Page 1
CD TUNER DECK XC-IS22CD STEREO POWER AMPLIFIER M-IS22 SPEAKER SYSTEM S-IS22 Operating Instructions...
Page 2
VENTILATION: When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 30 cm at top, 15 cm at Operating Environment rear, and 15 cm at each side). H045 En WARNING: Operating environment temperature and humidity: Slot and openings in the cabinet are °...
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
Using this manual may become unreliable if strong This manual is for the XC-IS22CD Stereo CD Tuner Deck. It is sunlight or fluorescent light is shining on the unit’s remote split into three sections: setting up (chapters 1 and 2); using the sensor.
Before you start Avoiding condensation problems Condensation may form inside the unit if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the unit, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.
Connecting up The rear panel Important Before making or changing any rear panel connections, make The illustration on this page shows the XC-IS22CD. sure that all the components are switched off and unplugged from the power supply. Main unit Speaker caution!
Connecting up Connecting the radio Connecting the speakers Use the supplied red and black speaker cords to connect the antennas speakers to the main unit. To get the best sound from the Connecting the supplied antennas will allow you to listen to system, it’s important that you connect the two strands of both AM and FM radio broadcasts.
A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.
XC-IS21MD/XC-IS21T are different from the XC- this system using the system cable and two sets of RCA pin-plug IS22CD, the controls of the XC-IS22CD function in the same stereo cables supplied with the CT-IS21. way as those on the XC-IS21MD/XC-IS21T.
Controls and displays Front Panel This illustration is European model. OPEN/ CLOSE STEREO CD TUNER DECK XC-IS22CD T APE ENHANCE BALANCE POWER AMPLIFIER M-IS22 AERO DUCT CONSTRUCTION BASS TREBLE TUNER LINE1.2 STANDBY/ON STANDBY 25 ST.MEMORY•STOP 7 (p. 13, 15, 17, 18, 20) 1 OPEN/CLOSE touch sensor (p.
Controls and displays Display TUNED STEREO RDS B.CUT ASES MONO 10 2 NR Lights when Dolby B Noise Reduction is on 1 B.CUT Lights when beat cut 2 is active (p. 21) 1 1 ” Indicates the reverse mode (“, [ or ”) 2 STEREO Lights when listening to FM stereo radio 12 TAPE 23 Indicates the direction of tape travel (2 (reverse) 3 TUNED Lights when tuned to a radio broadcast...
Getting started OPEN/ CLOSE POWER AMPLIFIER M-IS22 STEREO CD TUNER DECK XC-IS22CD AERO DUCT CONSTRUCTION T APE ENHANCE FOLDER/TRACK STANDBY/ON BASS TREBLE STANDBY TUNER LINE1.2 Switching on and setting the Changing the clock format You can choose to display the clock in either 12 or 24 hour clock formats.
Getting started OPEN/CLOSE OPEN/ CLOSE STEREO CD TUNER DECK XC-IS22CD STANDBY DIMER MUTE DISP TUNER LINE1.2 OPEN/CLOSE CLEAR >10 10/0 SLEEP PROGRAM RANDOM REPEAT T APE ENHANCE FOLDER/TRACK SONUD MODE MONO Label surface BASS TREBLE TUNER LINE1.2 CD spindle Playing CDs...
Getting started OPEN/ CLOSE STEREO CD TUNER DECK XC-IS22CD STANDBY DIMER MUTE DISP TUNER LINE1.2 OPEN/CLOSE CLEAR >10 10/0 SLEEP PROGRAM RANDOM REPEAT T APE ENHANCE FOLDER/TRACK SONUD MODE MONO BASS TREBLE TUNER LINE1.2 Tuning in stations Improving poor FM reception If you’re listening to an FM station in stereo but the reception is...
Getting started OPEN/ CLOSE STEREO CD TUNER DECK XC-IS22CD STANDBY DIMER MUTE DISP TUNER LINE1.2 OPEN/CLOSE CLEAR >10 10/0 TAPE SLEEP PROGRAM RANDOM REPEAT OPEN/CLOSE0 T APE ENHANCE FOLDER/TRACK SONUD MODE MONO BASS TREBLE TUNER LINE1.2 Playing cassette tapes To skip back or forward a track on the tape, press –...
Getting started Changing displays CD displays It is possible to switch the display information while using tape, • When using the CD function, press DISP(/RDS) to CD, or tuner functions. cycle through display information. During CD playback: When CD is stopped: Tuner displays •...
More CD features Programming the CD track Playing tracks at random order Selecting random play leaves the track order of the disc up to the player. Each track on the disc is played just once, but in a Programming the track order means telling the player precisely random order.
More tuner features Saving stations for quick Using RDS (UK model only) recall Radio Data System, or RDS as it’s usually known, is a system used by FM radio stations to provide listeners with various You can save up to 30 station presets so that you always have information—the name of the station and what kind of show easy access to your favorite stations without having to tune in they’re broadcasting, for example.
More tuner features LEISURE Leisure interests and hobbies Note • The RDS indicator will light in the RDS mode. JAZZ Jazz music COUNTRY Country music • If no RDS signal can be received, the message NO DATA NATION M Popular music in a language other than will be displayed.
Making tape recordings Making tape recordings Select the function you plan to record. For example, press to record from the radio. If you’ve TUNER You can make tape recordings from the radio, CDs, or from an selected a CD, make sure that it’s stopped. You cannot record external component connected to the auxiliary inputs.
Making tape recordings Improving AM tape recordings Recording AM broadcasts on cassette tape can result in noisy recordings. If you experience this, change the beat cut mode. Switch the system into standby. Press REC/STOP for about 3 seconds. Release when the display reads if you have previously switched the beat cut mode).
Adjusting the sound Using the timer Adjusting the bass, treble Setting the wake-up timer and balance Use the wake-up timer to set the system to switch on at any time and start playing your choice of source. To help you get the sound you want you can increase or reduce Note the bass and treble, or change the left/right balance.
Using the timer Setting the sleep timer Set the record end time. Use the dial to set the hour, then press . Set the minute The sleep timer switches off the system after a specified time so in the same way, pressing when you’re done.
This system is designed for use with conventional, fully Taking care of your discs circular CDs only. Use of shaped discs is not recommended. PIONEER disclaims all liability arising in connection with the When holding discs, take care not to leave fingerprints, dirt or use of shaped discs.
• Make sure that the head cleaning cassette you buy is (about the first 3 or 4 seconds of each side). compatible with auto-reverse decks. Check with a Pioneer authorized service center for details. • Do not use dry-type head cleaning cassettes.
Additional information Troubleshooting Problem Remedy General No sound • Check that speakers and other system components are properly connected. • Check that the input selector is set correctly. Can’t switch between functions • If the cassette deck is currently recording, you can’t change the function. Timer doesn’t work •...