Summary of Contents for Acer AT1916D
-
Page 1: User Manual
LCD TV RECEIVER User Manual MODEL: Please read this manual carefully before using your television and keep this manual AT1916D in a good place for future reference. -
Page 2: Table Of Contents
TABLE OF CONTENT FOR YOUR SAFETY ..................2 PRECAUTIONS AND REMINDERS ............3 IMPORTANT SAFETY INSTRUCTIONS ........... 4 PACKAGE CONTENTS ................. 5 PREPARATION ....................6 ATTACHING THE BASE ......................6 PREPARING YOUR LCD TV FOR WALL MOUNTING ..........6 PERIPHERAL CONNECTION GUIDE ............8 OPERATING INSTRUCTIONS .............. -
Page 3: For Your Safety
SYMBOL SYMBOL DEFINITION DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of SA 1965 electrical shock to persons. -
Page 4: Precautions And Reminders
PRECAUTIONS AND REMINDERS Place unit on an even Unplug immediately if Do not cover or block surface. foreign materials fall inside any vents and openings. the TV cabinet or if the TV Inadequate ventilation may shorten the life of the unit falls. -
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. -
Page 6: Package Contents
21. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 22. Power Lines – An outdoor antenna should be located away from power lines. 23. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the antenna system is grounded to provide some protection against voltage surges and built up static charges. -
Page 7: Preparation
PREPARATION 2 Secure the wall mount bracket to the back of your TV using four screws, as indicated in the illustration. IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s 100 mm M4 screws warranty does not cover user abuse or... -
Page 8: Remote Control
2. Connect the antenna cable or CATV cable to the aerial socket TV ANTENNA at the back of the TV set. 3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AA 1.5V). 4. Power: Insert the power cord in the AC power wall socket. -
Page 9: Peripheral Connection Guide
PERIPHERAL CONNECTION GUIDE AC POWER ① COMMON INTERFACE (CI) – Conditional Access Module (CAM) use only. Please contact your service provider for details. ②、③、④ AV IN – Connect the primary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source. -
Page 10: Using The Front Panel Controls
USING THE SIDE PANEL CONTROLS VOL + VOL +: Press to increase the sound volume level. VOL - VOL - : Press to decrease the sound volume level. CH ▲ CH ▲: Press to select the next higher Programme number. CH ▼... -
Page 11: Using The Remote Control
USING THE REMOTE CONTROL POWER Power Press to turn ON/OFF (standby) the TV. In digital TV/ analog TV, press DISPLAY key to show channel information banner and detail Display channel information banner in loop In other input source, Press Display show the Input Source Press to display the Electronic Programme Guide... - Page 12 Number key 1 Number key 2 Number key 3 Number key 4 Number key 5 Number key 6 Number key 7 Number key 8 Number key 9 Number key 0 Teletext Press to display or close Teletext. • In TV mode: It works only for turning on the subtitle and change to the next page marked as subtitle subtitle.
-
Page 13: Viewing Mode Illustrations
VIEWING MODE ILLUSTRATIONS Normal Mode The original content would be at the centre of the screen. 16:9 Content 4:3 Content Wide Mode The original content in this mode has to fill the entire screen of the display. 16:9 Content 4:3 Content ZOOM Mode For those wide format images which are originally programmed into 4:3 frames with black bars around, this mode would stretch the image in both width and height for full display with... -
Page 14: Connecting Equipment
Using the Antenna or Cable for your CONNECTING EQUIPMENT Coaxial (RF) Using Your Antenna or Digital Cable for 1. Turn off the TV and VCR. 2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the TV ANTENNA connector 1. -
Page 15: Using Hdmi
Connecting Your TV Set-Top Box For TV Set-Top Boxes with DVI Using HDMI 1. Turn off the TV and TV Set-Top Box. TV Set-Top Boxes that have a HDMI digital 2. Using a HDMI-DVI cable, connect the DVI interface should be connected to the HDMI end to your TV Set-Top Box and the HDMI input of the LCD TV for optimal results. - Page 16 Using Component Video Connecting Your Basic Set-Top Box Connecting your TV Set-Top Box : Using Composite Video 1. Turn off the TV and TV Set-Top Box. 1. Turn off the TV and Set-Top Box. 2. Connect the Pr (red colour) connector on your TV Set-Top Box to the corresponding 2.
- Page 17 Using Coax (RF) Connecting your DVD Player 1. Turn off the TV and Set-Top Box. 1. Turn off the TV and DVD player. 2. Using a Coax (RF) cable, connect one end 2. Connect a HDMI cable to the HDMI output to the TV OUT (RF) on your Set Top Box of your DVD player and the other end to and the other end to the TV input at the...
