hit counter script
Hitachi CP-TW2503 User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-TW2503
  6. User manual
Hitachi CP-TW2503 User Manual

Hitachi CP-TW2503 User Manual

Hide thumbs Also See for CP-TW2503:
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
CP-TW2503/CP-TW3003
User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.
WARNING
product. Be sure to read "Safety Guide" first. After reading them, store them in a
safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
CAUTION
NOTICE
NOTE
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
►Before using this product, please read all manuals for this
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-TW2503

Summary of Contents for Hitachi CP-TW2503

  • Page 1: Operating Guide

    Projector CP-TW2503/CP-TW3003 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” first. After reading them, store them in a safe place for future reference.

  • Page 2: Table Of Contents

    Contents   Introduction . . . . . . . . . . . . . . . 3 INPUT menu . . . . . . . . . . . . . . 47 Features .

  • Page 3: Introduction

    ü The HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen. ü Has HDCR and ACCENTUALIZER features which are Hitachi's original image stabilizer for a clearer image. ü Has DICOM ®...

  • Page 4: Part Names

    Introduction Part names HOT! Projector (1) Lamp cover (125) (11) The lamp unit is inside. (2) Control panel (5) (3) Elevator feet (x 2) (30) (13) (4) Remote sensor (x 2)(21) (5) projection window (129) (12) (6) Intake vents (7) Filter cover (127) The air filter and intake vent (15) are inside.
  • Page 5 Introduction Part names (continued) Control panel (1) STANDBY/ON button (24) (2) INPUT button (28) (3) POWER indicator (24, 134) (4) TEMP indicator (134) (5) LAMP indicator (134) Buttons ◄/►/▲/▼ (6) FOCUS +/- buttons when no menu is displayed (31), or Cursor ◄/►...
  • Page 6 Introduction Part names (continued) Ports (12 ~ 17) (1) USB TYPE A port (x2) (9) COMPUTER IN1 port (2) LAN port (10) COMPUTER IN2 / MONITOR OUT port (3) USB TYPE B port (11) VIDEO IN port (4) HDMI port (x2) (12) CONTROL port (5) MIC port (13) Option port *...
  • Page 7 Introduction Part names (continued) Remote control (1) INPUT button (28) (2) IWB button (29) (3) CALIBRATION button (29) INPUT CALIBRATION (4) STANDBY/ON button (24) ASPECT AUTO ACCENTUALIZER HDCR (10) (11) (5) ASPECT button (28) FOCUS D-ZOOM (12) (6) AUTO button (31) PAGE VOLUME MAGNIFY...

  • Page 8: Interactive Pen

    Introduction Part names (continued) Interactive pen (1) Pen tip (23) (2) Battery cover (23) NOTE • Interactive Pen is henceforth denoted as "pen".

  • Page 9: Setting Up

    Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to table T-1 and figures F-1 and F-2 at the end of User’s Manual (concise) to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen.
  • Page 10 Setting up Arrangement (continued) WARNING ►Place the projector in a cool place, and ensure that there is sufficient ventilation. The high temperature of the projector could cause fire, burns and/or malfunction of the projector. • Do not stop-up, block or otherwise cover the projector's vents. •...
  • Page 11 Setting up Arrangement (continued) CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. Also do not use an ultrasonic humidifier near the projector.

  • Page 12: Connecting With Your Devices

    Setting up Connecting with your devices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged.
  • Page 13 Setting up Connecting with your devices (continued) About Plug-and-Play capability • Plug-and-Play is a system composed of a computer, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and-Play can be used by connecting this projector to a computer that is VESA DDC (display data channel) compatible.
  • Page 14 Setting up Connecting with your devices (continued) NOTE • Before connecting the projector to a computer, consult the computer’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector. - Some signal may need an adapter to input this projector. - Some computers have multiple screen display modes that may include some signals which are not supported by this projector.
  • Page 15 Setting up Connecting with your devices (continued) • If you insert a USB storage device, such as a USB memory, into the USB TYPE A port and select the port as the input source, you can view images stored in the device (106).
  • Page 16 Setting up Connecting with your devices (continued) To use network functions of the projector, connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function, also connect the CONTROL port and an RS-232C port of the external device to communicate as a network terminal.
  • Page 17 Setting up Connecting with your devices (continued) NOTE • If an oversized USB storage device blocks the LAN port, use a USB extension cable to connect the USB storage device. • The HDMI port of this model is compatible with HDCP (High-bandwidth Digital Content Protection) and therefore capable of displaying a video signal from HDCP compatible DVD players or the like.

