Page 1 User Guide...
Page 2: Safety Instructions
Safety Instructions Please Read Before Proceeding Avoid heavily pressing on the touch screen. Avoid heavily pressing on the touch screen with the stylus or your fingers. This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use.
Page 3: Where To Find Information
Where to Find Information For information on: See this source: Programs on your Pocket This User’s Guide and Pocket PC Help. To view Help, tap > Help. Additional programs that The Pocket PC Getting Started CD. can be installed on the Pocket PC Connecting to and Check the user’s guide that comes with this...
Page 4: Trademarks And Copyright
Trademarks and trade names mentioned in this document are those of their respective owners. ® Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Acer Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Page 5: Table Of Contents
Contents Getting Started / ..............1-1 ACKAGE ONTENT ................. 1-2 XTERNAL IEWS ............ 1-4 ARDWARE OTKEY UNCTIONS SIM C ) ................1-6 Installing the SIM Card(s) ............. 1-6 Removing the SIM Card(s)............ 1-7 ..................1-8 ATTERY Installing the Battery ............1-8 Removing the Battery............
Page 6 Managing Dual SIM Cards on a Single Device ....2-21 Flight Mode ............... 2-22 PC ........2-23 NTER NFORMATION ON OCKET Enter Text Using the Input Panel ........2-24 Write on the Screen ............2-28 Draw on the Screen ............2-30 Record a Message..............
Page 7 Customize Your Pocket PC / ..............5-1 DJUSTING ETTINGS ................5-2 OTIFICATIONS ............5-3 OWER REFERENCE ETTINGS ................5-4 ACKLIGHT ................5-5 IGHT ENSOR ................ 5-6 RAVITY ENSOR ................5-7 ICROPHONE ................. 5-8 DJUST OLUME ............... 5-9 EMORY PTIMIZATION ................5-10 CENARIOS ..........
Page 8 Setup the Bluetooth Connection.......... 7-9 ..............7-13 NTERNET HARING CSD T ................7-14 ........7-15 ONNECTING WITH A ERSONAL OMPUTER LAN T ............. 7-15 IRELESS RANSMISSION Using Wireless LAN / LAN ............ 8-2 ONNECTING TO IRELESS ........... 8-3 ONFIGURE IRELESS ETWORK WLAN Setup Scenarios............
Page 9 10 Multimedia / 10-1 ................ 10-1 SING AMERA Pocket PC Exterior and Camera.......... 10-1 How to Use the Camera?........... 10-3 Common Tools for Camera..........10-7 Common Tools for Camcorder......... 10-10 Advanced Setup for Camera or Camcorder...... 10-12 .................. 10-15 LBUM Preview Album Information..........
Page 10 ................ 11-18 XCEL OBILE Tips for Working in Excel Mobile........11-20 ............... 11-21 OWER OINT OBILE ............11-22 INDOWS EDIA LAYER ..............11-24 TREAMING LAYER ..............11-25 NTERNET XPLORER Using Internet Explorer............. 11-25 The Mobile Favorites Folder..........11-27 Favorite Links ..............11-28 Synchronize Mobile Favorites ...........
Page 11 Application Settings Page........... 13-8 Music Settings Page ............13-10 Digit Training Page............13-12 Digit Settings Page............13-14 Advanced Settings Page........... 13-15 FAQ..................13-16 14 Specifications / 14-1 15 Regulation Notice and Safety Declaration / 15-1 SAR I ..............15-1 NFORMATION ..........
Page 13: Getting Started
Package Content Pocket PC, stylus, battery, Getting Started CD, Quick Start Guide, AC adapter, USB cable, headset, leather case. Pocket PC Stylus Battery Getting Started CD Quick Start USB Cable AC Adapter Guide...
Page 14: External Views
External Views 7 8 9 21 22 23 24 1. Strap holder 2. Volume control key 3. Record key / Voice Commander 4. Headset connector hot key 5. Light sensor 6. Video conference camera 7. Bluetooth / WLAN / GPS LED 8.
Page 15 17. RESET button 18. MicroSD slot 19. Camera hot key or Camcorder 20. Stylus holder 21. Camera lens 22. Preview mirror 23. Flashlight LED 24. Speaker 25. Back cover, battery is inside...
Page 16: Hardware Hotkey Functions
Hardware Hotkey Functions Long Press Short Press Hardware Button (Press and hold for a few (Press once and release) seconds and release) Adjust volume Record Notes / Voice Commander Phone / dial / redial / Telephone hold answer Hang up during call Turns off the phone Disconnect during GPRS function...
Page 17 Long Press Short Press Hardware Button (Press and hold for a few (Press once and release) seconds and release) POWER button + RESET button = Cold boot RESET button Camera or Camera Shutter...
Page 18: Sim Card(S)
SIM Card(s) Your device is designed for operating two SIM cards simultaneously, so you can receive and make calls on either number. Both the SIM card slots are capable of carrying GSM SIM cards. The slot on the right is dedicated for GPRS/3G compatible SIM card.
Page 19: Removing The Sim Card(S)
Removing the SIM Card(s) 1. Disconnect the USB cable or AC adapter if either of them is connected to your Pocket PC. 2. If the battery is installed, turn off the device and remove the battery. 3. With a small amount of pressure, plug your stylus tip a bit into the hole on the top of SIM slot, use it to hook the SIM card edge until it loosens from the SIM card holder.
Page 20: Battery
Battery Using the Pocket PC for the First Time If you are opening this product for the first time, the main battery and the Pocket PC are packed separately inside the product package. Installing the Battery 1. Turn over the Pocket PC and remove the back cover. 2.
Page 21: Removing The Battery
Removing the Battery 1. If the phone, GPRS or wireless LAN connection function is already activated, deactivate it first and then replace the battery. 2. Disconnect the USB cable or AC adapter if either of them is connected to your Pocket PC. The removal of SIM card or battery while the Pocket PC is connected with a USB cable or AC adapter may damage your device.
Page 22: Charging Power And Power Supply
Charging Power and Power Supply Connect the AC adapter plug to any household power outlet. Connect the other plug from the AC adapter to the USB port. The Pocket PC starts to charge automatically. If you need to connect Pocket PC and desktop computer, you could connect the USB cable to the USB port.
Page 23 1. It will take about 8 hours to fully charge the battery after the first time you open the package. Subsequent charging will only take about 3 hours. After charging, you can disconnect the AC adapter and carry the Pocket PC around portably.
Page 24: Getting Started
Getting Started Getting Started provides you with basic concepts and shortcuts to certain primary features and settings. > Programs > Getting Started. 1 Tap a subject to view how to get started. 2 Tap hyperlink to execute the specified command. 3 Tap Back to return to the Getting Started main screen.
Page 25: Power On And Off
Power On and Off POWER button 1 .Press and hold the POWER button on the Pocket PC and then tap Yes to turn off the Pocket PC. All functions will be disabled; this is not the same as entering Sleep mode. 2 .To turn on, simply press the POWER button once.
Page 26: Sleep Mode
Using the Stylus to Touch the Screen Your Pocket PC is designed for graphics-based operation. Generally speaking, we usually “use the stylus to perform basic actions such as tap, drag, and tap and hold” on the touch screen. Other actions such as reset and cold boot will require the use of the stylus tip.
Page 27: Turn On The Screen
Turn on the Screen This product is designed with a power-saving feature. If the screen is turned off, press the POWER button of the Pocket PC to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight.
Page 28: Restarting The Pocket Pc
Restarting the Pocket PC Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. For your consideration, factoring into your safety and convenience, please refer to the following instructions in order: Reset Press the RESET button of Pocket PC with the tip of the stylus.
Page 29 Reset Reset method: Press the RESET button of Pocket PC with the tip of the stylus. Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen.
Page 30 Default Settings > Programs > Utilities > Default Settings. 1. If this application is inadvertently accessed, please select the to the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in...
Page 31: Clean Boot
Clean Boot Cold boot method: Press and hold both POWER button and RESET button for a while, then release them simultaneously. Wait for a few seconds until the screen wakes up displaying the model name, firmware version and firmware build date of your device, instantly press and hold Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no...
Page 32 The operation “Erase all data and load default?” will delete all the data you stored on your device and restore it back to factory default settings. If you press upon seeing the line “Yes [press CAMERA button]” at the bottom of screen, all the data you stored, programs you installed and customized settings you made on this device will all be cleared.
Page 33: Start
Start Screen >Settings > System tab > Screen. The first time you use or cold boot the pocket PC, the system will ask you to align the screen. Kindly continue to tap the center of each cross (+) that appears and follow the screen instructions to complete the operation.
Page 34 The following steps will bring you into the touch screen calibration mode. These steps provide a faster and more efficacious way to enter the touch screen calibration mode. And they also provide a method of getting into Screen program for when the touch screen dislocation is so severe that you completely cannot select or do anything using the stylus.
Page 35: Today Screen
Today Screen When you turn on your Pocket PC for the first time each day (or after 4 hours of inactivity), you will see the Today screen. You can also display it by tapping > Today. On the Today screen, you can see at a glance the important information for the day.
Page 36 The following table lists the icons that you may see on the Navigation Bar. Kindly refer to the “Meaning” column for explanation or tap on the icon to access the instant message. Meaning Icon (Located on the Navigation Bar at the top of the screen) Speaker is on Ringer off Pending alarm...
