Page 1 Satellite /Satellite Pro L700 Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Customer Support Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong”...
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Customer Support Center within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 6 In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 9 Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Page 11 VCCI Class B Information Modem Warning Notice This information is only applicable if your computer has a modem. Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).
Page 12 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
Page 13: Device Authorization
FH: This equipment uses FH-SS modulation. The interference range of this equipment is less than 10m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 14: Radio Approvals For Wireless Devices
Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models. ® ® Approved Countries/Regions for the Intel Wireless Wi-Fi Link 5100/5300 Series This equipment is approved to the radio standard by the countries/regions in the following table.
Page 15 Malawi Malaysia Malta Martinique Mayotte Mexico Monaco Montenegro Montserrat Morocco Netherlands New Caledonia New Zealand Nicaragua Norway Oman Pakistan Panama Paraguay Peru Philippines Poland Portugal Puerto Rico Qatar Réunion Romania Russia Saint Martin Saipan San Marino Saudi Arabia Serbia Singapore Slovakia Slovenia South Africa...
Page 16 ® ® Approved Countries/Regions for the Atheros Wireless Wi-Fi Link AR5B95 Series This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Argentina CNC: Australia...
Page 17 Ukraine United Kingdom Uruguay Venezuela Vietnam Yemen Zimbabwe Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 18 Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community 5150-5250 MHz 5250-5350 MHz 5470-5725 MHz Countries Channels: 36, 40, 44, Channels: 52, 56, 60, Channels: 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Indoor Only Indoor Only Indoor/Outdoor...
Page 19 ® Approved Countries/Regions for the Realtek RTL8192E This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Argentina Australia Austria Azerbaijan Bahrain Bangladesh Belgium...
Page 20 ® Approved Countries/Regions for the Realtek RTL8191SE This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Argentina Australia Austria Azerbaijan Bahrain Bangladesh Belgium...
Page 21 ® Approved Countries/Regions for the Realtek RTL8188CE This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Argentina Aruba (Netherlands) Australia Austria Azerbaijan Bahrain...
Page 22 Uganda UAE (United Arab United Kingdom Emirates) Uruguay Venezuela Vietnam Zimbabwe ® Approved Countries/Regions for the Realtek RTL8187B This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 23: Bluetooth Wireless Technology Interoperability
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 24 Approved Countries/Regions for use (Bluetooth wireless technology) ® Bluetooth Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Argentina...
Page 25: Bluetooth Wireless Technology And Your Health
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 26: Regulatory Statements
Regulatory statements This product complies with any mandatory product specification in any country/ region where the product is sold. In addition, the product complies with the following: European Union (EU) and EFTA This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly.
Page 27: Optical Disc Drive Safety Instructions
(Sample shown below. Location of the label and manufacturing information may vary.) Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 28 EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL.
Page 29 Blu-ray and Blu-ray Disc are trademarks of the BD Association. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 30: Table Of Contents
Contents Introduction................37 This guide ...............39 Safety icons ............40 Other icons used..........40 Your computer’s features and specifications ..41 Other documentation ..........41 Service options ............41 Chapter 1: Getting Started............42 Selecting a place to work ........42 Setting up a work environment ......42 Keeping yourself comfortable ......43 Precautions............43 Important information on your computer’s...
Page 31: Contents
Contents Turning on the power ........50 Setting up your software........50 Registering your computer with Toshiba ....51 Adding optional external devices......51 Adding memory (optional) ........52 Installing a memory module ......52 Removing a memory module......59 Checking total memory ........62 Recovering the Internal Storage Drive ....62 Recovering to out-of-box state (recommended recovery method)....64...
Page 32 Contents Connecting a printer ..........88 Setting up a printer ...........89 Turning off the computer ........89 Options for turning off the computer ....90 Using the Shut down command......92 Using and configuring Hibernation mode ..94 Using and configuring Sleep mode ....97 Closing the display panel ........100 Customizing your computer’s settings....100 Caring for your computer........100 Cleaning the computer ........100...
Page 33: Contents
Recording optical media .........117 Removing a disc with the computer on...118 Removing a disc with the computer off ..118 Caring for optical discs ........119 Toshiba’s online resources ........119 Chapter 3: Mobile Computing..........120 Toshiba’s energy-saver design......120 Running the computer on battery power ....120 Battery Notice ..........121...
Page 34 Using an instant password......153 Using a supervisor password......154 Using a user password ........155 Deleting a user password........156 TOSHIBA Face Recognition Utility......157 TOSHIBA PC Diagnostic Tool Utility......158 Mouse Utility ............159 TOSHIBA Hardware Setup........160 TOSHIBA Sleep Utility ...........162 Starting the TOSHIBA Sleep Utility....162 USB Sleep and Charge ........162...
Page 35: Contents
Contents TOSHIBA eco Utility™ ...........166 TOSHIBA wireless LAN indicator ......167 TOSHIBA Service Station ........168 TOSHIBA PC Health Monitor .........168 Chapter 6: If Something Goes Wrong ........170 Problems that are easy to fix ........170 Problems when you turn on the computer....171 ®...
Page 36 Contents Appendix A: Hot Keys/TOSHIBA Cards........198 Hot Key Cards ............198 Using the Hot Key Cards .........199 Hot key functions ..........199 Volume Mute ..........200 Lock (Instant security) ........201 Power plan .............202 Sleep mode .............203 Hibernation mode ...........204 Output (Display switch) .........205 Display brightness ..........206...
