Page 1
PerSOnaL Care Hair Trimmer SHBS 1000 A1 Hair Trimmer Operation and Safety Notes...
Page 2
Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device. GB / IE Operation and Safety Notes Page...
Table of Contents Introduction Proper use ................Page 7 Included items ................. Page 8 Description of parts ..............Page 8 Technical data ................. Page 9 Safety ..................Page 9 General safety advice ............Page 10 Before first use Charging the batteries ............Page 13 Prolonging the life of the rechargeable batteries ....
Page 6
The following icons / symbols are used in this instruction manual: Read instruction manual! Damaged appliances, power cables and power plugs mean potentially fatal risks from electric shock. Regularly check the condition of the appliance, the power cables and the power plugs. Observe caution and safety notes! Caution –...
Introduction Hair Trimmer Introduction Q Dear Customer, We are pleased you chose to purchase this product and hope you enjoy using your new hair and beard clippers. These hair and beard clippers and their easily fitted cutting length comb attachments can be used to cut different hair lengths and shape perfect hair contours.
Output: 4.5 V , 1,000 mA Protection class: Ambient conditions: For indoor use only Hair and beard clippers: Model: SHBS 1000 A1 Article No.: 9133711 Rechargeable batteries: 2 x NiMH, HR6 (AA) 1,000 mAh Input: 4.5 V , 1,000 mA...
Safety General safety advice J T his device is not intended to be used by persons (including children) with restricted physical, sensory or mental abilities or with insufficient experience and / or knowledge, unless they are supervised by a person who is responsible for their safety or they have received instruction on how to use the device from such a responsible person.
Page 11
Safety The device will operate at its best if you observe the following: J T o ensure optimum performance, operate the device only in accordance with the information on the rating plate. J D o not expose the hair clippers to temperatures below +10 °C or above +40 °C.
Page 12
Safety c CAUTION! DANGER OF ELECTRIC SHOCK! If the device falls into the water, the first thing you must do is pull the mains adapter out of the mains socket before you put your hands into the water. c CAUTION! DANGER OF ELECTRIC SHOCK! Never touch the mains adapter with wet hands particularly when you insert or pull out the adapter from the mains socket.
Safety / Before first use J P ull the mains adapter out of the mains socket - if a fault occurs, - before you clean the device, - if you intend leave the device unused for a long period, - after every use. When doing this, pull directly on the mains adapter and not on the lead.
Page 14
Before first use The device is fitted with 2 NiMH rechargeable batteries and an overcharge protection system so that the batteries can be topped up without being overcharged. j C onnect the cable of the plug-in mains adapter to the charging station of the hair and beard clippers.
Before first use / Use j I nsert the connector plug of the plug-in mains adapter into the socket on the underside of the hair and beard clippers. j T o avoid injury and damage to the device, always switch off the device before you connect it to the mains supply.
Cutting hair Q Tip: Start with a cutting length comb attachment with a longer cutting length than is finally required, then proceed in stages until you achieve the desired length. Cutting length comb attachments j S elect the cutting length comb attachment (4 - 6 mm / 7 - 9 mm / 10 - 12 mm / 16 - 18 mm / 22 - 24 mm / 28 - 30 mm) to suit the desired cutting length.
Cutting length comb Cutting lengths* attachment 6 (mm) with cutting length fine adjustment (mm) 22 - 24 22.0 22.7 23.4 24.0 28 - 30 28.0 28.7 29.4 30.0 * Please note that the actual cutting lengths may deviate from the cutting lengths given here, depending on the cutting angle.
Use / Cleaning and care Thinning hair Q This attachment allows you to reduce the volume of hair by only picking up and cutting part of the hair. j P ush the thinning attachment on to the blade set from the front to thin out the hair.
Cleaning and care j N ever touch the mains adapter with wet hands when you insert or pull out the adapter from the mains socket. j A lways keep the mains adapter and connection lead dry. WARNING! Do not immerse the hair and beard clippers in water or other liquids for cleaning as the device is not waterproof.
Cleaning and care / Disposal j A fter cleaning, place the locating lug of the blade set back into the locating hole of the cutter head mount (see Fig. C). j R e-engage the blade set by applying a little light pressure from the rear of the device (see Fig.
Disposal / Warranty and service When you decide to discard the device, please do not place it (even without batteries) into the household refuse bin. Contact your local council to find out about environmentally friendly and proper disposal of the device as electrical scrap. The packaging is composed of natural materials and can be recycled.
Warranty and service / Conformity We are furthermore unable to assume liability for the consequences of improper use of the device. Conformity Q The CE marking has been applied to the product in compliance with the following European directives: EU Low Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (EMC) Directive (2004 / 108 / EC) The Declaration of Conformity is held by the distributor:...