Page 37 Meaning Icon (Located on the Navigation Bar at the top of the screen) Missing SIM1 card Missing SIM2 card Phone1 is turned off. Phone2 is turned off. Phone1 is turned on. Signal strength. Phone2 is turned on. Signal strength. Phone1 has not yet detected signal Phone2 has not yet detected signal No service.
Page 38 Meaning Icon (Located on the Navigation Bar at the top of the screen) GPRS not in use GPRS available GPRS connected Synchronizing over GPRS in use EDGE available EDGE connected Synchronizing over EDGE in use 3G network available 3G connected Synchronizing over 3G in use 3.5 G network available 3.5 G connected...
Page 39: Programs
Programs You can switch from one program to another by selecting it from the menu. (You can customize which programs you see on this menu. For information, see “Adjusting Settings” section.) To access some programs, you’ll need to tap > Programs, and then the program name. Icon Programs Description...
Page 40 Icon Programs Description Browse Web and WAP sites, and Internet Explorer download new programs and files from the Internet. Windows Live MSN related programs. Send and receive instant messages with Messenger your MSN contacts. Calculator Performs basic calculations. Pictures & Videos Take, view, and edit pictures.
Page 41: System Application Programs
System Application Programs > Settings > Personal tab Program Description Buttons Set the hot key for Pocket PC hardware button. Input Set the details about the input method. Lock Set the access rights and password of Pocket PC. Menus Set the items displaying on the Start menu.
Page 42 > Settings > System tab Program Description About Display the important information about the Pocket PC. Backlight Set the details about the backlight and brightness. Certificates For network identification to prevent unauthorized access. Clock & Alarms Set the time and alarms. Gravity Sensor The built-in gravity sensor is able to recognize how your Settings...
Page 43 > Settings > Connections tab Program Description Beam Set if receiving end will accept beam data automatically or not. Bluetooth Establish the connection between the Pocket PC and other Bluetooth capable devices. Comm. Manager Manage the connections of your device. Connection Wizard Select the appropriate country and carrier name.
Page 44: Spb Mobile Shell
Spb Mobile Shell Spb Mobile Shell has easy to use functions and tools to keep your Pocket PC organized for quick access. The program consists of the main window panels (Now Screen, Spb Menu, Speed Dial), Quick panel (smart taskbar gestures), Spb Contacts (smart contact search), Task Manager, color based themes, and improved usability for device locking.
Page 45 2. To return to the Today screen or the last active application, the following methods are available. Slide your finger in a downwards gesture. 2-13...
Page 46: Using Spb Mobile Shell
Using Spb Mobile Shell 1. Now Screen panel: The Now Screen gives you a quick and easy way to check your device status. Tap to select a city or open the weather details panel where you can update forecast or access the weather options.
Page 47 2. Spb Menu panel: Spb Menu consists of two parts, smart launcher at the top (12 shortcuts) and six large phone style menu items below. Tap to quick link. The six large menu items not only show you what you have already on your Pocket PC but it also adds very useful tools under some categories.
Page 48 3. Speed Dial panel: The Speed Dial allows you to add up to sixteen photo contacts of your choice. You can also add a shortcut to the Spb Contacts on the panel. Add your favorite contacts to the Speed Dial panel (applies only to entries stored in Contacts on your Pocket PC).
Page 49 On the Speed Dial panel, tap the photo, name, or number of the contact whom you want to call. The contact panel of your selected contact is then displayed. Select one of the phone numbers that you want to dial or send a text message.
Page 50: Configuring Spb Mobile Shell
Configuring Spb Mobile Shell On the Spb Menu panel, tap Settings category > Spb Mobile Shell. > Settings > System tab > Spb Mobile Shell. 1. Now Screen tab: Customize options on your Now Screen display. Show the Now Screen when device wakes up: Enable this option to show the Now Screen each time you wake your device...
Page 51: Communication Manager
Communication Manager Communication Manager will assist you to manage the wireless connections of the Pocket PC including Phone1, Phone2, Bluetooth, WiFi and data connection. You can access Communication Manager by these methods: On the Today screen, tap. On the Today screen, tap the connection status icons on navigation bar, when the message window appears, tap Comm.
Page 52: Switching A Connection On / Off
Switching a Connection On / Off On Communication Manager screen, single tap on these buttons to activate or disable each individual functions. icon indicates that the associated function is currently in the off state. For example, tap , when it becomes , the GPRS connection is available.
Page 53: Managing Dual Sim Cards On A Single Device
Managing Dual SIM Cards on a Single Device You can have two numbers activated simultaneously on this device as if carrying two cell phones. Every time you call out or send a message, you may choose the network at the most economical rate while receiving with the other number freely.
Page 54: Flight Mode
Phone1: Connection status of SIM stored in SIM1(3G ) slot. As the SIM is successfully activated, the telephone receiver symbol will turn from dim grey to glowing orange, and you may receive incoming calls and messages on this number Phone2: Connection status of SIM stored in (SIM2)2G slot.
Page 55: Enter Information On Your Pocket Pc
Enter Information on Your Pocket PC You have several options for entering new information: 1. Use the input panel to enter typed text, either by using the soft keyboard or other input method. 2. Write directly on the screen. 3. Draw pictures on the screen. 4.
Page 56: Enter Text Using The Input Panel
Enter Text Using the Input Panel Use the input panel to enter information in any program on your Pocket PC. You can either type using the soft keyboard or write using Letter Recognizer, Block Recognizer, or Transcriber. In either case, the characters appear as typed text on the screen.
Page 57 Tap here if this is the right word. Note To change word suggestion options, such as the number of words suggested at one time, tap > Settings > Personal tab > Input > Word Completion tab. 2-25...
Page 58: Type With The Soft Keyboard
Type with the Soft Keyboard 1 Tap the arrow next to the Input Panel button and then Keyboard. 2 On the soft keyboard that is displayed, tap the keys with your stylus. Use Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper.
Page 59 Use Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or more of information. Then, pause and let Transcriber change the written characters to typed characters.
Page 60: Write On The Screen
Write on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you’ve written and convert the information to text at a later time.
Page 61: Select Writing
Select Writing If you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Menu, then Undo and try again.
Page 62: Draw On The Screen
Draw on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot.
Page 63: Select A Drawing
Select a Drawing If you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, tapping Menu and then Draw to deselect it and then drag to select the drawings you want.
Page 64: Create A Recording
Create a Recording 1. Hold your Pocket PC’s microphone near your mouth or other source of sound. 2. Press and hold the Record hardware button on your Pocket PC until you hear a beep. 3 While holding down the RECORD button, make your recording. 4 To stop recording, release the RECORD button.
Page 65: Voice Commander
Voice Commander By default, the system sets the button on the side of the Pocket PC as the “Voice Commander button.” Press this button to launch the Voice Voice Commander button Commander. For details on how to use this function, please refer to the Voice Commander section.
Page 66 2-34...
Page 67: Voice Command And Satellite Navigationavigation / 3-1 Navigation Device
Navigation Device Installation Pocket PC Car Charger (* optional): when Pocket PC is low on power, recharge by connecting one end to the car cigarette lighter/12 volt power outlet and the other end to the socket on base of Pocket PC. Attention: The GPS signal receiver is built into the Pocket PC.
Page 68: Gps Navigation Software Installation
GPS Navigation Software Installation Please follow your car navigation system operating manual’s instructions on software installation in order to use the navigation function. Conditions for Using GPS Car Navigation By using this system you are agreeing to the following conditions: 1.
Page 69 2. Please set navigation destination before driving. Do not operate this system while driving. 3. Please use this system with care. If any harm results from careless use of this system, the responsibility for safe driving resides with the driver. 4.
Page 70: Satellite Data Update (Not Supported In Usa)
Satellite Data Update (Not supported in USA) > Programs > GPS > Satellite Data Update. Login to the provider’s server to download instant satellite data and enable the GPS function. Note: either of the following connections allows your Pocket PC to download the latest GPS data.
Page 71 Tap the Download button to update the GPS data manually. The figure on the left shows how to download using the synchronization connection. Tap the Setting button in the Satellite Data Update main screen to open the dialog in the left figure.
Page 72 1. Synchronization connection. Make sure that your Pocket PC is connected to the PC, and that the PC is online. 2. Wireless LAN connection. 3. GPRS connection. When the GPS data has expired, the relevant message displays on the top of the screen. The icon reminds you that your GPS data has expired.
Page 73: Location Sms