Page 37: Introduction
You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to...
Page 38 (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 39: This Guide
Toshiba’s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Page 40: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 41: Your Computer's Features And Specifications
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page...
Page 42: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important safety information.
Page 43: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, included with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 44 Getting Started Selecting a place to work ❖ Avoid prolonged physical contact with the underside or surface of the computer. ❖ Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin. Read the “Avoid extended contact between computer base/palm rest and skin”...
Page 45: Important Information On Your Computer's Cooling Fan
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 46: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 47 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 48: Charging The Main Battery
Getting Started Charging the main battery ❖ Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply.
Page 49: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Facing the front of the computer, locate the center of the display panel.
Page 50: Turning On The Power
Getting Started Using the computer for the first time Turning on the power To turn on the computer: Make sure any external devices (such as the AC adaptor, if you plan to use AC power rather than battery power) are properly connected and ready.
Page 51: Registering Your Computer With Toshiba
Product registration can be completed by either visiting the Toshiba Web site at http://www.register.toshiba.com, or by clicking Start, All Programs, My Toshiba, and then Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty.
Page 52: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page Installing a memory module Memory modules can be installed in the memory module slots on the underside of the computer.
Page 53 Getting Started Adding memory (optional) The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Sleep or Hibernation mode, data will be lost.
Page 54 Getting Started Adding memory (optional) Remove the main battery. For information on removing the main battery, see “Removing the battery from the computer” on page 130. L730 series L740 series Memory module slot cover Front of computer L770 series L750 series Memory module slot cover Front of computer...
Page 55 Getting Started Adding memory (optional) Using a small Phillips screwdriver, loosen the captive screws that secure the memory module slot cover. Back of computer Back of computer L730 series L740 series Back of computer L770 series L750 series (Sample Illustration) Removing the memory module slot cover Remove the memory module slot cover.
Page 56 Getting Started Adding memory (optional) Locate an empty memory module slot on the underside of the computer. NOTE If no memory slot is available, you must remove a module by performing steps “Removing a memory module” on page NOTE If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module.
Page 57 Getting Started Adding memory (optional) Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket.
Page 58 Getting Started Adding memory (optional) Back of computer Slot B Slot A (Sample Illustration) Inserting the memory module into the slot NOTE For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A. Replace the memory module slot cover and secure it using the screws.
Page 59: Removing A Memory Module
Getting Started Adding memory (optional) Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module.
Page 60 Getting Started Adding memory (optional) NOTE The following screen may appear when you turn on the power: ® If “Start Windows Normally” is highlighted, then press Enter If one of the Safe Mode options is highlighted, it is best to press to go into Safe Mode, then shut down and restart the system, at Enter ®...
Page 61 Getting Started Adding memory (optional) Gently lift the memory module to a 30-degree angle and slide it out of the slot. Back of computer Slot B Slot A (Sample Illustration) Removing the memory module Replace the memory module slot cover and secure it using the screws.
Page 62: Checking Total Memory
Getting Started Recovering the Internal Storage Drive TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: ❖...
Page 63 AC adaptor. ❖ The Toshiba Recovery Wizard also provides the option of erasing your internal storage drive, without restoring the information on the drive. See “Erasing the Internal Storage Drive” on page 78 more information.
Page 64: Recovering To Out-Of-Box State (Recommended Recovery Method)
Make sure the computer is turned off. While powering on your computer, press the key when the initial TOSHIBA screen displays. The boot menu appears. Using the arrow keys to scroll down, select the HDD Recovery option, and then press the key.
Page 65 “Recovery of Factory Default Software with user’s data” option is selected in the next step. Click Yes to continue. (Sample Image) Warning screen When the Toshiba Recovery Wizard opens and the “Selecting a process” screen displays, select Recovery of Factory Default Software, and then click Next.
Page 66: Recovering Of Factory Default Software With User's Data
Using “Recovery of Factory Default Software with user’s data” recovers your internal storage drive to factory default state and attempts to save C:\Users data to C:\Backup. Toshiba does not guarantee successful data back-up. Please make a complete back up of your data to external media before executing the recovery. For more information, see “Backing up your work”...
Page 67 Make sure the computer is turned off. While powering on your computer, press the key when the initial TOSHIBA screen displays. The boot menu appears. Using the arrow keys to scroll down, select the HDD Recovery option, and then press the key.
Page 68 Wizard will “attempt” to save all data. There is a risk that the Toshiba Recovery Wizard may not be able to save all data during the recovery process. Toshiba does not guarantee successful data back up. Be sure to save your work to external media before executing the recovery (see “Backing up your work”...
Page 69: Recovering Without Changing The Internal Storage Drive Partitions
Getting Started Recovering the Internal Storage Drive When the recovery process is complete, the Recovery of Factory Default Software screen appears, indicating that the recovery process is complete. Click Finish to restart the computer. (Sample Image) Recovery of Factory Default Software - Recovery complete Recovering without changing the internal storage drive partitions Recovering without changing the internal storage drive partitions deletes all information stored on the C: drive.
Page 70 Make sure the computer is turned off. While powering on your computer, press the key when the initial TOSHIBA screen displays. The boot menu appears. Using the arrow keys to scroll down, select the HDD Recovery option, and then press the key.
Page 71 Getting Started Recovering the Internal Storage Drive When the Toshiba Recovery Wizard opens and the “Selecting a process” screen displays, select Recovery of Factory Default Software, and then click Next. (Sample Image) Selecting a process screen The Recovery of Factory Default Software screen appears.