  • Page 18: Connecting To A Power Supply

    Setting up Connecting to a power supply Put the connector of the power cord into the AC (AC inlet) of the projector. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.

  • Page 19: Using The Cable Cover

    Setting up Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts. Connect the signal cables and the power cord to the projector first. Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure.

  • Page 20: Remote Control

    Remove the battery cover. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control.

  • Page 21: About The Remote Control Signal

    Remote control Remote About the remote control signal sensor The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees to the left and right of the sensor) within 3 meters about.
  • Page 22 Remote control Using as a simple PC mouse & keyboard The accessory remote control works as a simple mouse and keyboard of the computer, when the projector’s USB TYPE B port and the computer’s type A USB port are connected. (1) PAGE UP key: Press the PAGE UP button.

  • Page 23: Interactive Pen

    2. As illustrated in the diagram, insert the AAA battery into the battery cover with the - end facing the front. (HITACHI MAXELL, Part No. LR03) 3. Attach the battery cover by turning it to the right until it is completely closed.

  • Page 24: Power On/Off

    Power on/off Power on/off Turning on the power STANDBY/ON button Make sure that the power cord is firmly POWER indicator and correctly connected to the projector and the outlet. Make sure that the POWER indicator is steady orange (134). Press the STANDBY/ON button on the projector or the remote control.
  • Page 25 Power on/off WARNING ►Never look into the projection window while the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. ►Do not place the projector vertically. It could cause malfunction or injury. Tabletop use must be setup with the designated optional accessories. ►The projection window of this machine is made of glass.

  • Page 26: Turning Off The Power

    Power on/off Turning off the power Press the STANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange.

  • Page 27: Operating

    Operating Operating VOLUME +/- button Adjusting the volume INPUT CALIBRATION Use the VOLUME +/VOLUME - buttons to adjust the volume. ASPECT AUTO ACCENTUALIZER HDCR A dialog will appear on the screen to aid you in adjusting the FOCUS D-ZOOM volume. If you do not do anything, the dialog will automatically PAGE MAGNIFY MYBUTTON...

  • Page 28: Selecting An Input Signal

    Operating Selecting an input signal INPUT button INPUT button Press the button on the projector. Each time you press the button, the projector switches its input port from INPUT CALIBRATION the current port as below. ASPECT AUTO ACCENTUALIZER HDCR FOCUS D-ZOOM PAGE VOLUME...

  • Page 29: Selecting An Interactive Function

    Operating Selecting an Interactive Function Press the IWB button on the remote control. IWB button Displays the IWB MODE dialog. Switches between STAND ALONE and WITH PC mode for the INPUT CALIBRATION currently selected input port. ASPECT AUTO ACCENTUALIZER HDCR D-ZOOM FOCUS See the Interactive Function (85).

  • Page 30: Adjusting The Projector's Elevator

    Operating Adjusting the projector's elevator The projector has 2pcs Rear foot for horizontals and inclinations. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments.

  • Page 31: Using The Automatic Adjustment Feature

    Operating FOCUS - button Press the FOCUS + or FOCUS - button on the remote control, or FOCUS + or FOCUS - button on the projector (5) while no menu is on screen, to display the FOCUS box on INPUT CALIBRATION screen.

  • Page 32: Using The Template Feature

    Operating Using the TEMPLATE feature Press the TEMPLATE button on the remote control. Each time you press the button, the projector switches the INPUT CALIBRATION mode for TEMPLATE in turn. ASPECT AUTO ACCENTUALIZER HDCR FOCUS D-ZOOM TEST PATTERN  DOT-LINE1  DOT-LINE2  DOT-LINE3 PAGE MAGNIFY MYBUTTON...