Location SMS > Programs > GPS > Location SMS. You can utilize the GPS function offered by your Pocket PC, to send the matching location automatically found by this program and the necessary message to your contacts. This could be helpful in preventing kidnapping, reporting disastrous situations, calling for help in emergencies or locating an individual.
Page 74 1. Select in the main screen, once in the screen shown on the left, tap on any message and tap OK button to select. Further, by pressing and holding anywhere on the screen, together with the pop-up menu, you can add, edit or delete your most used messages.
Page 75: Gps Viewer
GPS Viewer > Programs > GPS > GPS Viewer. You may use this Pocket PC to automatically search the GPS coordinates of your location and check if the GPS functions work properly. 1. Run this program in a location with good signal reception. Greenwich Mean Time (GMT): After connecting to a satellite and obtaining the GMT, it will be...
Page 76 3-10...
Page 77 The Phone feature on the Pocket PC allows you to perform the following tasks: Capability of carrying dual SIM cards. 3.5 G video telephony. Make and receive calls. Quickly make calls or listen to voice mail without entering phone numbers using Contacts, Speed Dial, or your Call Log.
Page 78 When aboard an aircraft, at a medical facility, or at the gas pump where wireless communication devices are prohibited, please launch the Communication Manager and then tap the button. When the color of the icon turns orange , the Flight Mode is activated and the wireless connection of the Pocket PC is disabled.
Page 79 Combination Answer or Adjust Earphone Operation Method End a Call Volume Hold the Hold the Pocket While answering a Press Pocket PC PC and position call, push the on the lower part of manually for the receiver close volume control the Pocket PC.
Page 80: Adjusting The Phone Volume
Adjusting the Phone Volume on the top and adjust all programs’ sound functions under Adjust the phone sound volume under 1. When there is no call, you can push the volume control key on the side of the Pocket PC or use the stylus to tap the speaker icon and then to adjust the...
Page 81: Phone Functions
Phone Functions Turning on Your Phone(s) Before using phone functions, please install you SIM card(s) and turn the phone(s) on. 1. On the Today screen, tap , when the message window appears, tap Comm. Manager. 2. Or tap to launch Communication Manager. 3.
Page 82: Making A Call
Making a Call On the Today screen, tap > Phone or press To make a call, use the screen keypad to enter the phone number and tap to place the call on Phone1 or to place the call on Phone2. Phone1 Service provider name Phone2...
Page 83 Note If only one SIM number on your device is activated, this number will be the primary number when you make calls, and Phone Dialer Selection is thus enabled. Making a call on either number You can always select your desired number to make a single call at will. If selected, the service provider name of this number will turn orange on the Today screen.
Page 84 Tapping to place the call on Phone1 or to place the call on Phone2. Pre-assigning one of your two numbers as the primary number to make outgoing calls: Tap Menu > Phone Dialer Selection and choose the phone line, then you’ll only have to press to make a call on this selected number.
Page 85 Making a call from Call History On the Phone screen, tap Call History . 1. To sort out call entries by different methods, tap Menu and then Filter to list the categories. 2. Find the number you wish to call, tap Call or press to call using the current selected number.
Page 86 3. To view the number of calls, call time and manage call records, tap Menu and then Call Timers. 4-10...
Page 87: Answering / Ignoring A Call
Answering / Ignoring a Call Upon receiving an incoming call, a window will pop up. 1. To answer this call, tap Answer or press 2. To ignore this call, tap Ignore. The headline shows which phone on your device is being called.
Page 88: Ending A Call
Note If a call enters one SIM number while the other SIM number is already on a call, a pop-up window will inform you of the new incoming call, tap Answer to answer it, which will hang up the previous call in the meantime; or tap Ignore to hang up the new incoming call.
Page 89: Video Call
Video Call Video Call enables you to see a real-time, two-way video of the other party during a call. To establish an instant video call with your device, make sure: You are using a 3G SIM card in the coverage of network. The other party is equipped with a compatible device and service system.
Page 90 Carrier name and talk time Incoming / Outgoing call number Return to voice call keypad Video screen of your contact Video screen of yourself Video call control panel: Stop sending your video Switch to front/rear camera lens Video brightness Mute / Unmute microphone Chang the layout of both party’s screen End the video call 4.
Page 91 Receiving a video call Upon receiving a video call, a window pops up to notify you that this is an incoming video call. If you tap Answer, your device will start sending your image to your recipient, tap to stop showing the other party your image during the call.
Page 92: Customizing Your Phone
Customizing Your Phone You can enter the Phone or Phone2 settings page from > Settings > Personal tab on the Today screen to modify the relevant service settings. Note that the setup values you can change here depend on the services provided by your telephone company.
Page 93: Phone Application Programs
Phone Application Programs Caution Before you can use the functions described in the Phone Group. Make sure that the SIM card is properly installed in your Pocket PC and the Phone is already turned on. If your Pocket PC does not include this function, it means it is not supported and you can skip this chapter.
Page 94 Change Display Mode You can change the display mode of SIM Manager to Standard, SIM1 Contacts, SIM2 Contacts and Outlook Contacts. When switching to SIM1 or SIM2, the full screen display for SIM card phonebook or Contacts will be as shown as per the illustration below. This will enable the phonebook contacts to be easier to read and more precise management can be conveniently performed.
Page 95: Sim Tool Kit
SIM Tool Kit > Programs > SimTKUI (SIM Tool Kit). This screen will list only the service menu offered by SIM1 which you installed in SIM1 slot. This screen is for reference only. The actual screen is based on the service items provided by your telecom company.
Page 96: Sms Sender
SMS Sender > Programs > Phone > SMS Sender SMS Sender is a shortcut for you to directly start editing a new text message and send it out. To send a text message, on message composing screen: 1. Enter the recipient’s number in To field, or tap Menu > Add Recipient to select a person from Contacts.
Page 97: Speed Dial
Speed Dial > Programs > Phone > Speed Dial. Hot Key Switch Tap the box according to the functions provided by the system. Tap to switch between these functions: Frequency Dial → Index Dial. Tools button: Provides the relevant menu. For example, select Settings to set the interface as Frequency Dial or Index Dial.
Page 98 Frequently Dialed Screen Frequency Dial screen Tap any phone entry box to speed dial. You will make a call on the number currently selected by your device. To select the other number, press to enter Phone screen, tap Menu > Phone Dialer Selection Tap and hold the box, then select appropriate command from the...
Page 99 Index Dial Index Dial screen Switch to the Index Dial screen as shown on the left. Tap on any letters. The content displayed are the data created in Contacts. If you did not create any data in Contacts, the screen is blank.
Page 100 4-24...
Page 101: Customize Your Pocket Pc / 5-1 Adjusting Settings
You can adjust the Pocket PC settings according to your personal preferences and install other programs. Adjusting Settings To see available options, tap > Settings > Personal or System tab located at the bottom of the screen. The following utilities allow you to adjust the settings based on your personal work style.
Page 102: Notifications
Notifications Your Pocket PC reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock & Alarms, you’ll be notified in any of the following ways: A message box appears on the screen.
Page 103: Power Preference Settings
Power Preference Settings > Settings > System tab > Power. View the power usage condition or perform the relevant power management settings. Power icon Check this item, so that when you accidentally press the hardware buttons on the Pocket PC, the Pocket PC will not exit the sleep mode.
Page 104: Backlight
Backlight > Settings > System tab > Backlight. 1. Battery Power or External Power tab: Set the relevant backlight functions. 2. Backlight Level tab: Adjust the backlight level.
Page 105: Light Sensor
Light Sensor The unique light sensor within your Pocket PC enhances the accuracy of onscreen view and decreases your eyestrain while saving on more battery life. Based on the ambient light intensity the sensor detected, it will adjust backlight brightness dynamically. The lighter the environment is, the more illumination the device outputs to brighten the screen;...
Page 106: Gravity Sensor
Gravity Sensor The gravity sensor in your Pocket PC is able to recognize its own orientation manipulated by your hand, and would so change the screen orientation accordingly. For example, if you position the device vertically and then turn it into a horizontal orientation, the screen mode will then change from portrait to landscape automatically.
Page 107: Microphone
Microphone Profile Microphone Cause * Voice Turn the volume down and Surrounding Commander find the proper volume setting interference recorded voice control for better recognition of when volume up. system. Speech Turn the volume up. More distance from recording the lecturer more interference recorded.
Page 108: Adjust Volume
Adjust Volume Push the volume control key on the side of the Pocket PC. Or use the stylus to tap the icon on the top of the screen to adjust all program sound functions under . Adjust the incoming call’s volume under 1.
Page 109: Memory Optimization
