Table of Contents
Advertisement
Quick Links
DRYER INSTALLATION INSTRUCTIONS
Gas (U.S.A. and Canada) & Electric (Canada Only)
INSTRUCTIONS D'INSTALLATION DE LA SÉCHEUSE
Modèles de 29" et de 27" de largeur
À gaz (É.-U. et Canada) et Électrique (Canada uniquement)
Para obtener acceso al manual de uso y cuidado en español, o para obtener información adicional acerca de su producto, visite:
Tenga listo su número de modelo completo. Puede encontrar el número de modelo y de serie dentro de la cavidad superior de la puerta.
Table of Contents
DRYER SAFETY ................................................................
INSTALLATION REQUIREMENTS ....................................
Tools and Parts .................................................................... 4
Location Requirements ...................................................... 5
ELECTRIC DRYER POWER HOOKUP-CANADA ONLY ........... 7
Electrical Requirements ..................................................... 7
Install Leveling Legs ........................................................... 7
GAS DRYER POWER HOOKUP ................................................. 8
Gas Supply Requirements .................................................. 8
Electrical Requirements ..................................................... 9
VENTING .................................................................................... 10
Venting Requirements ....................................................... 10
Plan Vent System ............................................................... 11
Venting Kits ........................................................................ 11
Install Vent System ............................................................ 12
Make Gas Connection ...................................................... 13
Connect Vent ..................................................................... 13
Level Dryer ......................................................................... 14
Complete Installation Checklist ....................................... 14
Reverse Door Swing (Optional) ........................................ 14
Troubleshooting ................................................................. 20
INSTALLATION NOTES
_________________________________
Date of purchase:
_______________________________
Date of installation:
________________________________________
Installer:
___________________________________
Model number:
___________________________________
Serial number:
W10096984A
W10097000A-SP
29" and 27" Wide Models
www.whirlpool.com
2
4
Table des matières
SÉCURITÉ DE LA SÉCHEUSE .......................................
EXIGENCES D'INSTALLATION ......................................
Outillage et pièces ............................................................ 23
Exigences d'emplacement ............................................... 24
RACCORDEMENT À L'ALIMENTATION ÉLECTRIQUE DE LA
SÉCHEUSE ÉLECTRIQUE - CANADA SEULEMENT ............. 26
Spéci cations électriques ................................................ 26
Installation des pieds de nivellement .............................. 27
RACCORDEMENT D'UNE SÉCHEUSE À GAZ ....................... 27
Spéci cations de l'alimentation en gaz .......................... 27
Spéci cations électriques ................................................ 29
L'ÉVACUATION.......................................................................... 30
Exigences concernant l'évacuation ................................ 30
Plani cation du système d'évacuation ........................... 31
Trousses d'évacuation ...................................................... 31
Installation du circuit d'évacuation ................................. 33
Raccordement au gaz ....................................................... 33
Raccordement du conduit d'évacuation ......................... 34
Réglage de l'aplomb de la sécheuse ............................... 34
Achever l'installation - liste de véri cation ..................... 35
Inversion du sens de l'ouverture de la porte (facultatif) .. 35
Dépannage ......................................................................... 42
NOTES CONCERNANT L'INSTALLATION
_____________________________________
Date d'achat :
________________________________
Date d'installation :
______________________________________
Installateur :
________________________________
Numéro de modèle :
__________________________________
Numéro de série :
21
23
1
Advertisement
Table of Contents
Related Manuals for Whirlpool W10096984A
Summary of Contents for Whirlpool W10096984A
-
Page 1: Table Of Contents
NOTES CONCERNANT L’INSTALLATION _________________________________ _____________________________________ Date of purchase: Date d’achat : _______________________________ ________________________________ Date of installation: Date d’installation : ________________________________________ ______________________________________ Installer: Installateur : ___________________________________ ________________________________ Model number: Numéro de modèle : ___________________________________ __________________________________ Serial number: Numéro de série : W10096984A W10097000A-SP... -
Page 2: Dryer Safety
DRYER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”... - Page 3 WARNING: For your safety, the information in this manual must be followed to minimize the risk of re or explosion, or to prevent property damage, personal injury, or death. – Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 4: Installation Requirements