  • Page 33: Adjusting The Position

    INPUT CALIBRATION ASPECT AUTO ACCENTUALIZER HDCR FOCUS D-ZOOM Operating PAGE MAGNIFY MYBUTTON VOLUME ＋ Adjusting the position DOWN ー KEYSTONE/ PERFECT FIT TEMPLATE FREEZE AV MUTE Press the POSITION button on the remote control while no menu MENU is on screen, to display the D-SHIFT (51) dialog on screen. ENTER POSITION RESET...

  • Page 34: Using The Magnify Feature

    Operating Using the magnify feature Press the MAGNIFY ON button on the remote control. MAGNIFY ON/OFF button The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the INPUT CALIBRATION picture will be zoomed by 1.5 times.

  • Page 35: Temporarily Freezing The Screen

    Operating Temporarily freezing the screen FREEZE button Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen (however, the indication will not appear when the OFF is selected for INPUT CALIBRATION the MESSAGE item in the SCREEN menu (61)), and the ASPECT AUTO ACCENTUALIZER HDCR...

  • Page 36: Using The Menu Function

    Operating Using the menu function This projector has the following menus: IWB, PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, INPUT CALIBRATION SECURITY and EASY MENU. ASPECT AUTO EASY MENU consists of functions often used, and the other menus are classified ACCENTUALIZER HDCR into each purpose and brought together as the ADVANCED MENU.
  • Page 37 Operating Using the menu function (continued) To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ●...

  • Page 38: Easy Menu

    EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description Pressing the ► button displays the IWB dialog. See the Interactive Function (85).
  • Page 39 EASY MENU Item Description Using the ◄/► buttons switches the picture mode. The picture modes are combinations of GAMMA and COLOR TEMP settings. Choose a suitable mode according to the projected source. NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK) DICOM SIM. PHOTO ó...

  • Page 40: Iwb Menu

    IWB menu IWB MENU Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. See the Interactive Function (85).

  • Page 41: Picture Menu

    PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description Using the ◄/►...
  • Page 42 PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
  • Page 43 PICTURE menu Item Description Using the ◄/► buttons adjusts the sharpness. Weak ó Strong SHARPNESS • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION ó...

  • Page 44: Image Menu

    IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
  • Page 45 IMAGE menu Item Description Using the ◄/► buttons adjusts the vertical position. Down ó Up • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when the V POSITION V POSITION is selected will reset the V POSITION to the default setting.
  • Page 46 IMAGE menu Item Description Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker. Right ó Left H PHASE • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B or HDMI 1/2 port.

  • Page 47: Input Menu

    INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

  • Page 48: Ideo Format

    INPUT menu Item Description The video format for VIDEO IN port can be set. Using the ◄/► buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 VIDEO FORMAT • This item is performed only for a video signal from the VIDEO IN port.
  • Page 49 INPUT menu Item Description The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) Use the ◄/► buttons to select the computer input signal type. (COMPUTER IN1) AUTO ó...
  • Page 50 INPUT menu Item Description The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.

  • Page 51: Setup Menu

    SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

  • Page 52: Keystone

    SETUP menu Item Description Using the ▲/▼ cursor buttons selects the horizontal picture position. LEFT ó MID ó RIGHT The PICT. POSIT. H is not changed if any of the following cases apply. • The ASPECT is set to 16:9 or 16:10. •...
  • Page 53 SETUP menu Item Description This item allows you to adjust the shape of the projected image in each of the corners and sides. (1) Choose a corner or side to adjust using the ▲/▼/◄/► buttons and press the ENTER or button.

  • Page 54: Eco Mode

    SETUP menu Item Description • While the distortion is adjusted with the PERFECT FIT function, keystone adjustment feature is unavailable. To correct the keystone distortion, reset the adjustment of all the corners and sides. • The adjustable range of this correction will vary among inputs. For some input, this function may not work well.
  • Page 55 SETUP menu Item Description Pressing the ►button displays the dialog for changing the INSTALLATION setting. INSTALLATION Use the ▲/▼ buttons to select the desired setting on the INSTALLATION dialog. Using the ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING. NORMAL ó...
  • Page 56 SETUP menu Item Description While the image signal from the input port chosen in step (1) is projected, the image signal from the input port selected in step (2) is output to MONITOR OUT port. (1) Choose a picture input port using the ▲/▼ buttons. Choose STANDBY to select the picture output in the standby mode.

