Page 1
Keep this user’s guide in a convenient place for future reference. Keep the carton and original packaging for future use. Model No: Serial Number: 32" class (31.5" Diagonal) HIGH-DEFINITION TELEVISION 0808TKH-FU-FU...
NTRODUCTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
Precautions Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
NTRODUCTION LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. •...
Features • DTV/TV/CATV You can use your remote control to select channels which are broadcast in digital, conventional analog, standard definition, and high definition formats. Also, cable subscribers can access their cable TV channels. • Program Information Display (DTV only) You can display the title, contents and other information of the current DTV program on the TV screen.
Remote Control Function 10. EJECT A button (p29) 11. DISC MENU button (p29) 12. MODE button (p35) 13. SEARCH MODE button (p33) Installing the Batteries Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control. Battery Precautions: •...
NTRODUCTION Control Panel Rear Panel PC-IN AUDIO COMPONENT 1 AUDIO AUDIO S VIDEO VIDEO VIDEO 1 COMPONENT 2 AUDIO rear of this unit 1. POWER button (p13) Press to turn the unit on and off. side of this unit 2. INPUT SELECT button (p16) •...
ONNECTION Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable receiver or satellite box. Note: • Be sure your antenna or other device is connected properly before plugging in the AC power cord. [Antenna Cable Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.
ONNECTION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to this unit is of the highest possible resolution. e.g.) DVD recorder with the HDMI output jack Note:...
Page 11
Cables not included. Please purchase the necessary cables at your local store. Note: • This unit accepts 480i / 480p / 720p / 1080i video signals. [S-video Cable Connection] S-video connection offers good picture quality for video devices connected to the unit. Use an S-video cable to connect the unit to external video devices equipped with S-video output jack.
Page 12
ONNECTION Cables not included. Please purchase the necessary cables at your local store. [Audio Output Connection] [Digital] If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. [Analog] If you connect this unit to an external analog audio device, you can enjoy stereo (2 channel) audio. e.g.) Stereo system e.g.)
NTIAL SETTING These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and auto channel scan, which automatically scans and memorizes viewable channels.
NITIAL SETTING And select the sound input for the HDMI jack if your TV is connected to a HDMI device. (Refer to “HDMI Audio” on page 27.) • LANGUAGE You can change the language (English, Spanish, French) displayed on the main menu. (Refer to “Language Selection”...
ATCHING TV Channel Selection Select channels by pressing [CHANNEL / ] or [the Number buttons]. • To select the memorized channels, use [CHANNEL / ] or [the Number buttons]. • To select the non-memorized channels use [the Number buttons]. To Use [the Number buttons] When selecting analog channel 12 When selecting digital channel 12-1 Be sure to press [–] before entering the minor...
ATCHING TV To Cancel the Sleep Timer Press [SLEEP] repeatedly until “Sleep Off” is displayed on the TV screen. Note: • The sleep timer setting display will automatically disappear in 4 seconds. • When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.
Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. In the analog mode, the current channel number and the audio mode are displayed. Press [INFO]. / STEREO 480i 480i TV-PG DLSV •...
ATCHING TV TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [SCREEN MODE] repeatedly to switch the TV aspect ratio.
PTIONAL SETTING Channel List The channel list function lets you remove undesired channels from the channel registration list. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “CHANNEL”, then press [ENTER]. Use [Cursor K / L] to select “Channel List”, then press [ENTER].
PTIONAL SETTING Antenna Confirmation This function lets you check the signal strength of each channel. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “CHANNEL”, then press [ENTER]. Use [Cursor K / L] to select “Antenna”, then press [ENTER].
Reset Settings Use [Cursor K / L] to select “Reset”, then press [ENTER] to restore the “Picture Mode” setting to default. Color Temp. Use [Cursor K / L] to select the desired setting, then press [ENTER]. (Cool, Neutral and Warm) Energy Saving Use [Cursor s / B] to adjust the brightness of the backlight.
PTIONAL SETTING Closed Caption You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “DETAIL”, then press [ENTER].
DTV Closed Caption In addition to the basic closed caption described on page 22, DTV has its own closed caption called DTV CC. Use this menu to change the settings for DTV CC. Repeat steps 1 and 2 in “Closed Caption”on page 22. Use [Cursor K / L] to select “Closed Caption”, then press [ENTER].
PTIONAL SETTING [Font Size] Font size of the displayed caption can be switched as below. [Font Color] Font color of the displayed caption can be switched as below. [Font Opacity] Font opacity of the displayed caption can be switched as below. [Back Color] Background color of the displayed caption can be switched as below.
Page 25
Note: • When you select a rating and set it to “Block”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing. • When you set the highest rating to “View”, all ratings turn to “View” automatically. •...
