Cisco 7914 Phone Manual page 8

Cisco ip phone expansion module 7914

Hide thumbs Also See for 7914:

Table of Contents

Use a flat head screwdriver to carefully push on one of

Step 5

the foot pins to release it. Then carefully push on the

other foot pin to release it.

Note

Lift off the footstand and store it separately.

Step 6

Connect the Support Bar to the Cisco IP Phone

Refer to Figure 3 and the steps that follow.

Figure 3

Connecting the Support Bar

Position the support bar on the back of the

Step 1

Cisco IP Phone so that it fits flush with the phone.

Locate the two connector pins.

Step 2

Use a flat head screwdriver to carefully push each of the

Step 3

connector pins so that the support bar is firmly fastened

to the Cisco IP Phone.

You may have to lift and hold the

Cisco IP Phone to support it when pushing the

foot pins. When pushing on the footpins, push

away from your body.

Table of Contents

Show Quick Links

Table of Contents