Installing Optional Chassis Accessories On The Cisco Asr 9010 Router - Cisco ASR 9000 Series Installation Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Chapter 2
Unpacking and Installing the Chassis
Installing Optional Chassis Accessories on the Cisco ASR 9010 Router
The optional chassis accessories for the Cisco ASR 9010 Router include:
•
•
•
•
•
•
•
Installation of the optional accessory pieces also includes the base accessory ball studs and front grill.
Note
The base accessory side strips are not used when installing the optional chassis accessories.
If you ordered the optional accessories set, follow these steps to install both the base and optional
accessories (see
Attach the left L-shaped bracket (item 3 in
Step 1
with two screws. Tighten the screws to a torque of 5 in-lb (0.55 N-m).
Repeat
Step 2
Remove the two screws that secure the bottom edge of the cable management tray to the chassis.
Step 3
Install six ball studs (three per side) into the chassis front edge (see item 7 in
Step 4
Figure
Six ball studs
Two L-shaped brackets
Two hinge brackets (left and right side)
Eight screws (plus one extra) for attaching the hinge brackets
Four screws for attaching the L-shaped brackets
Two doors (left and right side)
One mid-cover with door lock
Figure
2-53):
Step 1
for the right hinge bracket and right L-shaped bracket.
2-54). Tighten the ball studs to a torque of 8 in-lb (0.90 N-m).
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Figure
2-53) to the left hinge bracket (item 2 in
Installing Chassis Accessories
Figure
2-53)
Figure 2-53
and
2-63
- Quick Links:
- Power Connection Guidelines
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