PTIONAL SETTING Sub Rating Category Fantasy Violence Violence Sexual Situation Coarse Language Suggestive Dialogue Note: • Blocked sub rating will appear beside the main rating category in “TV Rating” menu. • You cannot block a sub rating (D, L, S or V) if the main rating is set to “View”.
Press [SETUP] to exit. Note: • Adjust the “Phase” setting after the “Clock” setting has been properly adjusted. • You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually. HDMI Audio You can set the method of sound input for the HDMI 1-IN jack.
These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Playback JPEG on page 30) Before you begin: Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct channel.
PERATING DVD Fast Forward / Fast Reverse Press [FWD D] or [REV E] repeatedly during playback to select the required forward or reverse speed. To continue playback, press [PLAY B]. Note: • Set “STILL MODE” to “FIELD” in the “OTHERS” menu if pictures in the fast playback mode are blurred.
Note: • A file with an extension of “.mp3 (MP3)” is called an “MP3 file”. • A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is called a “JPEG file”. • Some selections may take a while to be recognized. •...
PERATING DVD Dual Playback JPEG This function lets you play back MP3 and JPEG files simultaneously. Available only when “DUAL PLAYBACK” is “ON”. See page 42 on how to set “DUAL PLAYBACK” “ON” or “OFF”. Press [PLAY B], then press [DISC MENU]. FILE LIST FOLDER JPEG...
Press [BACK/RETURN] to exit. Note: • Picture adjustment menu will not be displayed while in the stop mode or from the file list. • This feature may have no effect on some files (e.g. Files with a small picture size). •...
PERATING DVD Using [SKIP H , G] During playback, press [SKIP H, G] repeatedly until a desired track/file will be selected. current track/file TR 1 TR 2 TR 3 TR 4 [SKIP H] Playback will start automatically from the track/file you selected.
Repeat A-B Playback You can repeat playback between A and B on a disc. During playback, press [A-B] at your desired starting point (A). Press [A-B] at your desired ending point (B). • Point B should be in the same title or track as point A. •...
PERATING DVD On-screen Display You can check the information about the current disc by pressing [INFO] on the remote control. appears only when multi- angle is available on the DVD current playback status 11/16 0:00:00 - 0:03:30 remaining time of the current chapter elapsed time of the current chapter...
Special Settings Subtitle Language Subtitle Language This unit allows you to select a subtitle language (if available) during DVD playback. During playback, press [SUBTITLE] repeatedly until the desired language appears. 1.ENG/6 subtitles can be varied on the displayed number. current subtitles language. •...
Page 38
PERATING DVD Stereo Sound Mode Stereo Sound Mode This unit allows you to select a sound mode during CD playback. During playback, press [AUDIO] repeatedly until the desired sound mode appears. • Each time you press [AUDIO], the sound mode changes as example below.
ETTING DVD Settings are only effective when the unit is in DVD mode and any discs should not be played back. DVD Language Setting You can change the desired language when playing back the disc. Press [SETUP] to display the main menu. Use [Cursor K / L ] to select “DVD”, then press [ENTER].
ETTING DVD DVD Audio Setting Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “DVD”, then press [ENTER]. Setup Setup Press “ENTER”...
Parental Setting Parental setting prevents your children from viewing inappropriate materials. (password protected.) Playback will stop if the ratings exceed the levels you set. Press [SETUP] to display the main menu. Use [Cursor K / L ] to select “DVD”, then press [ENTER]. Setup Setup Press “ENTER”...
ETTING DVD Others You can change the other functions. Press [SETUP] to display the main menu. Use [Cursor K / L ] to select “DVD”, then press [ENTER]. Setup Setup Press “ENTER” key to move to DVD Setup. Use [Cursor s / B] to select “ OTHERS ANGLE ICON STILL MODE...
Reset to the Default Setting You can reset all the settings except for the parental setting and on-screen menu language. Press [SETUP] to display the main menu. Use [Cursor K / L ] to select “DVD”, then press [ENTER]. Setup Setup Press “ENTER”...
ROUBLESHOOTING Troubleshooting Guide If the unit does not perform properly when operated as instructed in this user’s guide, check the following chart once before calling for service. Symptom No power No picture or sound No color Sound OK, picture poor Picture distorted Weak picture Lines or streaks in picture...
Page 45
Symptom The entered channel number changes automatically Remote control does not work Misspelled captions are displayed. Captions are not entirely displayed, or captions are delayed behind the dialogue. Captions are displayed as a white box. No caption is displayed in the Closed Caption-supported program.
NFORMATION Maintenance Cabinet Cleaning • Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the unit.
Cable Channel Designations If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations. CATV channel TV Display CATV channel...
Page 52
JVC Loves the Earth JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 Printed in China A74F3UH 1EMN24159 ★★★★★...