Page 72: Recovering To A Custom Size Partition
Make sure the computer is turned off. While powering on your computer, press the key when the initial TOSHIBA screen displays. The boot menu appears. Using the arrow keys to scroll down, select the HDD Recovery option, and then press the key.
Page 73 “Recovery of Factory Default Software with user’s data” option is selected in the next step. Click Yes to continue. (Sample Image) Warning screen When the Toshiba Recovery Wizard opens and the “Selecting a process” screen displays, select Recovery of Factory Default Software, and then click Next.
Page 74: Creating Recovery Dvds/Media
Getting Started Recovering the Internal Storage Drive The Recovery of Factory Default Software screen appears. Select Recover to a custom size partition. (Sample Image) Recovery of Factory Default Software screen Use the on-screen arrow buttons in The size of drive C: field to set the partition size.
Page 75 Follow the procedure below to determine how much space you will need for storing your system’s recovery files. To create recovery DVDs/media: Click Start, All Programs, My Toshiba, and then Recovery Media Creator. The TOSHIBA Recovery Media Creator dialog box displays.
Page 76: Restoring From Recovery Dvds/Media
Click the Create button in the TOSHIBA Recovery Media Creator utility dialog box. Follow the on-screen prompts to complete the copy process.
Page 77 “Recovery of Factory Default Software with user’s data” option is selected. Click Yes to continue. When the Toshiba Recovery Wizard opens and the “Selecting a process” screen displays, select Recovery of Factory Default Software, and then click Next.
Page 78: Erasing The Internal Storage Drive
For more information, “Recovering the Internal Storage Drive” on page To delete all data and partitions from the internal storage drive: Access the Toshiba Recovery Wizard on your internal storage drive or on your recovery DVDs/media. ❖...
Page 79 DVD into your optical disc drive or connect the USB flash drive containing your recovery files to your computer, and then power on the computer. When the initial TOSHIBA screen displays, press . Using the arrow keys, select the DVD or USB Flash option on the...
Page 80: Checking The Internal Storage Drive Operating Status
Highlight the internal storage drive in the Volume list to display its status in the lower portion of the screen. Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer.
Page 81: Using The Touch Pad
Some of the following features may need to be enabled before they can be used. To enable the following features, click on the Mouse icon in the Optimize tab of Toshiba Assist. Click the Device Settings tab and then click Settings.
Page 82 Getting Started Using the touch pad Do the following: Example: Move the on-screen Slide your finger across the touch pad in the direction you want to move the pointer. pointer To move the pointer a longer distance, slide your finger several times across the touch pad in the preferred direction.
Page 83 Getting Started Using the touch pad Do the following: Example: Scroll horizontally Slide your finger along the bottom edge of the touch pad in the direction you want to scroll. Repeat to scroll a longer distance. (Sample Illustration) Horizontal scrolling active area Scroll continuously Begin scrolling vertically or horizontally...
Page 84: Adjusting Touch Pad Settings
Mouse Properties option of the Windows Control Panel. For more information, please visit www.support.toshiba.com, and enter the phrase “Mouse pointer jumps around as you type” into the Search field. Disabling or enabling the touch pad The touch pad is enabled by default.
Page 85: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in display, but you can also connect the following types of external display devices to the video ports described below: ❖ An HDMI™-compatible television or external display device via the HDMI™...
Page 86: Connecting An External Monitor Or Projector
Getting Started Using external display devices Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: Read the directions that came with the monitor to see if you first need to install new software.
Page 87: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard ❖ Built-in display and TV (or other external video device) ❖ TV (or other external video device) ❖ External monitor and TV ❖ Built-in display and external monitor (extended mode) ❖ Built-in display and TV (extended mode) ❖...
Page 88: Connecting A Printer
Getting Started Connecting a printer Connecting a printer NOTE Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 89: Setting Up A Printer
Getting Started Turning off the computer Setting up a printer NOTE Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up for the first time.
Page 90: Options For Turning Off The Computer
Getting Started Turning off the computer Options for turning off the computer Depending on the operating system installed, you have more than one option available for turning off the computer: Shut down, Hibernate, and Sleep. Each option has its advantages. ❖...
Page 91 Getting Started Turning off the computer ❖ When starting up again, the computer returns to the state in which you left it, including all open programs and files you were using. For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode”...
Page 92: Using The Shut Down Command
Getting Started Turning off the computer Using the Shut down command The Shut down command completely shuts down the computer without saving your work or the current state of the computer. This command closes all open programs, shuts down the operating system, and then turns off your computer.
Page 93 Getting Started Turning off the computer Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. (Sample Image) Edit Plan Settings screen Click Change advanced power settings. The Advanced settings tab of the Power Options window appears.
Page 94: Using And Configuring Hibernation Mode
Getting Started Turning off the computer NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. ❖ Lid close action Set this option to Shut down if you want the computer to shut down when you close the display panel.
Page 95 Getting Started Turning off the computer Click Hibernate in the pop-up menu. The computer saves the state of all open programs and files, turns off the display, and then turns off. Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power button or closing the display panel.
Page 96 Getting Started Turning off the computer Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select Hibernate for the options you want. NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power.
Page 97: Using And Configuring Sleep Mode
Getting Started Turning off the computer Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Page 98 Getting Started Turning off the computer Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. (Sample Image) Edit Plan Settings screen To change the amount of time after which the computer enters Sleep mode: ❖...