  • Page 57: Audio Menu

    AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.
  • Page 58 AUDIO menu Item Description Using the ◄/► buttons adjusts the volume of the microphone connected to the MIC port. MIC VOLUME Low ó High...

  • Page 59: Screen Menu

    SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
  • Page 60 SCREEN menu Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó OFF MyScreen : Screen can be registered by the MyScreen item (60). ORIGINAL : Screen preset as the standard screen.

  • Page 61: Yscreen Lock

    SCREEN menu Item Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON ó OFF When the ON is selected, the item MyScreen is locked. Use this MyScreen Lock function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu (81).
  • Page 62 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼...
  • Page 63 SCREEN menu Item Description (6) The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄ and button at the same time.
  • Page 64 SCREEN menu Item Description The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C.

  • Page 65: Option Menu

    OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME.
  • Page 66 OPTION menu Item Description Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically. AUTO POWER When the time is set to 1 to 99, and when the passed time with no- signal or an unsuitable signal reaches at the set time, the projector...
  • Page 67 OPTION menu Item Description This item is to assign one of the following functions to the MY BUTTON 1/2 on the remote control (7). (1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY BUTTON - (1/2) and press the ► or ENTER button to display the MY BUTTON setup dialog.
  • Page 68 OPTION menu Item Description • ACTIVE IRIS: Changes the active iris mode. • PICTURE MODE: Changes the PICTURE MODE (39). • FILTER RESET: Displays the filter time reset confirmation dialogue (66). MY BUTTON • RESOLUTION: Turns on/off the RESOLUTION dialog (50). (Continued) •...
  • Page 69 OPTION menu Item Description ■ How to activate Place a check mark in the box. Date and first setup info could be seen Check mark with the check mark. in the box SCHEDULE (Continued) ■ PROGRAM EDIT The TIME and EVENT for Program 1 to 16 can be editted. •...
  • Page 70 OPTION menu Item Description ■ How to edit the selected PROGRAM 1. Select from 1 to 20 events. Use the ▲/▼ cursor buttons to select. Press the ► cursor button to set the TIME and EVENT. 2. Use the ◄/► cursor buttons to select.
  • Page 71 OPTION menu Item Description Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. ALTITUDE Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
  • Page 72 OPTION menu Item Description KEY LOCK (1) Use the ▲/▼ buttons to select CONTROL PANEL or REMOTE CONTROL. (2) Use the ◄/► buttons to turn the key lock function on/off. When ON is selected, all buttons on the projector or remote control except the STANDBY/ON button are locked.
  • Page 73 OPTION menu Item Description REMOTE FREQ. (1) Use the ▲/▼ button to change the projector's remote sensor frequency setting (21). 1:NORMAL ó 2:HIGH (2) Use the ◄/► button to change the projector's remote sensor on or off. ON ó OFF The factory default setting is for both 1:NORMAL and 2:HIGH to be on.
  • Page 74 OPTION menu Item Description COMMUNICATION TYPE Select the communication type for transmission via the CONTROL port. NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands (Network Bridge Function in the User’s Manual - Network Guide)
  • Page 75 OPTION menu Item Description RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. OFF ó 1s ó 2s ó 3s OFF: Select this mode if it is not required to check the responses from the device that the projector sends data to.
  • Page 76 OPTION menu Item Description The following items are exempted. OPTION: LAMP TIME, FILTER TIME, SERVICE(GHOST) NETWORK: WIRELESS AND WIRED SETUP (IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY, DATE AND TIME), MY IMAGE, PRESENTATION SECURITY: MY TEXT DISPLAY • Operation is not available if SECURITY_ CLONNING LOCK is turned ON.
  • Page 77 OPTION menu Item Description Load MyScreen data • Please save the image data as "pj_logo.bmp" or "pj_logo.gif" into USB memory. • Please note that the only compatible formats are as follows. -File format Windows BMP bit/pixel: 4/8/16/24/32bit Compression format : Without compression/RLE/GIF -Image size: more than 36x36, less than 1280x800 •...
  • Page 78 OPTION menu Item Description Loading function (continued) • Please note that the saved data of START UP and MyScreen Lock under SCREEN menu cannot CLONING be loaded if MyScreen PASSWORD under (continued) SECURITY menu is ON. • Please note that the saved data of MY TEXT WRITING cannot be loaded if MY TEXT PASSWORD under SECURITY menu is ON.