Memory Optimization > Programs > Utilities > Memory Optimization. Memory Optimization helps you to optimize the memory using in your Pocket 1. Enable the auto-restart option and select the timer. Your Pocket PC will automatically restart. 2. Select the least memory. Your Pocket PC will restart when the memory is less than your settings.
Page 110: Scenarios
Scenarios > Programs > Phone > Scenarios Select an applicable mode. Details button: Set the relevant options for this mode, such as volume, backlight, etc. Tap Details button to enter the screen shown on the left. And then tap Settings button to set the relevant options for this mode, such as volume, backlight, etc.
Page 111: Find And Organize Information
Find and Organize Information The Search feature on your Pocket PC helps you quickly locate information. 1. Tap > Programs > Search. Input the text you want to find and then select the data type. Tap on Search to start the search. 2.
Page 112: Navigation Bar And Command Bar
Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menu names, buttons, and the Input Panel button.
Page 113: Pop-Up Menus
Pop-up menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program.
Page 114: Redefine Hot Keys
Redefine Hot Keys > Settings > Personal tab > Buttons. Button 1 Button 2 These hot keys can be redefined as launch keys for frequently used programs. are exclusive phone functions so they cannot be redefined. 5-14...
Page 115: Synchronization
Windows Vista Part A PC with Windows Vista™ operating system can be used to enable connection ® and synchronize with your Pocket PC. The Windows Mobile Device Center application can be used to manage your Pocket PC, and can provide Pocket PC access to other resources through the connected PC.
Page 116 1. Software installation: You could use the Getting Started CD to install ® Windows Mobile Device Center on the personal computer. 2. Hardware installation: The USB cable is a plug-and-play device. Use the USB cable to connect your Pocket PC to your personal computer. USB Port ®...
Page 117: Windows Xp/2000/98 Part
Windows XP/2000/98 Part A PC with Windows XP/2000/98 operating system can be used to enable ® ® connection and synchronize with your Pocket PC. Using Microsoft ActiveSync synchronize you can the information on your desktop computer with the information on your device. Synchronization compares the data on your device with your desktop computer and updates both computers with the most recent information.
Page 118: Installing And Using Activesync
Installing and Using ActiveSync Important Installation Notice Before you install ActiveSync, make sure that the USB cable on the Pocket PC is not connected to the personal computer. Connect the USB cable only after ActiveSync is installed. 1. Installing ActiveSync: You could use the Getting Started CD to install Microsoft ActiveSync version 4.5 or above on the personal computer.
Page 119 3. Using ActiveSync After installation is complete, the ActiveSync Setup Wizard helps you customize your synchronization settings. Once you use the USB cable to connect the two devices properly, the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements.
Page 120: Faq About Synchronization
FAQ About Synchronization > Settings > Connections tab > USB to PC. 1. Factory setting defaults to checking the box. 2. If you have followed the above installation and operation procedures and find that the connection between your Pocket PC and desktop PC still cannot be established, please uncheck the box shown on the left.
Page 121: Usb Synchronization
USB Synchronization Before you start to synchronize, use the Pocket PC Getting Started CD to install synchronization tools on your personal computer. For more information on how to install, please refer to the Pocket PC Getting Started CD or online help. Synchronization tool is already installed on your Pocket PC.
Page 122 Check the items you want to synchronize. Click Next. Click Finish.
Page 123 After installation is complete, the ActiveSync Setup Wizard helps you connect your Pocket PC to your desktop computer, set up a partnership so you can synchronize information between your Pocket PC and your desktop computer, and customize your synchronization settings. Your first synchronization process will automatically begin when you finish using the wizard.
Page 124: Synchronization Tool On Pocket Pc
Synchronization Tool on Pocket PC Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your Pocket PC. To switch to ActiveSync on your Pocket PC, tap > Programs > ActiveSync. For more information on how to use ActiveSync on your personal computer, run ActiveSync and refer to the ActiveSync online help.
Page 125: Synchronizing Using Bluetooth
Synchronizing using Bluetooth Without using the USB cable to connect the two devices, you can still synchronize using Bluetooth. The greatest advantage is that you don’t have to plug in and detach from the USB cable so often. This is especially useful for managing several Pocket PCs.
Page 126 6-12...
Page 127: Connections
Connecting to the Internet This section teaches you how to use GPRS wireless network connection. GPRS wireless networking is a convenient function for working at home or while traveling. You can use the Pocket PC to browse websites and read or send E-mails, SMS or MSN messages.
Page 128 > Settings > Connections tab > Connection Wizard. 1. Select the country name from the list. 2. Select the carrier name from the list. 3. According to actual requirements, select the carrier name, and then tap Add button or Edit button. Or use the New button to add the new network connection.
Page 129: Setting The Gprs Connection
Setting the GPRS Connection To connect to the Internet or use MMS service, please make sure you have installed SIM card in SIM1 slot and activated Phone1. > Settings > Connections tab > Connections > Tasks tab. 1. As shown in the screen on the left tap “Add a new modem connection.”...
Page 130 3. Input the Access Point Name provided by your service provider and tap Next. 4. Input your personal information such as account number, and tap Finish.
Page 131: Starting Gprs Connection
Starting GPRS Connection 1. Turn on Phone: Tap icon at the top of the screen and tap “Comm. Manager.” Tap and input your PIN to enable GSM. The icon will change to while the icon changes to 2. Tap in the Communication Manager.
Page 132 4. Connect GPRS: Select “Manage existing connections” in Connections. Tap and hold on the newly created connection name, and then select Connect to enable GPRS connection. 5. Input your account information in the Logon Network screen and tap to login to the network.
Page 133: Disconnecting Gprs
Disconnecting GPRS 1. Disconnect GPRS: Tap the message window appears. Tap Disconnect. 2. Turn off Phone: Tap and then “Comm. Manager.” Tap disable GSM. Connections 7-7...
Page 134: Using Bluetooth
Using Bluetooth Bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When the Bluetooth power is turned on, the indicator will blink blue. Bluetooth LED indicator (Blue) 1.Tap launch Communication Manager. 2.Tap enable Bluetooth. Bluetooth capable devices such as the PC, Pocket PC, Bluetooth headset etc.
Page 135: Setup The Bluetooth Connection
Setup the Bluetooth Connection On the Communication Manager screen, tap and hold the button, then release to enter the Bluetooth manager. > Settings > Connections tab > Bluetooth Tap Bluetooth and then Devices tab. 1. Select “Add new device” and the system will begin to search for nearby Bluetooth devices.
Page 136 Note Pair for Bluetooth headset: When the system asks for the password, please refer to the instructions provided with your purchased Bluetooth headset. Pair for PC or Pocket PC: When the system asks for the password, please make sure that the identical password is entered to both devices.
Page 137 4. The screen to the left is during a call. Phone screen during a call will show a headset icon in the upper right corner, the Bluetooth headset will be used to communicate with the callee. Tap Bluetooth > Mode tab. 5.
Page 138 Tap Bluetooth and then COM Ports tab. 7. Follow the onscreen instructions to register the connected Bluetooth device as an effective COM port. 7-12...
Page 139: Internet Sharing
Internet Sharing > Programs > Internet Sharing. This function provides a simulated modem function for the Pocket PC to connect to the PC. The built-in Bluetooth paring or USB port can be connected with the PC and provide Internet access on the PC. 1.
Page 140: Csd Type
CSD Type > Settings > Connections tab > CSD Type. You must first apply for Circuit-Switched Data (CSD) service from your telecom company before you can use this function. In short, this function is similar to the modem dial-up in a personal computer. By simulating the Pocket PC as a modem and connecting through the built-in GSM device, you can use the Pocket PC to access the web.
Page 141: Connecting With A Personal Computer
Connecting with a Personal Computer For more information, refer to “Synchronization” section. Wireless LAN Transmission On the Today screen, tap to launch Communication Manager. For more information, refer to “Using Wireless LAN” section. Wireless LAN LED indicator (Amber) to launch Communication Manager Connections 7-15...
Page 142 7-16...
Page 143: Using Wireless Lan
This section teaches you how to use the Pocket PC’s built-in wireless LAN function to connect to the Internet. It is convenient for you to browse websites and send/receive E-mails through wireless networks at certain locations where wireless networking services are provided. When you purchase credits for connecting to the Internet through a wireless LAN, you will be given the following information: an IP address, DNS name server address, Proxy server, port, and network key, etc.
Page 144: Connecting To Wireless Lan
Connecting to Wireless LAN On the Today screen, tap to launch Comm. Manager. > Programs > Comm. Manager. This icon will show up on your screen whenever your Pocket PC has detected a usable wireless network and has connected to that network, indicating that your Pocket PC has successfully connected to the network hotspot...
Page 145: Configure Your Wireless Network