Page 99 Getting Started Turning off the computer Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select Sleep for the options you want. NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power.
Page 100: Closing The Display Panel
Getting Started Customizing your computer’s settings Starting again from Sleep mode To start up the computer from Sleep mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using. If you place the computer in Sleep mode by closing the display panel, you can start it again by opening the display panel.
Page 101: Moving The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 102: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 103: Using The Keyboard
Learning the Basics Using the keyboard ❖ Use Error-checking and Disk Defragmenter regularly to check and optimize disk space and improve performance. ❖ Scan all new files for viruses. This precaution is especially important for files you receive via external media, email, or download from the Internet. ❖...
Page 104: Character Keys
Learning the Basics Using the keyboard NOTE L750, L770 series keyboards To capture a print screen of the entire screen, press the key. Fn + PRTSC To capture only the active window displayed, press while Fn + ALT simultaneously pressing the key.
Page 105: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys , and keys do different things depending on the Ctrl program you are using. For more information, see your program documentation. Function keys The function keys (not to be confused with the key) are the 12 keys at the top of the keyboard.
Page 106: Overlay Keys
Learning the Basics Using the keyboard Overlay keys NOTE This section applies to the L730/L740 series. The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard.
Page 107: Starting A Program
Learning the Basics Starting a program Using the overlay for cursor control NOTE This section applies to the L730/L740 series. The keys with the gray arrows and symbols on their left front are the cursor control overlay keys. To turn the cursor control overlay on, press simultaneously.
Page 108: Starting A Program From Windows Explorer
Learning the Basics Starting a program Click the program group, in this example, Accessories. The Accessories menu is displayed. Click the program, in this example, WordPad. WordPad opens. To close the program, click the Close button in the upper-right corner of the program’s window. ®...
Page 109: Starting A Program Using The Search Programs And Files Field
Learning the Basics Saving your work Starting a program using the Search programs and files field This example uses the Start menu’s Search programs and files field to start WordPad: Click Start to display the Start menu. The Search programs and files field appears at the bottom of the Start menu.
Page 110 Learning the Basics Saving your work Saving files Click on the arrow in the upper-left corner of your ® Windows -based application to display the drop-down menu, and then click Save. If you are working with a document that already has a file name, this is all you need to do.
Page 111: Printing Your Work
Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For ® example, Microsoft Word saves files with a .doc/.docx extension. Any file name with an extension of “.doc/.docx”...
Page 112: Backing Up Your Work
Learning the Basics Backing up your work Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your work Back up all the files you create in case something happens to your computer.
Page 113: Using The Optical Disc Drive
Learning the Basics Using the optical disc drive TECHNICAL NOTE: When restoring files, the backup program prompts you if you try to overwrite a file that already exists on the internal storage drive. Make sure the backup version is the one you want before overwriting the existing file.
Page 114 Learning the Basics Using the optical disc drive ❖ Some Blu-ray Disc™ movies have online content that can be accessed from the disc. To view this content, your computer must be connected to the Internet. ❖ While viewing online content, your system may not view it in High Definition on an external monitor, even though your display setting is set to simultaneous.
Page 115: Optical Disc Drive Components
Learning the Basics Using the optical disc drive Optical disc drive components The optical disc drive is located on the side of the computer. Your optical disc drive may look like this: Drive in-use indicator light Eject button Manual eject hole (Sample Illustration) Optical disc drive Drive in-use indicator light—Indicates when the drive is in use.
Page 116 Learning the Basics Using the optical disc drive Grasp the tray and pull it fully open. (Sample Illustration) Drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for optical discs”...
Page 117: Playing An Audio Cd
Using the optical disc drive If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 118: Removing A Disc With The Computer On
Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical disc drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders.
Page 119: Caring For Optical Discs
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 120: Chapter 3: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 121: Battery Notice
This is normal for all batteries. To purchase a new battery pack, see the accessories information included with your computer or visit the Toshiba Web site at accessories.toshiba.com. Use only batteries designed to work with your Toshiba computer.
Page 122: Power Management
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 123: Charging The Main Battery
Mobile Computing Charging batteries Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: The recharging of the battery cannot occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices.
Page 124: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours. NOTE It is seldom necessary to charge the RTC battery because it charges while the computer is on.
Page 125: Determining Remaining Battery Power
Mobile Computing Monitoring main battery power HINT: Be careful not to confuse the battery light ( ) with the ON/OFF light ( When the ON/OFF light flashes amber, it indicates that the system is ® suspended (using the Windows operating system Sleep command). L730 series L740/L750/L770 series System indicator lights...
Page 126: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 127: Conserving Battery Power
Mobile Computing Monitoring main battery power Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. Double-click Battery to display the battery options. (Sample Image) Advanced settings tab of Power Options screen Configure the alarm settings to suit your needs. Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as:...
Page 128: Power Plans
Mobile Computing Monitoring main battery power ® Microsoft has combined these options into preset Power Plans. Using one of these power plans lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs. The following sections describe how to choose a Power Plan and discuss each power-saving option.
Page 129: Using A Hot Key To Set The Power Plan
Mobile Computing Monitoring main battery power Click Change advanced power settings to access settings for battery notification levels, internal storage drive power save time, etc. You can click on the plus signs to expand each item and to see what settings are available for each item. Click OK to save the plan changes you have performed.