  • Page 79: Network Menu

    NETWORK menu NETWORK menu See the Network Guide for details of NETWORK operation. Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network.

  • Page 80: Security Menu

    1. Press the ► button. The ENTER PASSWORD box will be displayed. 2. Use the ▲/▼/◄/► buttons to enter the registered password. The factory default password is as follows. CP-TW2503, CP-TW3003 : 9335 (below) This password can be changed . Move the cursor to the right side of the ENTER PASSWORD box and press the ►...
  • Page 81 SECURITY menu Item Description The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ►...
  • Page 82 SECURITY menu Item Description PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 Turning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu.
  • Page 83 SECURITY menu Item Description The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT; • The MY TEXT DISPLAY menu will be unavailable, which can prohibit changing the DISPLAY setting. •...
  • Page 84 SECURITY menu Item Description (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► or ENTER button to display the MY TEXT DISPLAY on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select on or off.

  • Page 85: Presentation Tools

    Presentation tools Presentation tools The projector has the following convenient tools that enable on-screen presentations easily and quickly: - Interactive Function (below) - PC-LESS Presentation (106) - USB Display (116, 121) Interactive Function Computer cable USB cable StarBoard Software The Interactive Function enables interactive operation without a dedicated board such as the operation on the connected computer or writing on the display with the sensor equipped in the projector and bundled Interactive pen.
  • Page 86 Presentation tools Interactive Function (continued) Connection during use Follow the procedure below to connect the computer to the projector. DISPLAY HDMI USB TYPE A (1) Connect the computer cable to the COMPUTER IN or HDMI port of the projector, and fasten using the screw. (2) Connect the opposite end of the computer cable in (1) to the DISPLAY port of the computer, and fasten using the screw.
  • Page 87 Presentation tools Interactive Function (continued) NOTE • When the Interactive Function is in use, it is recommended that you make use of input signals from the COMPUTER IN1, COMPUTER IN2, HDMI1 and HDMI2 ports. • Noise through the USB cable may trigger a malfunction depending on the computer and projector you are using.
  • Page 88 Presentation tools Interactive Function (continued) USER SETTING The Interactive Function can be set in IWB of the EASY MENU or IWB of the ADVANCED MENU. Item Description While the image signal from the input port chosen in step (1) is projected, select IWB MODE in step (2).
  • Page 89 Presentation tools Interactive Function (continued) NOTE • When you select WITH PC mode, the following settings are fixed. - ASPECT [NORMAL] - OVERSCAN [10] - PICT.POSIT. H. [MID] • USB TYPE A port is supported only for STAND ALONE mode. •...
  • Page 90 Presentation tools Interactive Function (continued) Item Description Performs the initial setting of the Interactive Function automatically. • You can use AUTO CALIBRATE function only when selecting WITH PC mode of the IWB MODE. • The following pattern image is displayed while executing AUTO CALIBRATE.
  • Page 91 Presentation tools Interactive Function (continued) Item Description Using bundled pen performs the initial setting of the Interactive Function. Click on the center of the marker displayed in the image from the projector with a bundled pen. Every time you click with a bundled pen, the position of the marker changes.