- Page 18 Using Component Video Using SCART Connecting your DVD Player Connecting your DVD Player : 1. Turn off the TV and DVD player. 1. Turn off the TV and DVD player. 2. Connect the Pr (red colour) connector on 2. Connect the SCART socket of your DVD your DVD player to the corresponding Pr player to the SCART socket of the TV.
- Page 19 Using Composite (AV) Video NOTE Connecting your DVD Player Refer to your VCR or Video Camera user manual for more information about the video output requirements of the product. Connecting to a PC 1. Turn off the TV and DVD player. 2.
-
Page 20: Using The Menus
USING THE MENUS 8. Advanced Control: [Noise Reduction] - To filter out and 1. Press the MENU/BACK button to display reduces the image noise and improve or close the main menu picture quality. Select the effect degrees 2. Use the Navigation Ring to move around from Off, Low, Medium, High, or Auto. -
Page 21: Sound Menu
SOUND MENU TV MENU The Sound menu provides audio adjustment for user to modify the audio setting. 1. Country: To select the relevant country. This is the country you are in, or the 1. Sound Mode: To set the TV to a country whose channels you want to predefined sound setting from User, Music, receive if you live near its borders. - Page 22 [Single RF Scan (Digital Only)] - Note: The following RC number-mapping Enter the Single RF Scan in the Channels table will not be shown on the TV screen. submenu to scan digital channels. Available characters O m n [Decoder (Analog only)] - Channel Decode support the Canal+ (paid television channel);...
-
Page 23: Features Menu
FEATURES MENU will be displayed. [1st Subtitle 2nd Subtitle] - To select The Features menu in TV mode shows your primary subtitle language and your as below. This menu gives users the most secondary subtitle language. flexibilities to satisfy their generally demands. According to the various requirements in [Subtitle Type] - To choose the subtitle different source modes, certain features should... -
Page 24: Common Interface Module
settings apply to digital channels. the Smart Card into the CI slot located at the side of the TV. Note: This function operates according to information from the broadcasting station. 2. Turn on the TV and press MENU and Therefore if the signal has no information, select the TV submenu. -
Page 25: Oad Operation
Operation 1. When you find the channel a message will be displayed. Over Air Download Software ID : XXXXXXXX A New Version of software is detected.Do you want to upgrade Accept Remind me Later Select Next 2. Use to accept or postpone the ▲... -
Page 26: Tips
TIPS Over Air Download Software ID : XXXXXXXX Care of the screen Programming... Do not rub or strike the screen with anything hard as this may scratch or damage Warring : During the process. Please do not unplug the TV Set the screen permanently. -
Page 27: Product Specification
* This model complies with the specifications listed below. * Designs and specifications are subject to change without notice. * These models may not be compatible with features and/or specifications that may be added in the future. Model No. AT1916D DISPLAY Viewable 18.5” Television System... - Page 28 WALL MOUNTING VESA-compatible wall bracket 100 x 100 mm (W x H) Screw type Metric 4x10 mm POWER Power Consumption 50 W Standby < 1 W Mains Power AC 100-240 V~, 50 / 60Hz Audio Power 3 W + 3 W Ambient Temperature 5°C - 35°C PACKAGE CONTENTS Supplied Accessories TV unit x1...
-
Page 29: Before Calling Service
BEFORE CALLING SERVICE Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ”... -
Page 30: Glossary
GLOSSARY TV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs Located on the rear of the receiver, these connectors (RCA phono type plug) are used for the input of audio and video signals. -
Page 31: Appendix
APPENDIX Appendix 1 VGA Timing table Item H.Freq.(KHz) Mode Resolution V.Freq.(KHz) 19" 31.469 IBM VGA 640x350 70.086 31.469 IBM VGA 720x400 70.087 31.469 IBM VGA 640x480 59.94 MACINTOSH 640x480 37.861 VESA 640x480 72.809 37.5 VESA 640x480 ... - Page 32 Appendix 2 HDMI (High Definition Multimedia Interface) support format 1. Support 480i/480p, 576i/576p, 720p, 1080i format with HDCP. 2. Digital interface with 4 channels TMDS signal. Scart input/output description TV Source Screen Display Source SCART1 Out CVBS CVBS HDMI / VGA / Component -- / -- / Component CVBS CVBS...
-
Page 33: Information
INFORMATION Connecting to Power Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a 16A plug (or 10 A plug). If this plug is unsuitable or needs to be replaced, please note the following : Plug Replacement If you need to replace the fitted plug.