Page 130: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 131 Mobile Computing Changing the main battery Slide the battery release lock to the unlocked position. L740 series L730 series L750 series L770 series (Sample Illustration) Unlocking the battery release lock Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. L740 series L730 series L750 series...
Page 132: Inserting A Charged Battery
Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations.
Page 133: Taking Care Of Your Battery
Mobile Computing Taking care of your battery Slide the battery release lock to the locked position. L740 series L730 series L750 series L770 series (Sample Illustration) Locking the battery release lock Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer”...
Page 134: Maintaining Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 135: Disposing Of Used Batteries
If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. In addition, Toshiba’s recycling initiatives include recycling programs, events and consumer promotions. For details, please visit...
Page 136: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs.
Page 137: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows operating system. You can use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 138: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, notification area, and background pattern. Icons Start button Taskbar Notification area ® (Sample Image) Windows operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 139 Exploring Your Computer’s Features Exploring the desktop ❖ TECHNICAL NOTE: If you delete a large number of files or very large files from the internal storage drive, there may be insufficient space available in the Recycle Bin to hold these files. ®...
Page 140: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 141: Connecting Your Computer To A Network
Ask your network administrator for the telephone number of the network. ❖ Click on the TOSHIBA wireless LAN indicator icon (available on certain models) on the upper right side of the logon screen to view the networks you are currently connected to. For more information, see “TOSHIBA wireless LAN indicator”...
Page 142: Exploring Audio Features
Exploring Your Computer’s Features Exploring audio features Exploring audio features You can use your computer to record sounds using the computer’s internal microphone (available on certain models) or an optional external microphone. You can listen to sound files or audio CDs using the built-in speakers, headphones, or external speakers.
Page 143: Using The Web Camera
The Web Camera software, by default, should already be running. The Web Camera indicator light glows when the Web Camera is active. For more information on the software, click Start, All Programs, TOSHIBA, Utilities, and then Web Camera Application Help.
Page 144: Using The Memory Card Reader
Exploring Your Computer’s Features Using the Memory card reader Using the Memory card reader (Available on certain models.) ® The Memory card reader supports the use of Memory Stick Memory Stick PRO™, Memory Stick PRO Duo™, Secure ® ® Digital™ (SD™), or MMC (MultiMediaCard ) media.
Page 145: Removing Memory Media
Exploring Your Computer’s Features Using the Memory card reader When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data. Removing memory media Prepare the card for removal by clicking on the Show hidden icons button ( ), if necessary, in the notification area and then selecting the Safely Remove Hardware and Eject Media icon.
Page 146: Chapter 5: Utilities
❖ TOSHIBA Assist ❖ TOSHIBA Application Installer ❖ Supervisor password ❖ User password ❖ TOSHIBA Face Recognition Utility ❖ TOSHIBA PC Diagnostic Tool Utility ❖ Mouse Utility ❖ TOSHIBA Hardware Setup ❖ TOSHIBA Sleep Utility ❖ TOSHIBA Accessibility...
Page 147: Toshiba Assist
❖ TOSHIBA PC Health Monitor TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist.
Page 148: Connect
Utilities TOSHIBA Assist Connect The feature available in this category is: ❖ ® Bluetooth Settings (Sample Image) TOSHIBA Assist window – Connect tab...
Page 149: Secure
Utilities TOSHIBA Assist Secure The features available in this category are: ❖ Supervisor password ❖ User password (Sample Image) TOSHIBA Assist window – Secure tab...
Page 150: Protect & Fix
Utilities TOSHIBA Assist Protect & Fix The feature available in this category is: ❖ TOSHIBA PC Diagnostic Tool Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 151: Optimize
The features available in this category are: ❖ Mouse Utility ❖ TOSHIBA Hardware Setup (Hardware Settings) ❖ TOSHIBA Accessibility ❖ TOSHIBA Face Recognition Utility ❖ TOSHIBA Sleep Utility ❖ TOSHIBA eco Utility™ (Sample Image) TOSHIBA Assist window – Optimize tab...
Page 152: Toshiba Application Installer
Utilities TOSHIBA Application Installer TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, My Toshiba, and then TOSHIBA Application Installer.
Page 153: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. TOSHIBA supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and files when leaving the computer temporarily.
Page 154: Using A Supervisor Password
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 155: Using A User Password
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your...
Page 156: Deleting A User Password
Utilities Setting passwords To register a password for the power-on password functions: Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab. Click the User Password icon.
Page 157: Toshiba Face Recognition Utility
TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the face...
Page 158: Toshiba Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. NOTE The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem. To use the TOSHIBA PC Diagnostic Tool utility:...
Page 159: Mouse Utility
Click Start, Control Panel, Hardware and Sound, and then under Devices and Printers, click Mouse, or click the Mouse icon in the Optimize tab of TOSHIBA Assist. The Mouse Properties screen appears. The settings you can change are divided into these categories: ❖...
Page 160: Toshiba Hardware Setup
Windows operating system. To access it: ❖ Click Start, All Programs, TOSHIBA, Utilities, and then HWSetup, or click the TOSHIBA Hardware Settings icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA HWSetup screen appears.
Page 161 Utilities TOSHIBA Hardware Setup ❖ Display—Allows you to change various default settings for the built-in display NOTE When the computer restarts, it remembers the last configuration. If data does not appear on the display you are using after starting in Sleep mode, press .