Configure Your Wireless Network WLAN Setup Scenarios Network key or Location Select Networks Proxy Connection Access Point Home 1. Close Proxy 1. Authentication: > Settings > connection Select Open Connections tab > 2. Not required to 2. Data Encryption: Connections > Advanced set Proxy Select WEP to tab, Select Networks...
Page 146: Configure Your Wireless Network (Normal Setup)
Configure Your Wireless Network (Normal Setup) You will need a correct IP address; DNS name server address, Proxy server, and connection port number to setup your connection. If you have purchased a wireless Internet service account, then the service desk at the location where you will be connecting will provide you with this information, or, you should obtain this information from the network administrator of your company.
Page 147 4. As shown on the left, make sure that My Work Network is selected for both items, and finally tap to save and exit. My Work Network is the WLAN connection method. As this option is from a choice of two, the next time you need to use the GPRS connection, you will have to refer to the above listed steps,...
Page 148 7. Set accordingly to the rules and information provided by the hotspot location. Authentication: Select Open Data Encryption: Select WEP to enable the entry bar about Network key Network key Key index 8. Tap and hold on the name of the network connection that you can currently use, then select Connect.
Page 149: Configure Your Wireless Network (Proxy Setup)
Configure Your Wireless Network (Proxy Setup) To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company’s network administrator.
Page 150 The above is applicable to an office environment that requires a Proxy setup. For others that close the proxy connection, please do not check the box named “This network connects to the Internet” and skip the following procedures. 3. Enter the name into the “Proxy server” field. 4.
Page 151: Emails And Messages
Message Accounts Messaging is where you can manage all message types including SMS (Short Messaging Service), MMS (Multimedia Messaging Service) and E-mail accounts. To use these services, please connect your device to a network connection. > Messaging. On account picker screen, select the messaging service you want to use. Tap to enter Messages Tap to enter an E-mail accounts ou have established.
Page 152 Note To use MMS and E-mail, please: 1. Apply wireless service from your service provider 2. Activate this SIM in SIM1 slot 3. Go to > Settings > Connections tab > Connections to set up the network settings. 4. On the Today screen, tap and turn on Data Connection by tapping SIM2 slot allows only the SMS service provided by the SIM card you install in it;...
Page 153: Text Messages
Text Messages Reading Received Text Messages > Messaging, On Messaging screen, tap Messages. To read received messages, tap , and select the sub folder Inbox under ▼ Messages. Emails and Messages 9-3...
Page 154 In Inbox, you can tap and hold a message to open a list of actions; you may Delete, Reply to or Forward this message. To sort the messages by sender or received time, tap Menu > Tools > Sort By and then choose the sort method.
Page 155: Creating A Text Message
Creating a Text Message 1. On Messaging screen, tap Messages > Menu > New > Text Message 2. In To: filed, enter the number of recipient or tap Menu > Add Recipients to select a contact. If there is more than one contact, use a semi-colon (;) to separate them.
Page 156 Note If the SIM card you select is not activated, a notice “Send failed” will pop up.
Page 157: Multimedia Messages
Multimedia Messages Reading MMS Messages > Messaging > Messages. In Inbox, tap on a single MMS message to view it. Use the playback controls: Play, Pause or Resume to view the message. To save the objects attached to this MMS message: 1.
Page 158: Creating An Mms Message
Creating an MMS Message On Messaging screen, tap Messages > Menu > New > Multimedia Message Select an MMS template to compose a new MMS message. Or tap the envelop icon to open your own blank message. On an MMS composing screen, you may tap: Bcc / Cc / To field to add recipients.
Page 159: E-Mails
E-mails This section explains the basic preparations and processing principles. If you have any questions, refer to online help about Pocket PC or synchronization. Use Messaging to send and receive E-mails messages in either of these ways: 1. Send and receive e-mail messages by connecting directly to an e-mail server through an Internet service provider (ISP) or a network.
Page 160: Synchronizing E-Mail Messages
Synchronizing E-mail Messages If you want to synchronize e-mails with company or home usage, please refer to this section. E-mail messages can be synchronized as part of the general synchronization process. You will need to enable Inbox synchronization in synchronization tools. For information on enabling Inbox synchronization, see Help on the desktop computer.
Page 161: Connecting Directly To The Mail Server
Connecting Directly to the Mail Server For single-machine use, not combining office and home E-mails, please refer to “E-mail Server Setup” section. You will receive messages directly from the mail server. This is irrelevant to personal computer use. You can work online or offline. When working online, you read and respond to messages while connected to the e-mail server.
Page 162: E-Mail Server Setup
E-mail Server Setup Refer to this section if you are preparing for single-machine use and not combining office and home E-mails. If you already have an E-mail account from your ISP or company network, you can use Messaging to send and receive mails and messages.
Page 163 3. Follow the instructions on the screens to setup the E-mail account. 4. Refer to “Connecting to the Internet” section or “Using Wireless LAN” section to connect the Pocket PC to the Internet and you can start sending and receiving E-mails and SMS messages. 5.
Page 164: Sending / Receiving E-Mails
Sending / Receiving E-mails Sending E-mails Tap Menu and then New to compose a message and then tap Send to send it. Tap To, Cc or Bcc to open the Contacts screen. As long as you have set up Contacts beforehand, you can just tap to select. Tap the data area to input the E-mail adress, mobile phone number and subject directly.
Page 165 Reading and replying E-mails Receive new mails by tapping Menu and then Send/Receive. Switch to the Inbox folder and tap to open. Changing preference settings Set the Inbox Synchronization option in synchronization tools. > Messaging > Menu > Options, and then the Accounts, Message tabs on the Pocket PC to set the appropriate options.
Page 166: Direct Push Technology Alert
Direct Push Technology Alert The Direct Push Technology alert function will enable you as a corporate user to never miss another e-mail, using the Pocket PC for the best business service. Through the synchronization feature, your Pocket PC can instantly and automatically receive important e-mails from Microsoft Exchange Server.
Page 167 2. Obtain the e-mail, server address, user name, network etc. from the company network administrator to successfully setup the server data. 3. Tap Menu and then Schedule. The Peak times and Off-peak times provide a As items arrive option, this is the direct push technology alert function.
Page 168: Windows Live™ Messenger
Windows Live™ Messenger To switch to Windows Live™ Messenger, > Programs > Messenger. Windows Live™ Messenger on your Pocket PC is an instant messaging program that lets you: See who is online. Send and receive instant messages. Have instant message conversations with groups of contacts. For more information on using Windows Live™...
Page 169: Setting Up
Setting Up The first time you use: Tap > Program > Messenger. On the Today screen, tap Messenger to display the Windows Live™ Messenger sign-in screen. Before you can connect, you must enter Passport or Exchange account information. 1. Choose Messenger from >...
Page 170: Working With Contacts
Working with Contacts If you already use Windows Live™ Messenger on your desktop computer, your contacts will show up on your Pocket PC without being added again. The Windows Live™ Messenger window shows all of your messenger contacts at a glance, divided into Online and Offline categories, or sorted by groups. From this view, while connected, you can chat, send an e-mail, block the contact from chatting with you, or delete contacts from your list using the pop-up menu.
Page 171: Chatting With Contacts
Chatting with Contacts Tap a contact name to open a chat window. View full chat. Enter your message in the text entry area, and tap Send. Return to the contacts list, and select a contact to chat with. The contact you are chatting with. Provides the relevant menu.
Page 172 9-22...
Page 173: Multimedia
Using Camera Pocket PC Exterior and Camera Front and Sides Rear Multimedia 10-1...
Page 174 1. MicroSD card slot 2. Camera hotkey, camera shutter, camcorder button 3. Activate or disable the flash or 4. Quit Camera spotlight 5. Digital zoom 6. Switch to other camera or camcorder modes 7. Select the storage location 8. Select front or rear camera lens 9.
Page 175: How To Use The Camera
How to Use the Camera? Notes For example, to take a self-portrait, face the light source and avoid dark surroundings or your back to the light source for better results Press the button on the Pocket PC. > Programs > Multimedia > Camera. Action Instructions Scenery or Portrait...
Page 176 Action Instructions Scenery or Portrait 4. If you are in the camera mode from the (Default) guidance wizard, pressing the camera shutter will link you to the applications. For more information about the provided tools, please refer to the later descriptions. 5.
Page 177 Video Instructions Video 1. Switch to the video mode. 2. Face the Pocket PC toward you. 3. If the screenshot is good, press the camcorder key on the side of the Pocket PC to begin filming. 4. During filming, you will see a red dot and flashing numbers of time lapsed at the upper left of the screen.
Page 178 Video Instructions Video 5. Press the camcorder key again to stop filming. If you are in the video mode from the guidance wizard, stopping filming will link you to the applications. For more information about the provided tools, please refer to the later descriptions.
Page 179: Common Tools For Camera