  • Page 92: Main Functions

    Presentation tools Interactive Function (continued) When selecting STAND ALONE mode of the IWB MODE, you can use internal paint tool of the projector. Main Functions It offers effective features for making classroom and business presentations more fun and easier to understand. Drawing on projected images You can draw pictures or text on images projected by our projectors.
  • Page 93 Presentation tools Interactive Function (continued) Using the Drawing Function Touching the projected image from the projector with a bundled pen starts Drawing Mode. A tool bar like the figure below is displayed on the projector screen while in the drawing mode. Touching an icon on the tool bar with the pen enables the following functions.
  • Page 94 Presentation tools Interactive Function (continued) 2. Graphic drawing Selecting graphics to be drawn with a pen / Laser Pen. Freehand : You can draw by freehand with a pen / Laser Pen. Straight line drawing : Draws a straight line from where starting dragging to where finishing dragging with a pen / Laser Pen.
  • Page 95 Presentation tools Interactive Function (continued) 5. Eraser The cursor turns into an Eraser ; dragging it erases previously drawn lines. Specifies a 12-dot Eraser. Specifies a 20-dot Eraser. Specifies a 28-dot Eraser. 6. Editing operation You can Undo/Redo/Erase the drawing. Undo: Restores the drawing.
  • Page 96 Presentation tools Interactive Function (continued) 7. Projector Operation (Continued) Saves the image on the projector screen, along with any text or pictures drawn, onto a USB memory device connected to the projector. • Files are saved with the file name “Pxxx.bmp” (where xxx is a consecutive number) into a folder named “PJ_Capture”...
  • Page 97 Presentation tools Interactive Function (continued) 8. Mouse Operation When selecting this icon, whether the connected computer supports multi-touch or not is determined automatically. Up to 4 pens are supported on a computer supporting multi-touch. When selecting this icon, multi-touch operation is not supported. When the computer screen is displayed, this function operates the computer like a simple mouse or keyboard.
  • Page 98 Presentation tools Interactive Function (continued) 8. Mouse Operation (Continued) Works like the Page Down button on a keyboard. Works like the Page Up button on a keyboard. Works like the right-click button on a mouse. Works like the F5 button on a keyboard. Goes back to drawing mode.
  • Page 99 Presentation tools Interactive Function (continued) Preliminary preparation To use the Interactive Function, a special pen is needed (8). Insert battery into the pen before using (23). The optional part Finger Touch Unit (FT-01) enables Interactive operation by fingers. Using the pen To write or draw using the pen, press the tip of the pen against the screen surface and move the pen accordingly.
  • Page 100 Presentation tools Interactive Function (continued) Basic pen operation You can perform the following mouse operations using the button at the tip of the pen. • Click Press the tip of the pen against the screen surface with moderate force, and lift it quickly.
  • Page 101 Hitachi Interactive Projector, or the projector. ("StarboardSoftware" is not changed). • The set of functions that are available for the combination of Hitachi Interactive Projector and Starboard Software is in conformity with the Starboard FX Portable Series.
  • Page 102 Presentation tools Interactive Function (continued) System requirements : StarBoard Software The following specification is required to use Interac tive Function . (Windows computer) Computer : Install the dedicated application "StarBoard Software". The following is the minimum hardware and operating system requirements to install "StarBoard Software".
  • Page 103 Presentation tools Interactive Function (continued) (When i-learn: maths toolbox is used) • Display : 1024 x 768 or more • Application: Adobe Reader ® • Others: 32bit color 3D video card The installation requirements are subject to change without notice due to software upgrades or the like.
  • Page 104 Presentation tools Interactive Function (continued) NOTE • Do not place the projector near equipment that may emit electromagnetic waves or radio waves, such as a radio transmitter, TV, copier, or air-conditioner. • Avoid excessively dusty places, or places that are subject to extremely high or low temperature or humidity.
  • Page 105 Presentation tools Interactive Function (continued) System requirements : i-Pro The following specification is required. (Windows computer) ü CPU: Intel Dual Core (1.5GHz or higher) ü Memory: 1 GB or more ü HDD: 100 MB free space ü Graphic Card: 256 MB or more ü...

  • Page 106: Pc-Less Presentation

    Presentation tools PC-LESS Presentation The PC-LESS Presentation reads image and audio data from the storage media inserted into the USB TYPE A port and displays the image in the following modes. The PC-LESS Presentation can be started by selecting the USB TYPE A port as the input source.

  • Page 107: Thumbnail Mode

    Presentation tools PC-LESS Presentation (continued) [Supported file format and its extension] • JPEG (.jpeg, .jpg) * Progressive is not supported. • Bitmap (.bmp) * 16bit mode and compressed bitmap is not supported. • PNG (.png) * Interlace PNG is not supported. •...
  • Page 108 Presentation tools PC-LESS Presentation (continued) Operating by buttons or keys You can control the images on the Thumbnail screen with the remote control, control panel, Web Remote Control or pen. The following functions can be supported while the Thumbnail is displayed. Button operation Functions Web Remote...
  • Page 109 Presentation tools PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen You can also control the images by using the menu on the Thumbnail screen. Item Functions Moves to an upper folder. SORT Allows you to sort files and folders as following. Press the ►...