Page 162: Toshiba Sleep Utility
“USB Sleep and Charge function.” It also displays the remaining battery capacity. Starting the TOSHIBA Sleep Utility To start this utility, click Start, All Programs, TOSHIBA, Utilities, and then USB Sleep and Charge. USB Sleep and Charge Your computer can supply USB bus power (DC 5V) to the USB port even when the computer is in Sleep mode, Hibernation mode or shutdown state (powered off).
Page 163 Utilities TOSHIBA Sleep Utility NOTE ❖ When “USB Sleep and Charge function” is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports.
Page 164: Enabling/Disabling Usb Sleep And Charge
If your device does not charge in Typical Mode, try using Alternate Mode. To select a different charging mode, use the Power supply mode drop-down list in the utility. (Sample Image) TOSHIBA Sleep Utility screen...
Page 165: Toshiba Accessibility
USB Sleep and Charge in the utility and turn the computer on to charge the device, or use a different charging device. TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 166: Toshiba Eco Utility
The TOSHIBA eco Utility™ monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To access the TOSHIBA eco Utility™, do one of the following: ❖ Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA eco Utility.
Page 167: Toshiba Wireless Lan Indicator
TOSHIBA wireless LAN indicator TOSHIBA wireless LAN indicator (Available on certain models.) The TOSHIBA wireless LAN indicator allows you to view the networks you are currently connected to. To access the list of connected networks, before logging in, click on the TOSHIBA wireless LAN indicator icon located on the upper right side of the logon screen.
Page 168: Toshiba Service Station
This information is used to identify and provide a notification of system conditions that may affect the performance of your TOSHIBA computer. It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA's authorized service providers.
Page 169 Utilities TOSHIBA PC Health Monitor You may disable the TOSHIBA PC Health Monitor at any time by ® uninstalling the software via the Windows Control Panel. Doing so will automatically delete all collected information from the internal storage drive. The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its standard limited warranty in any way.
Page 170: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 171: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 172 If Something Goes Wrong Problems when you turn on the computer The computer displays the WARNING RESUME FAILURE/Windows Error message. Recovery – Windows did not shut down successfully To continue, select Start Windows normally. This can happen if the computer was put into Sleep mode and the battery has discharged.
Page 173: The Windows
The output specifications of the AC adaptor must match the input specifications of the computer. If the specifications do not match, locate and use the AC adaptor that shipped with your computer. If the specifications do match, contact Toshiba. See “Contacting Toshiba” on page 195.
Page 174: Using Startup Options To Fix Problems
If Something Goes Wrong ® The Windows operating system is not working ❖ The operating system responds differently from the normal routine. ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device.
Page 175: Internet Problems
Click one of the options listed in the window and then follow the on-screen instructions. You can connect to Support Online by clicking the Ask button and then clicking Microsoft Customer Support or by going to Toshiba support at pcsupport.toshiba.com.
Page 176: Fixing A Problem With Device Manager
If Something Goes Wrong Fixing a problem with Device Manager Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable.
Page 177: Memory Problems
If Something Goes Wrong Memory problems Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be hardware or even software related. It is worthwhile checking for these first: Click Start, and then click the Shut down button in the lower-right corner of the Start menu.
Page 178 After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com.
Page 179: Keyboard Problems
If Something Goes Wrong Keyboard problems Keyboard problems NOTE L750/L770 series keyboard To capture a print screen of the entire screen, press the key. Fn + PRTSC To capture only the active window displayed, press while Fn + ALT simultaneously pressing the key.
Page 180 If Something Goes Wrong Display problems simultaneously again to return the display priority to its previous setting. HINT: Holding the key and pressing the key several times will advance you through the display options. If you are using an external monitor: ❖...
Page 181: Disk Or Storage Drive Problems
If Something Goes Wrong Disk or storage drive problems The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 182: Optical Disc Drive Problems
If Something Goes Wrong Optical disc drive problems Click the Tools tab. Click the Check now... button. The Check Disk box appears. You can choose one or both options: ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors Click Start.
Page 183 For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at pcsupport.toshiba.com. If the problem is with an optical data disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 184 ❖ Blu-ray Disc™ player does not support DVD playback. Please ® use Windows Media player or "TOSHIBA DVD Player" for DVD playback. ❖ Blu-ray Disc™ playback feature support may vary with each Blu-ray Disc™. Please contact content publisher directly with any questions.
Page 185: Sound System Problems
If Something Goes Wrong Sound system problems Sound system problems No sound is coming from the computer’s speakers. Adjust the volume control. Try pressing to see if volume mute is disabled. Fn + Esc Check that the volume control on the computer is turned up. If you are using external headphones or speakers, check that they are securely connected to your computer.
Page 186: Wireless Networking Problems
If Something Goes Wrong Wireless networking problems The printer will not print what you see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode. This mode lets you see your work exactly as it will print.
Page 187 If Something Goes Wrong Wireless networking problems NOTE To enable or disable wireless communication, use the Hot Key . For more information see “Hot Keys/TOSHIBA Cards” on Fn + F8 page 198. ❖ Use IPCONFIG to verify that the computer has a useful IP...
Page 188: Dvd And Blu-Ray Disc™ Operating Problems
Device Manager to view the optical disc drive properties. Check the Toshiba Web site for new information on optical disc drives and their operation. A blank screen appears while watching a DVD-ROM or BD-ROM movie or title.