Common Tools for Camera The Camera can be used to take pictures or videos. This chapter will introduce the common tools for camera and icons on the screen. The previous chapter introduces hardware hotkeys on the Pocket PC that can also control some of the tool icons shown on the screen.
Page 180 Camera Modes button to switch to other camera modes. Camera Mode Description Normal camera mode. Camera mode with picture frame. to select picture frame or background. Camera mode with GPS information. becomes to white icon after the GPS position is fixed. 10-8...
Page 181 Camera Mode Description “Continuous Shot” camera mode. to select the number of shots. Multimedia 10-9...
Page 182: Common Tools For Camcorder
Common Tools for Camcorder The Camera can be used to take pictures or videos. This chapter will introduce the common tools for camcorder and icons on the screen. The previous chapter introduces hardware hotkeys on the Pocket PC that can also control some of the tool icons shown on the screen.
Page 183 Camcorder Modes button to switch to other camcorder modes. Camcorder Mode Description Normal camcorder mode. MMS camcorder mode. Multimedia 10-11...
Page 184: Advanced Setup For Camera Or Camcorder
Advanced Setup for Camera or Camcorder Tap the onscreen to open the advanced setup screen for the Camera. Tap to show the corresponding options for the function. Options. Flick to scroll l up or down to see the options if the number of items exceeds a screen displaying.
Page 185 Camera Camcorder Descriptions Select the resolution, higher resolutions lead to larger files. Select the environment lighting (white balance). Adjust for fluorescent light frequency. Activate “self-timer;” a specific length of time can be set for “self-timer.” Activate or disable the flash or spotlight. Activate or disable the audio.
Page 186 Important Hints 1. When the “--” is shown, this indicates that the function is not supported under this mode. 2. When the camera lens is set to face the front, for example when you want to have a self portrait, the picture frame function will not be available. 3.
Page 187: Album
Album > Programs > Multimedia > Album. You can use Album to manage and view multimedia information such as pictures, music, and videos. Preview Album Information Display the folder name you are browsing. Select the sort order for the list. Preview thumbnails, which are arranged in the sort order you set.
Page 188 Tap a thumbnail to see the picture at full screen. Flick to scroll left or right to browse the previous or next picture. If you enable the “Gravity Sensor Screen Orientation,” you can turn your Pocket PC sideways to view the picture in landscape orientation.
Page 189: Slideshow Settings
to zoom in a picture. In the zoom-in mode, the smaller frame shown left is part of the picture what you see on the screen. Flick to scroll left, right, up or down to view the part of picture exceeding the screen. Tap outside the pop-up menu to abort it.
Page 190: Namecard Manager
Namecard Manager > Programs > Multimedia > Namecard Manager. Provides full name cards management for scanning paper name cards into a digital format. The contacts database from Pocket PC can also be integrated into a unified contacts book. Digitize New Name Cards 1.
Page 191 3. Take pictures Prepare a name card and adjust the position. Press the shutter to the side of the Pocket PC to take the shot. You can directly select on the screen to take a picture. 4. Name card recognition Select Language to choose the appropriate language for this name card.
Page 192 5. Modify the name card’s contents and confirm Select the contents field to make modifications. When selecting the contents field, the name card source will be shown for verification. Double tap on the name card area to zoom to the max viewing. Select the field name to modify and adjust the error recognitions.
Page 193: Name Cards Management
Name Cards Management 1. Tap Manage. 2. Main screen for name card management Only recognized name cards will be shown here. Enter the quick search page. Tap a letter and the results for name cards created in Namecard Manager will be shown. Delete the entered text to the left.
Page 194 Name card index display area, select an entry to expand its contents. Display area for the original name card. Provides the relevant menu. New: Create a new digital name card. Import: Supported format includes BMP, JPG, and PNG. An existing name card image file can be imported and then processed.
Page 195: Companion Programs
® Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Messaging, and Notes. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Messaging. Using synchronization tools, you can synchronize information in Microsoft Outlook or Microsoft Exchange on your desktop computer with your Pocket PC.
Page 196 Calendar: Scheduling Appointments and Meetings Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Agenda, Day, Week, Month, and Year) and easily switch views by using the View menu. Tap to go to today.
Page 197: Create An Appointment
Create an Appointment Tap to return to the calendar (the appointment is saved automatically). Tap to choose from predefined text. Tap to choose from previously entered locations. Tap to select a time. Tap to select a date. Notes is a good place for maps and directions.
Page 198: Use The Summary Screen
Notes If you select Remind me in an appointment, your Pocket PC will remind you according to the options set in > Settings > Personal tab >Sounds & Notifications. Use the Summary Screen When you tap an appointment in Calendar, a summary screen is displayed. To change the appointment, tap Edit.
Page 199: Schedule A Meeting
Schedule a Meeting 1. Create an appointment. 2. In the appointment details, hide the input panel, and then tap Attendees. 3. From the list of e-mail addresses you’ve entered in Contacts, select the meeting attendees. The meeting notice is created automatically and placed in the Outbox folder. For more information on sending and receiving meeting requests, see Calendar Help and Messaging Help on the Pocket PC.
Page 200: Contacts
Contacts Contacts maintains a list of your friends and colleagues, in which you can easily manage or find their information on this device. To enter Contacts screen, tap > Contacts. Contact entry stored on SIM1 card. Contact entry stored on SIM2 card. Contact entry stored as Outlook Contact on your device.
Page 201: Managing Your Contacts
To show all contacts again, select All Contacts. To view a contact not assigned to a category, select No Categories. To look for SIM2 contacts, check SIM2 Contacts to sort out the contacts stored on SIM2. 3. To view the names of companies your contacts work for, in the contact list, tap Menu >...
Page 202: Creating A Contact
Creating a Contact 1. On Contacts screen, tap New, and then select a contact type. To create a contact on your device, select Outlook Contact, hereafter you can manage this contact even if the SIM card is absent. To create a contact on either SIM1 or SIM2 card, select SIM Contact or SIM2 Contact.
Page 203: Using The Summary Screen
Using the Summary Screen When you tap a contact in the contact list, a summary screen is displayed. View contact details. All of the available contact information is listed, you can tap and use easily. Provides the relevant menu. For example, select Edit to change the contact information.
Page 204: Tasks: Keeping A To Do List
Tasks: Keeping a To Do List Use Tasks to keep track of what you have to do. Indicates high priority. Tap to display or edit the task details. Tap and hold to display a pop-up menu of actions. Tap to change the status. Provides the relevant menu.
Page 205: Create A Task
Create a Task 1. Tap Menu and then New Task. 2. Using the input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields.
Page 206: Use The Summary Screen
Use the Summary Screen When you tap a task in the task list, a summary screen is displayed. To change the task, tap Edit. View task details. Tap to show and hide additional summary information. View notes. Tap to change task. 11-12...
Page 207: Notes: Capturing Thoughts And Ideas
Notes: Capturing Thoughts and Ideas Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it will be included in the note as an icon.
Page 208: Create A Note
Create a Note 1. Tap New. 2. Create your note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see “Enter Information on Your Pocket PC.” Tap to return to the note list (the note is saved automatically).
Page 209: Word Mobile
Word Mobile Word Mobile works with Microsoft Word on your desktop computer to give you easy access to copies of your documents. You can create new documents on your Pocket PC, or you can copy documents from your desktop computer to your Pocket PC.
Page 210 Select the type of folder you want displayed in the list. Tap to change the sort order of the list. Tap to open a document. Tap and hold an item to see a pop-up menu of actions. Tap to create a new document. Notes You can change the zoom magnification by tapping View and then Zoom.
Page 211 Using the input panel, enter typed text into the document. For more information on entering typed text, see “Enter Information on Your Pocket PC.” To format existing text and to edit text, first select the text. You can select text as you do in a Word document, using your stylus instead of the mouse to drag through the text you want to select.
Page 212: Excel Mobile
Excel Mobile Excel Mobile works with Microsoft Excel on your desktop computer to give you easy access to copies of your workbooks. You can create new workbooks on your Pocket PC, or you can copy workbooks from your desktop computer to your Pocket PC.
Page 213 Excel Mobile provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering. To display the toolbar, tap View and then check Toolbar. Cell contents appear here as you enter them. Select cell contents for the resource of chart. Insert Chart button AutoSum button Zoom button Tap Format Chart button to...
Page 214: Tips For Working In Excel Mobile
Tips for Working in Excel Mobile For more information on using Excel Mobile, tap > Help. Note the following when working in large worksheets in Excel Mobile: View in full-screen mode to see as much of your worksheet as possible. Tap View and then check Full Screen.
