Table of Contents
Advertisement
TOSHIBA
Toshiba DP5000-Series Digital Telephones
Product Summary
Toshiba's next generation digital telephones are here. The DP5000 product line offers a sleek, low-profile
design with a stylish tilt stand, an integrated headset interface and a full set of display and call handling
features making Toshiba the obvious choice in leading-edge digital telephones. Toshiba continues to be
proud of its backward compatibility allowing customers a new look on their desktop while maintaining much
of their initial telephone system investment.
The most noticeable enhancements are the backlit displays, updated button placement and a high-end
model with LCD key strips.
The telephone models are referenced by the total number of keys that are on the telephone (excluding the
dial pad); the number of programmable keys have been specified in the descriptions and throughout the
document.
The DP5008 with one programmable key and DP5018-S with ten programmable keys are the two non-
display models offered for locations where a lower cost telephone is appropriate.
DP5008
© Copyright 2007
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
9740 Irvine Blvd., Irvine, CA 92618-1697 (949) 583-3700
www.telecom.toshiba.com
Strata
Product Bulletin
DP5018-S
CIX
®
™
PBCIX-0063
Nov. 5, 2007
Advertisement
Table of Contents
Related Manuals for Toshiba DP5008
Summary of Contents for Toshiba DP5008
- Page 1 The DP5008 with one programmable key and DP5018-S with ten programmable keys are the two non- display models offered for locations where a lower cost telephone is appropriate.
- Page 2 (ADM) with 10 programmable LCD keys is a natural choice for additional programmable keys on any of the DP series telephones (except the DP5008). The KM and DDM modules, with 20 and 60 programmable keys respectively, are excellent choices for adding additional programmable buttons to a telephone or outfitting a receptionist console.
- Page 3 The Digital Off-Hook Call Announce option enables stations to receive internal calls over their speaker while on another call using the handset. This requires installation of the DOCA1A module in the base of the telephone (not supported on DP5008 model). Off Hook Call Announce through the handset is a standard feature.
-
Page 4: Value Propositions
The DP5000 product family addresses the industry’s demand for an enhanced look with added functionality to the Toshiba brand of telephones. Toshiba listened to the voice of the customer (both dealers and end-users) to come up with the following enhancements: Modern New Look •... -
Page 5: Features And Capabilities
Optional Speaker OCA for all models except the single line telephone • Two non-display models for budget-constrained installations Features and Capabilities The DP5008 telephone can support on-hook dialing and has a built-in headset interface. All of the other DP5000-series telephones: • Support on-hook dialing •... -
Page 6: Physical Specifications
Without Tilt DP5008 5.9 in. (150 mm) DP5018-S, DP5022-SDM, DP5022-SD, DP5122-SD, 10.16 in. (258 mm) DP5032-SD, DP5132-SD, 6.10 in. (155 mm) DP5130-SDL DDM5060 10.16 in. (258 mm) KM5020, LM5110 3.54 in. (90 mm) 6 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 7: Dp5000-Series Telephone Tilt Angles
When wall mounted there are two angles available. The DP5008 base is fixed at 15 degrees. Refer to the figures below and the installation section for more detail. -
Page 8: Compatibility And Migration
Operation: 0° ~ 40° C (32° ~ 104° F) - (20 ~ 80% non-condensing humidity) Compatibility and Migration The DP5000-series telephones replace the DKT3200-series telephones in the Toshiba product line. All three generations of telephones, DKT2000, DKT3200 and DP5000, can co-exist with full functionality in one Strata CIX system with Release 5.1 software or above. -
Page 9: Order Information
DP5000-series telephones require a CIX Basic Port License: LIC-4 Basic Port The DP5022-SDM telephone will work only on CIX40. For customers migrating DP5022-SDM telephones from CIX40 to CIX100, CIX200, or CIX670 system, a onetime, per-telephone license is required. (Part Number: LIC-1-DP5022SDM) 9 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 10: Connections
High resistance or faulty cable splices The DP5000-series handset connects with a two-pair modular cable included with the telephone. An ADM connects to the DP5000-series station only with the modular cable included with the ADM. 10 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 11: Station Loop Length For Cix100/200/670
2ADM 1000 ft. 500 ft. (151m) (303m) DP5122-SD, DP5032-SD, (LM5110, KM5020) + DOCA1A DP5132-SD, DP5130-SDL 1000 ft. DDM5060 (303m) BWDKU and BDKS do not support two pair wiring, one-pair wiring must be used. 11 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 12: Station Loop Length For Cix40 Only
DP5000-Series Telephone and ADM Power Factors The table below shows the -24 VDC power factor for the devices listed. Telephone Model Number Power Factor DP5008 DP5018-S, DP5022-SDM, DP5022-SD, DP5122-SD, DP5032-SD, DP5132-SD, DP5130-SDL DOCA1A LM5110 KM5020 DDM5060 12 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 13: Installation Guidelines
When the tilt stand extension is used, simply remove the line cord from under the rear cable clip. This will allow the tilt stand extension to deploy without strain on the line cord. 13 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 14: Wall Mounting
Installation Guidelines Wall Mounting All of the DP5000-series telephones, except the DP5008, wall mount in the same manner. Attach two screws to the wall, slide the telephone down over the screw heads to secure. 3.25 in. (82.5 mm) Wall Mount Holes Wall mounting requires two pan head screws spaced vertically 3.25 inches apart and a short line cord. -
Page 15: Add-On Module Installation
ADM or both. ADM cable DP5000-series Telephone ADM cable is routed under the clips ADM connection bracket Remainder of cable length is secured in the connector recess. Figure 3 DP5000-Series ADM Connection 15 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 16: Telephone Administration Reference
3. From the station list on the right hand side of the screen, choose the extension number to change. 4. Click on the Key tab 5. Click on the button to be setup 6. Choose the feature to be applied from the feature list on the right-hand side. 16 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 17: Lm5110 Lcd Keystrip Setup
7. Enter the Extension number to be assigned to the button. 8. Key Strip Label will be the name that appears on the LCD label, enter an easy to remember identifier. 9. Click OK 10. Click Submit. 17 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 18: Volume Control
Programming changes can be done through the telephone or through MyPhoneManager. Following are the instructions using the telephone. Volume Control The following instructions apply to all telephones, except DP5008. To adjust the handset volume Press the Vol to increase volume and Vol to decrease volume during the call. -
Page 19: Backlight Options
FB1 is the lower left key, FB2 in the next up, FB3 is above FB2, and FB4 is above FB3. Note The backlight timing and brightness controls have no effect on non-display and non-backlight models. The Bright/Dim softkeys will appear on non-backlight models but, have no effect. 19 of 20 Toshiba DP5000-Series Digital Telephones... -
Page 20: Mic/Mute Key
3. Press the key you wish to label. 4. Use the dial pad to enter the label. 5. Press the key labeled in step 3 to save the setting. 6. To program another key, repeat steps 2-5. 20 of 20 Toshiba DP5000-Series Digital Telephones...