Page 189: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Select None from the Screen saver drop-down list. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 190: Data And System Configuration Backup In The Windows Operating System
If Something Goes Wrong Develop good computing habits ® Data and system configuration backup in the Windows operating system ® The Windows operating system offers some easy-to-use features ® for backing up your Windows settings and your data documents and other important files. Take advantage of these features to protect yourself from much more difficult and time-consuming restoration procedures, and to safeguard your valuable data from loss.
Page 191 An external hard drive is recommended in case the internal storage drive fails. No additional software is required. Most of the optical disc drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from optical discs.
Page 192 If Something Goes Wrong Develop good computing habits Follow these steps to back up your computer or files to optical discs, or a storage drive: NOTE You cannot back up the computer while running on battery power. Connect the AC adaptor before continuing. Prepare your backup target by connecting it and/or inserting a blank optical disc in the drive.
Page 193 If you are attempting to charge a device without an AC adaptor connected to the computer, the computer's battery power may be below the limit specified in the TOSHIBA Sleep Utility or the battery may be depleted. Lower the limit in the TOSHIBA...
Page 194: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your operating system documentation.
Page 195: Contacting Toshiba
Toshiba’s Technical Support Web site For technical support, or to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. Toshiba voice contact Before calling Toshiba, make sure you have: ❖...
Page 196: Toshiba's Worldwide Offices
20041, Agrate Brianza Japan Milano, Italy Latin America and Caribbean Mexico Toshiba America Information Toshiba de México S.A. de C.V. Systems Sierra Candela No.111, 6to. Piso 9740 Irvine Blvd. Col. Lomas de Chapultepec. Irvine, California 92618 CP 11000 Mexico, DF.
Page 197 Spain United States The Rest of Europe Toshiba America Information Toshiba Europe (I.E.) GmbH Systems, Inc. Hammfelddamm 8 9740 Irvine Boulevard D-4-1460 Neuss Irvine, California 92618 Germany United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.
Page 198: Appendix A: Hot Keys/Toshiba Cards
Appendix A Hot Keys/TOSHIBA Cards Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. Hot Key Cards The Hot Key Cards are used to set or modify the following system functions: ❖...
Page 199: Using The Hot Key Cards
To use the Hot Key Cards: Press and hold the key. The TOSHIBA Cards appear along the top of the screen. (Sample Image) Hot Key Card display Select the desired option. The selected Card is displayed full-size with its available options below it.
Page 200: Volume Mute
Hot Keys/TOSHIBA Cards Hot key functions Volume Mute This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. Selecting this Card or pressing the hot key displays the...
Page 201: Lock (Instant Security)
Hot Keys/TOSHIBA Cards Hot key functions Lock (Instant security) This TOSHIBA Card or hot key blanks the display. Selecting this Card or pressing the hot key displays the following options: Fn + (Sample Image) Security options ❖ To enable lock, select ❖...
Page 202: Power Plan
Hot Keys/TOSHIBA Cards Hot key functions Power plan This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options window.
Page 203: Sleep Mode
Hot Keys/TOSHIBA Cards Hot key functions Sleep mode This TOSHIBA Card or hot key places the computer into Sleep mode. For more information about Sleep mode, please see “Using and configuring Sleep mode” on page Selecting this Card or pressing the hot key displays the...
Page 204: Hibernation Mode
Hot Keys/TOSHIBA Cards Hot key functions Hibernation mode This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page...
Page 205: Output (Display Switch)
Hot Keys/TOSHIBA Cards Hot key functions Output (Display switch) This TOSHIBA Card or hot key cycles through the power-on display options (only the first option is available when you do not have an external monitor attached) (the last option is available only if you are in Extended Display Mode).
Page 206: Display Brightness
Built-in Display and TV). In extended desktop mode, the image is split into two sides, one side per display device. To swap sides, select Swap Image Display. Display brightness This TOSHIBA Card decreases or increases the screen brightness. This hot key decreases the screen brightness. Fn + This hot key increases the screen brightness.
Page 207: Disabling Or Enabling Wireless Devices
Hot Keys/TOSHIBA Cards Hot key functions Disabling or enabling wireless devices This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: ❖ ® ® Wi-Fi enabled—Enables just the Wi-Fi module. ❖...
Page 208: Disabling Or Enabling The Touch Pad
Hot Keys/TOSHIBA Cards Hot key functions Disabling or enabling the touch pad This TOSHIBA Card or hot key enables/disables the touch pad. For more information on using the touch pad, see “Using the touch pad” on page Selecting this Card or pressing the hot key displays the...
Page 209: Zoom (Display Resolution)
Hot Keys/TOSHIBA Cards Hot key functions Zoom (Display resolution) This TOSHIBA Card or hot key switches screen resolution. Selecting this Card or pressing the hot key displays the following options: Fn + [Space bar] (Sample Image) Screen resolution options Cycle through the screen resolutions, then select the desired...
Page 210: Keyboard Hot Key Functions
Hot Keys/TOSHIBA Cards Hot key functions Keyboard hot key functions Fn + This hot key turns the cursor control overlay on and off. Fn + This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off.
Page 211: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. Canada UL approved CSA approved United Kingdom Europe VDA approved...
Page 212: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this User’s Guide. Alternating Current BIOS Basic Input/Output System BD-ROM Blu-ray Disc Read-Only Memory bits per second Compact Disc CD-ROM Compact Disc Read-Only Memory...
Page 213 Glossary DIMM Dual Inline Memory Module Disk Operating System Dots Per Inch Digital Versatile (or Video) Disc DVD-ROM Digital Versatile (or Video) Disc Read-Only Memory EPROM Erasable Programmable Read-Only Memory eSATA external Serial Advanced Technology Attachment File Allocation Table Federal Communications Commission gigabyte Hard Disk Drive HDMI...
