Page 1
Trådlös växelverkande såg Oppladbar stempelsag Akkukäyttöinen pistosaha Model No: EY45A1 Before operating this unit, please read these instructions completely and save this manual for future use. Vor Inbetriebnahme des Gerätes die Betriebsanleitung bitte gründlich durchlesen und diese Broschüre zum späteren Nachschlagen sorgfältig aufbewahren.
I. INTENDED USE 10) Check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor, Thank you for purchasing the Panasonic workbench, etc. Reciprocating saw. This Reciprocating 11) Hold the tool fi rmly.
CAUTION • Panasonic is not responsible for any Be sure to remove the battery pack before damage or accident caused by the use performing the blade replacement proce-...
Button 3. Let go of the locking sleeve. • An integrated spring will return the sleeve to its position automatically, locking the reciprocating saw blade in place. • Grip the back of the reciprocating saw blade and pull it two or three times to IV.
Switch lock • Do not touch the jigsaw blade imme- diately after cutting. If this is not ob- A switch lock prevents the motor from served, burns may occur. starting if the switch is pulled inadvert- Holding the tool and pushing on it ently.
CAUTION • If the tool is subject to a sudden load during use that causes the motor to • Keep the protective shoe in contact lock up, the overdischarge prevention with the material being cut while op- sensor may be triggered, and the bat- erating the tool.
• The ambient temperature range is be- Battery Pack Life tween 0°C (32°F) and 40°C (104°F). If The rechargeable batteries have a the battery pack is used when the bat- limited life. If the operation time becomes tery temperature is below 0°C (32°F), extremely short after recharging, replace the tool may fail to function properly.
Page 8
Li-ion Battery Pack 8. If a fully charged battery pack is inserted into the charger again, the charging NOTE: lamp lights up. After several minutes, Your battery pack is not fully charged the charging lamp in green color will at the time of purchase. Be sure to turn off.
LAMP INDICATIONS Charging is completed. (Full charge.) Battery is approximately 80% charged. Now charging. Charger is plugged into the AC outlet. Ready to charge. Charging Status Lamp. (Green) (Orange) Left: green Right: orange will be displayed. Battery pack is cool. The battery pack is being charged slowly to reduce the load on the battery.
For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
VII. SPECIFICATIONS MAIN UNIT Model EY45A1 Motor 14.4 V DC 18 V DC Max thickness of mounting blade 1.6 mm Length of strokes 28 mm Strokes per minute 0 - 2250 min 0 - 2800 min Wood 235 mm Maximum cutting...
Page 12
A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UN- Fuse Cover SUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.