Page 215: Powerpoint Mobile
PowerPoint Mobile View PowerPoint slides created in PowerPoint 97 and above versions on your desktop computer. The supported formats include .ppt and .pps files. Select the type of folder you want displayed in the list. Tap to change the sort order of the list.
Page 216: Windows Media Player
Windows Media Player Use Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your Pocket PC or on a network. To switch to Windows Media Player for Pocket PC, tap > Programs > Windows Media. Use full-screen to view video.
Page 217 Use Microsoft Windows Media Player on your desktop computer to copy digital audio and video files to your Pocket PC. For more information about using Windows Media Player for Pocket PC, tap > Help. Companion Programs 11-23...
Page 218: Streaming Player
Streaming Player > Programs > Streaming Player. Some audio and movie files that cannot be played back from Microsoft Windows Media Player, for example RTSP, HTTP… types of files, will be automatically switched to Streaming Player by the system. Automatically launch the Streaming Player for playback when using Internet Explorer to run media files not supported by...
Page 219: Internet Explorer
Internet Explorer Using Internet Explorer ® Use Microsoft Internet Explorer Mobile to view Web or WAP pages in either of these ways: During synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop computer.
Page 220: Browse The Internet
Browse the Internet Refer to “Connecting to the Internet” section to connect the Pocket PC to the Internet and start browsing websites. 1. Tap > Internet Explorer. 2. Input the site address into the address bar at the top of the screen and connect to this site.
Page 221: The Mobile Favorites Folder
View Mobile Favorites and Channels Tap the favorite you want to view. Tap to add or delete a folder or favorite link. 1. Tap the Favorites button to display your list of favorites. 2. Tap the page you want to view. You’ll see the page that was downloaded the last time you synchronized with your desktop computer.
Page 222: Favorite Links
Favorite Links During synchronization, the list of favorite links in the Mobile Favorites folder on your desktop computer is synchronized with Pocket Internet Explorer on your Pocket PC. Both computers are updated with changes made to either list each time you synchronize. Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your Pocket PC, and you will need to connect to your ISP or network to view the content.
Page 223 5. Synchronize your Pocket PC and desktop computer. Mobile favorites that are stored in the Mobile Favorites folder in Internet Explorer are downloaded to your Pocket PC. Notes If you did not specify an update schedule in step 3, you will need to manually download content to keep the information updated on your desktop computer and Pocket PC.
Page 224 11-30...
Page 225: Maintaining The Pocket Pc
Backup Utility > Programs > Utilities > Backup Utility. Backup Utility is used to back up or restore files saved in the Pocket PC. You can back up personal data such as Calendar, Contacts, Tasks, Personal profile, Network settings, Messaging (E-mails and SMS), etc. Storage Space When making backups, you can choose the following storage spaces: 1.
Page 226: Backup Files
Backup Files Wizard Mode Tap Backup. Next button and the Wizard will guide through the steps that follow. Standard: Switch to the Standard mode. Standard Mode Backup your personal data to a storage space. Tap the Backup tab. Tap to check the items for backup.
Page 227: Advanced Settings Options
Advanced Settings Options Under the Backup Files screen, tap Advanced button to enter the Advanced settings screen as shown below. Check the options as required. If you check this option, the Wizard will guide you through the steps to complete the operation the next time you open Backup Utility.
Page 228 If you checked “Auto backup on schedule,” tap to enter the screen shown on the left. Backup frequency. Tap the date button on the right of “Starting” to set the starting date. Tap the time button on the right of “Starting” to set the starting time.
Page 229: Restore Files
Restore Files Caution! 1. When restoring files, the system will delete all current data in the Pocket PC and replace it with the backup files. 2. To make sure that files can be restored successfully, do not use the Pocket PC while performing restore.
Page 230 Standard Mode Restore the backup personal data from a storage space. Tap the Restore tab. Select “Latest” below “Restore From.” Or select from the list. Tap backup file name from the list under “File Name.” Restore button to start restoring. 12-6...
Page 231: Adding Or Removing Programs
Adding or Removing Programs Programs added to your Pocket PC at the factory are stored in ROM (read-only memory). You cannot remove this software, and you’ll never accidentally lose ROM contents. All other programs and data files added to your Pocket PC after factory installation are stored in RAM (random access memory).
Page 232: Add A Program Directly From The Internet
5. Double-click the *.exe file. If the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your desktop computer, the installer will automatically transfer the software to your Pocket If the file is not an installer, you will see an error message stating that the program is valid but it is designed for a different type of computer.
Page 233: Add A Program To The Start Menu
Add a Program to the Start Menu > Settings > Personal tab > Menus. Check the box for the program. If you do not see the program listed, you can either use File Explorer on the Pocket PC to move the program to the Start Menu folder, or use synchronization tools on the desktop computer to create a shortcut to the program and place the shortcut in the Start Menu folder.
Page 234: Remove Programs
Using synchronization tools on the desktop computer: Use the Explorer in synchronization tools to explore your Pocket PC files and locate the program. Right-click the program and then click Create Shortcut. Move the shortcut to the Start Menu folder in the Windows folder. The shortcut now appears on the menu.
Page 235: Manage Memory
Manage Memory View Memory Status > Settings > System tab > Memory. Tap the Main tab. The status of Storage and Program memory. Find: Quick link to the Search program. Tap the Storage Card tab. Current storage card memory status. Tap to select the built-in or external storage card.
Page 236: Find Available Memory
Find Available Memory Under certain circumstances such as insufficient memory, the Pocket PC cannot allocate memory automatically. Try to solve this problem through the following methods: > Programs > Search. 1. To find files occupying larger amounts of memory, select “Larger than 64 KB”...
Page 237 > Messaging > Menu > Tools > Options > Storage tab. Check “Store attachments on storage card” to save attached files from E-mails automatically in the storage card in future. > Internet Explorer > Menu > Tools > Options > Memory Tap Clear History and Delete Files to delete records of websites that you have browsed.
Page 238 > Programs > Notes/Word Mobile/Excel Mobile > Menu > Options. 1. Enter the Notes file list screen. 2. Tap Menu and then Options. 3. Tap the “Save to” function button and select SDMMC from the list. This indicates that you are using your external storage card.
Page 239: System Information
System Information > Settings > System tab > System Information. or ─ to display or hide the system information. To find detailed information of your SIM cards, tap infront of “Wireless module” to expand the category, and tap the SIM card you desire to look at.
Page 240 12-16...
Page 241: Voice Commander
> Programs > Voice Commander. Voice Commander is continuous voice recognition application software in the Pocket PC. Voice Commander allows the user to use their own voice to dial and control functions. Voice Commander has the following features: Fully voice-controlled system that allows the user to complete operations (such as dialing phone or running applications) quickly without using hands.
Page 242: Starting Voice Commander
Starting Voice Commander Here are two methods for running Voice Commander: 1. Tap > Programs > Voice Commander > Voice Commander. 2. Voice Commander key. The system sets the button on the Pocket PC as the exclusive “Voice Commander” button. Just press this key to run Voice. Show the format of voice command.
Page 243: Voice Command Format
Voice Command Format Press the Voice Commander button on the Pocket PC and enter the Voice Commander screen. Voice Name dialing Usage: Call <Contact> at <Home/Work/Mobile> Call Jennifer Lopez Example 1: Call Jennifer Lopez at mobile Example 2: Voice Show Contact Usage: Show <Contact>...
Page 244 Tips All the names in Contacts will automatically become recognizable contacts in the “Voice dialing” syntax. However, if the number of contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these entries to Voice Commander for recognition, tap Menu > Settings or run Voice Commander Settings to check and add these contacts manually for voice recognition.
Page 245: Voice Commander Settings
Voice Commander Settings There are two ways to run Voice Commander Settings: > Programs > Voice Commander > Voice Commander Settings. Tap Menu > Settings while using Voice Commander. Voice Commander Settings allows the user to personalize the Voice Commander settings, add and remove contacts or applications within the recognition range, record voice tags or play commands to prompt the user on how to say the correct command.
Page 246 Play button: Play the recorded voice tag for this contact and hear how it is pronounced. Build button: Record the voice tag for this contact again. During the recording, tap Cancel button to cancel recording. Delete button: Delete the voice tag for this contact. Contacts tab: Sets the voice commands for Contacts.
Page 247 Tips You can choose which Contacts are to be added to the recognizable range of the Voice Commander. By default, the system automatically adds all names within the recognizable range. If the number of Contacts exceeds 1000 entries, the system will not recognize the excessive entries.