Page 214 Glossary Read-Only Memory Real-Time Clock Secure Digital SDRAM Synchronous Dynamic Random Access Memory Solid State Drive Thin Film Transistor Universal Serial Bus Uniform Resource Locator Wide Area Network World Wide Web Terms The following terms may appear in this User’s Guide. active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology.
Page 215 Glossary backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. Basic Input/Output System (BIOS)—See BIOS. baud rate—The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second).
Page 216 Glossary cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD—An individual compact disc. See also CD-ROM. CD-ROM (Compact Disc Read-Only Memory)—A form of high- capacity storage that uses laser optics instead of magnetic means for reading data.
Page 217 Glossary CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor—An on-screen symbol (usually a flashing vertical line) that indicates the position where characters will appear when you enter data.
Page 218 Glossary document—Any file created with an application and, if saved to disk, given a name by which it can be retrieved. See also file. double-click—To press and release the pointing device’s primary button ® rapidly twice without moving the pointing device. In the Windows operating system, this refers to the pointing device’s left button, unless otherwise stated.
Page 219 Glossary file—A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. File Allocation Table (FAT)—The section of a storage drive that keeps track of the location of stored files.
Page 220 HDMI cables. See also HDMI. Hibernation—A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 221 Glossary LAN (Local Area Network)—A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network. LED (Light Emitting Diode)—A solid state lamp (SSL) that uses light-emitting diodes (LEDs) as the source of light, which offers long life and high efficiency output.
Page 222 Glossary motherboard—The computer’s main circuit board that contains the processor, memory, and other primary components. MS-DOS prompt—See system prompt. multi-function drive—A DVD drive that can read and write to CD and DVD media. multimedia—A combination of two or more media, such as sound, animation, and video in a computer program or presentation.
Page 223 Glossary password—A unique string of characters entered by a user to verify his or her identity to the computer or the network. PC Card—A credit-card-sized expansion card designed to increase the capabilities of computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter.
Page 224 Glossary Random Access Memory—See RAM. Read-Only Memory—See ROM. reboot—See boot, restart. removable disk—A disk that can be removed from a disk drive. A Flash drive is one example of a removable disk. resolution—A measure of the sharpness of the images that can be produced by a printer or displayed on a screen.
Page 225 Glossary shortcut—See keyboard shortcut. ® Sleep—A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. software—See program.
Page 226 Glossary Web—See World Wide Web. ® Wi-Fi —A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www)—The worldwide network of Web sites linked together over the Internet.
Page 227: Index
Index charge time 122 charger 122 AC adaptor 46 charging 48 AC power 122 charging the real-time clock AC power light 46 (RTC) 123 accessing conserving power 127 network 141 determine remaining power 125 adding disposal 135 memory indicator light 125 check total memory 62 installation 130 memory (optional) 52...
Page 228 133 Hibernation mode 94 battery indicator light 125 Hibernation mode options 95 BIOS Setup Sleep mode 97 see TOSHIBA Hardware Setup Sleep mode options 97 Blu-ray Disc™ connecting using 113 AC adaptor 46 button AC adaptor cord to (DC-IN) 47...
Page 229 Index display output settings 86 using a file extension 111 display panel function keys 105 opening 49 display, external headphones adjusting 87 using 142 disposal information 29 Help and Support disposing of used batteries 135 troubleshooting 175 Hibernation mode 90 caring for discs 119 configuring 94 removing with computer off 118...
Page 230 AC adaptor light 124 wireless 140 AC power light 46 notification area 140 battery light 47 ON/OFF light 50 ON/OFF indicator light 125 Web Camera light 143 online resources Licenses 29 Toshiba 119 lock optical disc computer, using 101 Auto-Run feature 117...
Page 231 USB-compatible 88 adding 51 printing a file 111 other documentation 41 problem solving contacting Toshiba 195 Startup options 174 password program, starting 107 deleting a supervisor 155 program, starting from Start menu 107 deleting a user 156...
Page 232 Index checking internal storage drive Search programs and files field operating status 80 starting a program 109 creating recovery DVDs/media selecting a place to work 42 erasing internal storage drive 78 power plan options 128 installing drivers and applications video cables 85 setting internal storage drive 62 low battery notifications 126...
Page 233 TOSHIBA Face Recognition Utility starting a program 107 Search programs and files field TOSHIBA Hardware Setup 160 TOSHIBA PC Diagnostic Tool Utility Windows® Explorer 108 Windows® Start menu 107 TOSHIBA PC Health Monitor 168 starting a program from Start 107...
Page 234 Index installing hardware/software 192 user password, deleting 156 keyboard 179 user password, setting 155 keyboard will not respond 171 using memory problems 177 a microphone 142 missing files/trouble accessing a computer lock 101 drive 181 DVDs 113 online content, Blu-ray Disc™ external display devices 85 Hibernation mode 94 on-screen eject button 183...

This manual is also suitable for:

Satellite series Satellite pro l700 series

Toshiba SatellitePro L700 Series User Manual

Contents

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys/Toshiba Cards

Appendix B: Power Cord/Cable Connectors

Quick Links

Related Manuals for Toshiba SatellitePro L700 Series

Summary of Contents for Toshiba SatellitePro L700 Series