  • Page 110: Internal Memory

    Presentation tools PC-LESS Presentation (continued) NOTE • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode is able to display up to 20 files in one page. • It is not possible to change the input port by using the button when the Thumbnail screen, Slideshow, or Full Screen is displayed.

  • Page 111: Full Screen Mode

    Presentation tools PC-LESS Presentation (continued) Full Screen Mode The Full Screen mode shows a full display image. To display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control, the button on the control panel or click [ENTER] on the Web Remote Control.
  • Page 112 Presentation tools PC-LESS Presentation (continued) Operations for movie A remote control icon and a progress bar are displayed when one of the cursor buttons, ENTER button or button on the remote control, control panel or Web Remote Control is pressed or clicked while a movie is playing in the Full Screen mode.

  • Page 113: Slideshow Mode

    Presentation tools PC-LESS Presentation (continued) Slideshow mode The Slideshow mode displays images in full screen and switches the images at intervals set in INTERVAL on the Thumbnail screen menu (109). You can start this function from the Slideshow menu. To display the Slideshow menu, select the SLIDESHOW button in the Thumbnail mode and press the ENTER button on the remote control, button on the control panel, or click...
  • Page 114 Presentation tools PC-LESS Presentation (continued) You can play the Slideshow at your desired configuration. Configure the Slideshow items in the Thumbnail. 1) RETURN : Returns to the thumbnail mode. 2) PLAY : Play the Slideshow. 3) START : Set the beginning number of the Slideshow.
  • Page 115 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow. The playlist file name is “playlist.txt” and it can be edited on a computer. It is created in the folder that contains the selected image files when the PC-LESS Presentation is started or the Slideshow is configured.

  • Page 116: Usb Display(Windows Computer)

    Presentation tools USB Display(Windows computer) The projector can display images transferred from a computer via an USB cable (13). Hardware and software requirement for computer • OS: One of the following. ® Windows XP Home Edition /Professional Edition ® Windows Vista Home Basic /Home Premium /Business /Ultimate /Enterprise ®...
  • Page 117 Presentation tools USB Display(Windows computer) (continued) This application will appear in the Windows notification area once it starts. You can quit the application from your computer by selecting “Quit” on the menu. NOTE • The “LiveViewer” (refer to the Network Guide) and this application cannot be used at the same time.
  • Page 118 Presentation tools USB Display(Windows computer) (continued) Right-Click menu The menu shown in the right will be displayed when you right-click the application icon in the Windows notification area. Display : The Floating menu is displayed, and the icon disappears from the Windows notification area.

  • Page 119: Options Window

    CP-TW2503, CP-TW3003: 1280 x 800 (WXGA) If your computer does not support the display resolution specified above, a smaller resolution that is the largest among the resolutions that are supported by the computer will be selected.
  • Page 120 NOTE • Please check this box when you use Starboard Software with CP-TW2503/TW3003. The annotation layer may not display on the projector image when this option is OFF. About The version information of the “LiveViewer Lite for USB”.

  • Page 121: Usb Display(Mac Computer)

    Presentation tools USB Display(Mac computer) The projector can display images transferred from a computer via an USB cable (13). Hardware and software requirement for computer • OS: Mac OSX 10.5(Intel) Mac OSX 10.6(Intel) Mac OSX 10.7(Intel) This application is not compatible with Power PC. •...
  • Page 122 Presentation tools USB Display(Mac computer) (continued) NOTE • The “LiveViewer” (refer to the Network Guide) and this application cannot be used at the same time. If you connect your computer to the projector by using a USB cable while the “LiveViewer”...
  • Page 123 Presentation tools USB Display(Mac computer) (continued) Menu       If you select “Display” on the Right-Click menu, the Floating menu shown in the right will appear on your computer screen.  Start capture button The transmission to the projector is started and the images will be displayed.
  • Page 124 CP-TW2503, CP-TW3003: 1280 x 800 (WXGA) If your computer does not support the display resolution specified above, a smaller resolution that is the largest among the resolutions that are supported by the computer will be selected.

  • Page 125: Maintenance

    Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. <CP-TW2503/CP-TW3003> Type number : DT01411 lamp cover Replacing the lamp Turn the projector off, and unplug the power cord.