Page 248: Application Settings Page
Application Settings Page Tap Voice Commander Settings > Application tab and the Settings page will list the applications and settings installed by the Pocket PC on and then Programs (whether or not it is selected, with or without voice tag). You can choose which applications are to be added to the recognizable range of the Voice Commander.
Page 249 Play button: Play the recorded voice tag for this application and hear how it is pronounced. During the recording, tap Build button: Record the voice tag for this application again. Cancel button : Tap to cancel recording. Delete button: If there is a Lips icon, the voice tag for this application can be deleted and restored to the default system voice.
Page 250: Music Settings Page
Music Settings Page Tap Voice Commander Settings and then the Music tab, the settings page will list the music files and configuration status of the specify folder in your Pocket PC or on your storage card. If you add a new music file, the system will update in real-time, automatically adding the file to your recognizable range, saving you the time of searching for your music files.
Page 251 Check box function If the music file name is checked, it can be identified normally. If unchecked, this indicates that it is not within the recognizable range. If the check box is gray and cannot be checked, this indicates that the item is unrecognizable. Build a voice tag to add a gray item into the recognizable range.
Page 252: Digit Training Page
Digit Training Page Tap Voice Commander Settings and then the Digit Training tab. This function trains a set of personal voice model to increase accuracy in recognition for users with heavier accents. : Voice tag is built. : Current digit to be recorded. Check “Use adapted model”...
Page 253 Tips As long as you have completed recording, then you can check “Use adapted model” to use the personal model tailored made for you. It is recommended that you recite all 10 sets of numbers so the adaptation effect is more obvious. If you do not want to use the adapted model, then just uncheck “Use adapted model.”...
Page 254: Digit Settings Page
Digit Settings Page The digit setting is for voice recognition. The “Length of phone number” setting specifies the maximum number of digits that can be entered as the phone number. These settings will improve recognition accuracy. There are three fields in this screen, you can set different lengths in the three fields respectively.
Page 255: Advanced Settings Page
Advanced Settings Page Sensitivity: When you use this setting, the voice recognition system is not as strict while performing voice recognition tasks, in other words, under this setting the system will respond to your voice most of the time and you won’t have many non-responsive situations.
Page 256: Faq
Question: I want to make a call to my friend Andy Miller, but I’m tired of reading manuals. What do I need to know if I just want to make phone calls? Answer: Make sure you have Andy Miller’s name and phone number in the contact database.
Page 257 Question: I performed digit training today, but I found that the accuracy is worse than before, what do I do now? Answer: You can retry the digit training again in a “quiet” place. And if it still doesn’t help, disable the adapted model and use the default one. To disable the adapted model, tap Voice Commander Settings, the Digit Training tab, and then uncheck “Use adapted model.”...
Page 258 13-18...
Page 259: Specifications
Item Description ® Operating system Windows Mobile 6.1 Professional Processor Samsung SC3 6400, 533MHz Memory 256MB ROM, 128 MB RAM Display 2.8" VGA, 65,536 colors TFT-LCD touch window(640 x 480) 3.5G Communication HSDPA / UMTS (2100/1900/850 MHz) Quad-Band GSM：850/900/1800/1900 MHz EDGE class 10/GPRS class 10 2.75G GSM/GPRS Tri-Band(900/1800/1900)
Page 260 Design and specifications are subject to change without notice. Item Description Interface/Audio Built-in microphone and speaker External stereo headset jack Interface/Data USB Sync Power supply Battery: 1530 mAh Li-Ion Polymer, rechargeable, replaceable AC Adapter: 100~240 VAC/50~60 Hz, 5V/1A DC Environmental Daily operation: 0°c ~ 40°c;...
Page 261: Regulation Notice And Safety Declaration
Your device contains a radio transmitter and receiver, and it is designed, manufactured and tested not to exceed the radio frequency exposure limitations recommended by international guidelines. The maximum SAR values for DX900 are: 0.831 W/kg @10g (GSM 900) 0.373 W/kg @10g (GSM1800) 0.492 W/kg @10g (WCDMA 2100)
Page 262: Health And Safety Information
Health and Safety Information Electrical and Battery Safety Please use ONLY accessories approved by the manufacturer. Any battery, AC adapter or cable of which authenticity is not verified by authorized service point or dealer (even if similar to original product in appearance or specifications) should not be used with your Pocket PC.
Page 263 Do not use ordinary pen or any object with a sharp tip to tap the Pocket PC cover or screen (LCD panel) to avoid damaging and scratching the surfaces. Do not use corrosive or volatile liquids to wipe the Pocket PC. If necessary, use a soft cloth or tissue to wipe the Pocket PC.
Page 264 Safety in airports, medical facilities, and inflammable environments When aboard an aircraft, at a medical facility, or at the gas pump where wireless communication devices are prohibited, please launch the Communication Manager and then tap the button. When the color of the icon turns orange , the Flight Mode is activated and the wireless connection of the Pocket PC is disabled.
Page 265 Explosive Atmospheres When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and user should obey all signs and instructions. Sparks in such areas could cause an explosion or resulting in bally injury or even death.
Page 266: Regulatory Notices
Regulatory Notices Agency identification numbers For regulatory identification purposes, your product is assigned a model number of DX900. To ensure continued reliable and safe operation of your Pocket PC, use only the accessories listed in this document. This product is intended to be charged only from an approved battery charger (rated 5V DC, 1A).
Page 267 ETSI EN 300 328 V1.7.1 – Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide-band transmission systems; Data transmission equipment operating in the 2.4 GHz band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE directive. ETSI EN 301 489-1 V1.6.1 - Electromagnetic compatibility and Radio spectrum Matters (ERM);...
Page 268 EN 50360 – 2001 – Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz ~ 3 GHz). 15-8...
Page 269: Weee Notices
WEEE Notices The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life. The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes of as to reduce disposal.
Page 270 15-10...
Page 271: Faq
1. What features does the Pocket PC have? Answer: Capability of carrying dual SIM cards. Built-in 802.11b/g wireless networking module. ® The latest Windows Mobile 6.1 Professional operating system, with all its settings stored on a Flash ROM. You won’t have to worry about losing your data even if the Pocket PC runs completely out of power.
Page 272 3. My Pocket PC cannot boot. What should I do about it? Answer: Make sure the Pocket PC battery you use still has enough power. Plug your Pocket PC into the charger, and make sure the red charging indicator lights up. Press the POWER button. 4.
Page 273 5. Why doesn’t my Pocket PC make any sound? Answer: Tap the speaker icon on the top right of the screen, then select the volume control options, or adjust the volume of the incoming call sound. Alternatively, you may use the volume control key to control the volume. 6.
Page 274 8. The characters on the screen are too small to read. How can I enlarge them? Answer: Tap > Settings > System tab > Screen > Text size tab. You may adjust the text size as you wish. Also, you may select the landscape orientation in the General tab screen.
Page 275 11. My Pocket PC's Activesync cannot be executed or make a connection. What should I do about it? Answer: Make sure you have installed Activesync version 4.5 or above. The companion CD contains the software. If you have lost the CD, you may download it from the Microsoft Website.
Page 276 16-6...
Page 277: Index
Bubble Breaker · 2-7 Built-in camera lens · 1-3 3.5 G video telephony · 4-1 Buttons · 2-9, 5-14 About · 2-10 Calculator · 2-8 AC Adapter · 1-1 Calendar · 2-7, 11-2 Accounts · 9-1 Call History · 4-9 ActiveSync ·...
Page 278 Create a Task · 11-11 Find Information · 5-11 Create an Appointment · 11-3 Finding a contact · 11-6 Creating a contact · 11-8 Flashlight LED · 1-3 Creating a text message · 9-5 Flight mode · 2-22 Creating an MMS Message · 9-8 Fully charge the battery ·...
Page 279 Location SMS · 2-7, 3-7 Owner Information · 2-9 Lock · 2-9 Phone · 2-9, 4-1 Making a call · 4-6 Phone Receiver · 1-2, 4-2 Memory · 2-10, 12-11, 14-1 Phone Speaker · 1-2, 4-2 Menus · 2-9, 12-9 Phone1 ·...
Page 280 Satellite Navigation · 3-1 Stylus holder · 1-3 Scenarios · 5-10 Synchronizing E-mail · 9-10 Screen · 2-1, 2-10 System Information · 2-10, 12-15 Search · 2-8, 5-11, 12-12 Select a Drawing · 2-31 Tap · 1-14 Select Writing · 2-29 Tap and hold ·...
Page 281 Voice Commander Button · 2-33 Windows Media · 2-8, 11-22 Voice Commander hot key · 13-2 Windows Media Player · 11-22 ® Voice Commander Settings · 2-7, 13-5 Windows Mobile Device Center · 6-1 Volume control key · 1-2 Wireless LAN · 7-15, 8-1 Word Mobile ·...
Page 282 First Version: January 2009 Current Version: April 2009, Version 2 Number: 20090331...

Acer DX900 User Manual

Getting Started

2 Using the Pocket PC

Voice Command and Satellite Navigationavigation / 3-1 NAVIGATION DEVICE

4 Using the Phone /

Customize Your Pocket PC / 5-1 ADJUSTING SETTINGS

Synchronization

Connections

Using Wireless LAN

Emails and Messages

Multimedia

Companion Programs

Maintaining the Pocket PC

Voice Commander

Specifications

Regulation Notice and Safety Declaration

Faq

Index

Quick Links

Related Manuals for Acer DX900

Summary of Contents for Acer DX900