Configuring Subscriber Information Parameters - Cisco SPA303 Administration Manual
Hide thumbs
Also See for SPA303:
- User manual (53 pages) ,
- Setup and troubleshooting manual (11 pages) ,
- Datasheet (7 pages)
Table of Contents
Advertisement
Configuring SIP, SPCP, and NAT
Configuring SIP
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Proxy Redundancy Method
Click Submit All Changes.
Configuring Subscriber Information Parameters
To configure subscriber information parameters for each extension:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Ext <number> tab.
Enter the subscriber information:
Parameter
Display Name
User ID
Password
Use Auth ID
Description
Select Normal or Based on SRV port. The phone creates
an internal list of proxies returned in the DNS SRV
records.
If you select Normal, the list contains proxies ranked by
weight and priority.
If you select Based on SRV, the phone uses normal, then
inspects the port number based on the first-listed proxy
port.
Defaults to Normal.
Description
Display name for caller ID.
Extension number for this line.
Password for this line.
Defaults to blank.
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the user
ID and password.
Defaults to no.
4
121
Advertisement
Table of Contents