  • Page 126: Lamp Warning

    Maintenance Replacing the lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.

  • Page 127: Cleaning And Replacing The Air Filter

    Maintenance Cleaning and replacing the air filter The air filter unit of this projector consists of a filter cover, two kinds of filters, and a filter frame. The new double large filters system is expected to function longer. However, please check and clean it periodically to keep ventilation needed for normal operation of the projector.
  • Page 128 Maintenance Cleaning and replacing the air filter (continued) Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU. (1) Press the MENU button to display a menu. (2) Point at the FILTER TIME using the ▼/▲ button, then press the ► button. A dialog will appear.

  • Page 129: Caring For The Projection Window And Camera Lens

    Maintenance Caring for the projection window and camera lens If the projection window is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the projection window, being cautious of handling. Turn the projector off and unplug the power cord from the power outlet.

  • Page 130: Replacing The Internal Clock Battery

    While prying it up, put a finger lightly on the battery since it may pop out of the holder. Replace the battery with a new HITACHI MAXELL, Part No.CR2032 or CR2032H. Slide the battery in under the plastic claw, and push it into the holder until it clicks.

  • Page 131: Other Care

    Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc.

  • Page 132: Troubleshooting

    Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. WARNING ►Never use the projector if abnormal operations such as smoke, Troubleshooting strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect the power plug from the power outlet.
  • Page 133 Troubleshooting Related messages (continued) Message Description The horizontal or vertical frequency of the input signal is not within the specified range. Please confirm the specs for your projector or the signal source specs. An improper signal is input. Please confirm the specs for your projector or the signal source specs.

  • Page 134: Regarding The Indicator Lamps

    Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP Description indicator indicator indicator The projector is in a standby state. Lighting Turned Turned...
  • Page 135 Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator There is a possibility that the interior portion has become heated. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of Blinking the following items, and then turn the power on again.
  • Page 136 Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator Lighting Lighting Lighting Loading the saved data of CLONING on STANDBY Orange MODE. Loading the saved data of CLONING has failed on Blinking Blinking Blinking STANDBY MODE. Orange Please refer to CLONING (75 ~ 78).

  • Page 137: Resetting All Settings

    Troubleshooting Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION menu (78) can reset all settings (except settings such as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, SECURITY and NETWORK) to the factory default.
  • Page 138 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. 12 ~ 17 Correctly connect the audio cables. The MUTE function is working. Restore the sound pressing the VOLUME +/- button on the remote control.
  • Page 139 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. 12 ~ 17 Correctly connect the connection cables. The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function.
  • Page 140 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The FREEZE function is working. Video screen display freezes. Press the FREEZE button to restore the screen to normal. Color settings are not correctly adjusted.
  • Page 141 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The sound When LAN, USB TYPE A or USB TYPE B port is selected, some ports of the output may be missing or image due to signal processing delay.
  • Page 142 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Disconnect the LAN cable and check that the projector When the is working properly. projector is connected to If this phenomenon occurs after connecting to the network, wired LAN, it there may be a loop between two Ethernet switching hubs...
  • Page 143 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Is the power of the projector turned on? Check to ensure that the POWER indicator of the projector is lit in green.
  • Page 144 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Is transmission between the pen and the projector obstructed? Make sure that the area between the sensor at the top surface of the projector and the screen is not obstructed (transparent and meshed objects are also not allowed).
  • Page 145 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Has calibration been performed? 29, 90, Press the CALIBRATION button or perform calibration from the menu. Is driver software U-Pointer set to "Finger Touch Mode"? –...
  • Page 146 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page This may be due to exhaustion of the battery of the pen. Replace the battery with new one. Use only the specified and perfect battery.
  • Page 147 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Does the light from the outside fall directly on the screen? Execute AUTO CALIBRATE after making the image brighter 54, 90, by setting ECO MODE of SETUP to NORMAL and setting AUTO ECO MODE to OFF.

  • Page 148: Specifications

    National Electrical Manufacturers Association for its standards publications relating to digital communications of medical information. ® • StarBoard is a registered trademark of Hitachi Solutions, Ltd. in Japan and other countries. ® ® ®...

This manual is also suitable for:

Cp-tw3003

Table of Contents