IMPORTANT SAFETY INSTRUCTIONS When discarding or storing your old clothes dryer, remove the door. SAVE THESE INSTRUCTIONS INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Tools needed for all installations: Adjustable wrench that Caulking gun and compound opens to 1"... -
Page 5: Location Requirements
Parts supplied: If you are using power supply cord, a grounded electrical outlet located within 2 ft. (610 mm) of either side of dryer. See “Electrical Requirements.” A sturdy oor to support dryer and a total weight (dryer and load) of 200 lbs. (90.7 kg). The combined weight of a companion appliance should also be considered. -
Page 6: Dryer Dimensions
Installation clearances: The location must be large enough to allow the dryer door to open fully. Most installations require a minimum 5½" (140 mm) clearance behind the dryer for the exhaust vent with elbow. See “Venting Requirements.” 29" Wide Models 27"... -
Page 7: Electric Dryer Power Hookup-Canada Only
ELECTRIC DRYER POWER GROUNDING INSTRUCTIONS HOOKUP - CANADA ONLY Electrical Requirements WARNING WARNING: Electrical Shock Hazard Plug into a grounded 4 prong outlet. Failure to do so can result in death or electrical shock. SAVE THESE INSTRUCTIONS It is your responsibility: Install Leveling Legs To contact a quali ed electrical installer. -
Page 8: Gas Dryer Power Hookup
Gas type Screw in leveling legs Natural gas: This dryer is equipped for use with Natural Gas. It is design- diamond certi ed by CSA International for LP (propane or butane) gases marking with appropriate conversion. Your dryer must have the correct burner for the type of gas in your home. -
Page 9: Electrical Requirements
Option 1 (Recommended Method) Elevations above 10,000 ft. (3,048 m): Flexible stainless steel gas connector: When installed above 10,000 ft. (3,048 m) a 4% reduction of the burner B.T.U. rating shown on the model/serial If local codes permit, use a new exible stainless steel gas number plate is required for each 1,000 ft. -
Page 10: Venting
VENTING Exhaust hoods: Venting Requirements Must be at least 12" (305 mm) from ground or any object that may obstruct exhaust (such as owers, rocks, bushes, WARNING or snow). 4" (102 mm) Fire Hazard 4" 2½" (102 mm) (64 mm) Use a heavy metal vent. -
Page 11: Plan Vent System
Alternate installations for close clearances Plan Vent System Venting systems come in many varieties. Select the type best for your installation. Two close-clearance installations are shown. Recommended exhaust installations Refer to the manufacturer’s instructions. Typical installations vent the dryer from the rear of the dryer. Other installations are possible. -
Page 12: Install Vent System
Special provisions for mobile home installations: The Vent system chart provides venting requirements that will help achieve best drying performance. The exhaust vent must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate Vent System Chart beneath the mobile home. -
Page 13: Make Gas Connection
Connect vent to exhaust hood Open shut-off valve Closed valve Open valve Open shut-off valve in supply line; valve is open when handle is parallel to gas pipe. Then, test all connections by brushing Vent must t over the exhaust hood. Secure vent to exhaust on an approved noncorrosive leak-detection solution. -
Page 14: Level Dryer
Level Dryer Remove lm on console and any tape remaining on dryer. Wipe dryer drum interior thoroughly with a damp cloth to remove any dust. Level dryer Read “Dryer Use” in your Use and Care Guide. Set the dryer on a full heat cycle (not an air cycle) for 20 minutes and start the dryer. - Page 15 29" Wide Model Large Side-Swing Door Remove and transfer hinge hole plugs Place towel on dryer Use a small, at-blade screwdriver to gently remove 4 hinge all, at-blade driv ntly 4 hi hole plugs on left side of dryer cabinet. Insert plugs into hinge Place towel on top of dryer to avoid damaging the surface.
- Page 16 29" Super Wide Side-Swing Door Remove screws from hinges Place towel on dryer Remove screws attaching hinges to door. Place towel on top of dryer to avoid damaging the surface. Remove screws from door Remove bottom screws Remove screws at top, bottom, and side of door Remove screws at top bottom and side of door (4 screws).
- Page 17 Flip door over Remove door strike Flip door over so handle side is down. Attach door hinges Remove door strike from dryer cabinet and set aside. Remove and transfer hinge hole plugs Use a small, at-blade screwdriver to gently remove 4 hinge hole plugs on left side of dryer cabinet.
- Page 18 Remove door strike plug Remove bottom screws Remove door strike plug. Insert the door strike removed in Open dryer door. Remove bottom screws from dryer cabinet Step 9 into hole and secure with screw. Insert door strike side of hinges. Loosen (do not remove) top screws from dryer cabinet side of hinges.
- Page 19 Remove screws from door Attach door hinges Remove screws at top, bottom, and side of door (5 screws). Keep door screws separate from hinge screws as they are different sizes. Holding door over towel on dryer, grasp sides of outer door and lift to separate it from inner door.
-
Page 20: Troubleshooting
Check door strike alignment Insert screws in hinge holes on dryer cabinet Close door and check that door strike aligns with door catch. If it is needed, slide door catch left or right NOTE: 2 people maybe needed to reinstall door. within slot to adjust alignment.