Table of Contents
Advertisement
PERIODIC MAINTENANCE AND ADJUSTMENT
Adjusting the clutch lever free
play
4
1. Rubber cover
2. Clutch lever free play adjusting bolt
3. Locknut
4. Clutch lever free play
The clutch lever free play should mea-
7
sure 5.0–10.0 mm (0.20–0.39 in) as
shown. Periodically check the clutch le-
ver free play and, if necessary, adjust it
as follows.
1. Slide the rubber cover back at the
clutch lever.
2. Loosen the locknut.
3. To increase the clutch lever free
play, turn the clutch lever free play
adjusting bolt in direction (a). To
EAU50270
decrease the clutch lever free play,
turn the adjusting bolt in direction
(b).
TIP
1
2
3
If the specified clutch lever free play
(a)
could be obtained as described above,
skip steps 4–7.
4. Fully turn the adjusting bolt in di-
(b)
rection (a) to loosen the clutch ca-
ble.
5. Slide the rubber covers apart, and
then loosen the locknut.
1. Rubber cover
2. Locknut
3. Clutch lever free play adjusting nut
6. To increase the clutch lever free
play, turn the clutch lever free play
adjusting nut in direction (a). To
1
1
(a)
(b)
2
3
7-17
decrease the clutch lever free play,
turn the adjusting nut in direction
(b).
7. Tighten the locknut at the clutch
cable, and then slide the rubber
covers to their original positions.
8. Tighten the locknut at the clutch le-
ver, and then slide the rubber cov-
er to its original position.
- Quick Links:
- Owner's Tool Kit
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
