Epson TM-T88V Technical Reference Manual page 107
Hide thumbs
Also See for TM-T88V:
- User manual (122 pages) ,
- Technical reference manual (112 pages) ,
- Development manual (30 pages)
Table of Contents
Advertisement
XON/XOFF
When XON/XOFF control is selected, the printer transmits the XON or XOFF signals as follows.
The transmission timing of XON/XOFF differs, depending on the setting of DIP switch 2-1.
Signal
XON
1) When the printer goes online after turning on the power (or
reset using the interface)
2) When the receive buffer is released from the buffer full state
3) When the printer switches from offline to online
4) When the printer recovers from an error using some ESC/POS
commands
XOFF
5) When the receive buffer becomes full
6) When the printer switches from online to offline
Code
The hexadecimal numbers corresponding to the XON/XOFF codes are shown below.
• XON code: 11H
• XOFF code: 13H
• When the printer goes from offline to online and the receive buffer is full, XON is not
transmitted.
• When the printer goes from online to offline and the receive buffer is full, XOFF is not
CAUTION
transmitted.
• When DIP switch 1-3 is off, XON is not transmitted as long as the printer is offline, even
if a receive buffer full state has been cleared.
Printer status
Appendix
DIP switch 2-1
1 (ON)
0 (OFF)
Transmit
Transmit
Transmit
Transmit
—
Transmit
—
Transmit
Transmit
Transmit
—
Transmit
107
Hide quick links:
Advertisement
Table of Contents
