/g mode...
- Page 10 Configuration Guide 6. In the WS 2000 applet navigation pane, select AP<index> [BG] 7. In the page, click the button. Beacon Settings 8. In the dialog box, set the Beacon Settings DTIM Period 3 Beacons 9. Click the button. 10. Click the button.
-
Page 11: Voice Prioritization Setting
Motorola WS2000 with AP 300 Voice Prioritization Setting 1. In the WS 2000 Wireless Switch, voice prioritization on a WLAN is enabled by default. should be set to Multicast Address 1 01:00:5E:00:01:74 SpectraLink multicast traffic. 3. Click the button Apply... -
Page 12: Ssid Settings
Configure the SSID settings of the wireless switch using the following commands. admin> admin>network admin(network)>wlan admin(network.wlan)>set ess 1 spectralink Configuring SSID settings through the Web interface 1. In the WS 2000 applet navigation pane, under , select Wireless WLAN1. 2. Configure the (e.g. ESSID spectralink 3. - Page 13 Motorola WS2000 with AP 300 PN: 1725-36066-001_D.doc...
-
Page 14: Security Settings
Configuration Guide Security Settings Enable WPA/WPA2 security mode. Configuring WPA/WPA2 TKIP through the CLI (when SpectraLink Wireless Telephones are configured for WPA- PSK) To configure WPA-TKIP (PSK) as security option, use the following commands admin>network admin(network)>wlan admin(network.wlan)>set enc 1 tkip admin(network.wlan)>set tkip phrase 1 12345678 admin(network.wlan)>save PN: 1725-36066-001_D.doc... - Page 15 Motorola WS2000 with AP 300 Configuring WPA/WPA2 TKIP through the Web interface (when SpectraLink Wireless Telephones are configured for WPA-PSK) 1. In the WS 2000 applet navigation pane, double-click , and WLAN1 then click WLAN1 Security 2. Click the option, and click the...
- Page 16 Configuration Guide 3. In the page, under , click the WPA/WPA2-TKIP Settings Key Settings option to enter the ASCII passphrase. ASCII passphrase 4. A warning dialog box will appear while you are trying to enter the key. Click Yes. 5. Enter the ASCII passphrase. This will configure the WPA-TKIP (PSK) mode.
- Page 17 1 ccmp admin(network.wlan)>set ccmp phrase 1 12345678 admin(network.wlan)>save Configuring WPA2-CCMP through the Web interface (when SpectraLink Wireless Telephones are configured for WPA2-PSK) 1. In the WS 2000 applet navigation pane, double-click , and WLAN1 then click . The page will appear.
- Page 18 Configuration Guide 3. In the dialog box, under , click the WPA2-CCMP Settings Key Settings option to enter the ASCII passphrase. ASCII passphrase 4. A warning dialog box will appear. Click 5. Enter the ASCII passphrase. Click the button. 6. Click the button.