Signaling System - Yamaha YZF-R6T Supplementary Service Manual
Hide thumbs
Also See for YZF-R6T:
- Owner's manual (111 pages) ,
- Supplementary service manual (64 pages)
Table of Contents
Advertisement
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
Left turn signal light
Positive tester probe ! chocolate
Negative tester probe ! ground
Right turn signal light
Positive tester probe ! dark green
Negative tester probe ! ground
A
C
S Turn the main switch to "ON".
S Set the turn signal switch to "
S Measure the voltage (DC 12 V) of the choco-
late
or dark green
1
connector (wire harness side).
S Is the voltage within specification?
YES
This circuit is OK.
EAS00801
4. The neutral indicator light fails to come on.
1. Neutral indicator light (LEDs)
S Check the neutral indicator light for continu-
ity.
Refer to "CHECKING THE LEDs"
S Are the neutral indicator light OK?
email: info@motomatrix.co.uk
1
2
B
" or "
".
at the turn signal light
2
NO
The
wiring
circuit
from the turn signal
switch to the turn sig-
nal light connector is
faulty and must be
repaired.
SIGNALING SYSTEM
YES
2. Neutral switch
S Check the neutral switch for continuity.
Refer to "CHECKING THE SWITCHES".
S Is the neutral switch OK?
YES
3. Voltage
S Connect the pocket tester (DC 20 V) to the
meter assembly coupler (wire harness side)
as shown.
Positive tester probe ! brown
Negative tester probe ! ground
S Turn the main switch to "ON".
S Measure the voltage (DC 12 V) of brown at
the meter assembly coupler (wire harness
side).
S Is the voltage within specification?
YES
This circuit is OK.
8-38
ELEC
NO
Replace the meter
assembly.
NO
Replace the neutral
switch.
1
NO
The
wiring
circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be re-
paired.
Advertisement
Chapters
Table of Contents
Troubleshooting
