Dear Customer, see item 17 on page 4. The Toshiba 20HLV15, LCD TV/DVD Combination complies with Part 15 of the FCC rules. Operation is subject to the Thank you very much for purchasing this Toshiba television. following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference You must carefully read and understand all of the safety received, including interference that may cause undesired operation.
LCD Display technology and are not an indication of the following carefully. titles are sub-divided into chapters. Video CDs and Audio malfunction. Therefore, Toshiba is not responsible for CDs are divided into tracks. perceived defects resulting from these symptoms. Moisture condensation occurs, for example, when you...
DVD and CD software and/or the manufacture of Selecting the video input source ......31 Temporary disabling of parental level by DVD disc ..58 DVD and CD discs, Toshiba cannot guarantee that the DVD Labeling the video input sources ......31 Appendix .............. 59 player contained in this LCD TV will play every feature of Setting the clock ............
® (component video) inputs. Connecting your TV/DVD to a DTV receiver with component video can greatly • one set of standard audio cables component video compatible DVD player, such as a Toshiba DVD Note: player with ColorStream ® , can greatly enhance picture quality and enhance picture quality and realism.
Connecting a camcorder Connecting an HDMI™ or a DVI device to the HDMI input The HDMI input on your TV/DVD receives digital audio You will need: This connection allows you to watch videos recorded on a camcorder. [1] HDMI = High-Definition Multimedia Interface. and uncompressed digital video from an HDMI device or •...
Setting up your TV/DVD Connecting a PC (Personal Computer) Before you connect this TV/DVD to your PC, change the adjustment of You will need: Using the remote control your PC’s Resolution and Refresh rate. See “Monitor Display modes” • one VGA cable at right.
Using the TV/DVD’s features Adding channels to the TV/DVD’s memory When you press CH M M M M M / ? ? ? ? ? , your TV/DVD will stop only on the channels Adjusting the channel settings you have stored in the TV/DVD’s channel memory. Follow the steps Switching between two channels below to program channels into the channel memory.
Locking channels To unlock the video inputs: 1. Press MENU, then press to display the LOCKS menu. With the CH LOCK feature, you can lock specific channels. You will not 2. Press ▲ or ▼ to display the password entering mode. be able to tune locked channels unless you clear the setting.
Setting the ON timer Viewing the wide-screen picture formats (480i and 480p signals only) This feature allows you to program the TV/DVD to turn on automatically at a set time. If you program the ON TIMER to “DAILY,” the TV/DVD will You can view 480i and 480p format programs in a variety of picture sizes—Natural, TheaterWide, and Full.
Using the CableClear ® feature Adjusting the picture CableClear ® reduces visible interference in your TV/DVD picture. This is useful when receiving a broadcast with a weak signal (especially a Selecting the picture mode Cable channel) or playing a video cassette or disc damaged by repeated use.
WOW SRS 3D: To turn on or off the surround 1. Press MENU, then press until the SETUP menu appears. end of its life. Contact your nearest Toshiba will require a different value for this setting. effect in PC mode. 2. Press to highlight BACK LIGHTING.
Playing in fast reverse or fast forward directions Zooming Pause Play This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. Press REV or FF during playback. REV: Fast reverse playback Skip 4 ¢...
Program playback Changing angles You can arrange the playback order of tracks or files on the disc. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the 1. Press PLAY MODE in the stop mode. scene from.
Please be advised that you must obtain permission from the applicable copyright owners to download copyrighted content, : Indicates MP3 file including music files, in any format, including the MP3 and WMA formats, prior to the downloading thereof. Toshiba has no : Indicates WMA file right to grant and does not grant permission top download any copyrighted content.
To change the parental level Setting details Setting details 1) Press to select “Password”. 2) Press Number buttons (0–9) to enter the password Language Picture Sound Parental Other Picture Language Picture Sound Parental Other Language Sound Language Picture Sound Parental Other you have stored.
WARNING: Always use the Toshiba wall bracket specified below TACP Consumer Solutions Center. or another wall bracket approved by Toshiba for wall mounting THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND (3) The warranties from TACP are effective only if the LCD TV/ this television.
Page 18
CAUTION THIS LCD COLOR TELEVISION EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CARE- FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
IMPORTANT SERVICE SAFETY INFORMATION Safety precautions to be followed during servicing: Parts marked with an are critical parts for safety. Replace only with the one described in the parts list. Before returning the DVD product to the customer, make the appropriate leakage current check or resistance measurements to ensure that exposed parts are properly insulated from the supply circuit.
IMPORTANT SAFEGUARDS READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
Page 21
IMPORTANT SAFEGUARDS (CONTINUED) OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Page 22
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING NEC-NATIONAL ELECTRICAL CODE ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A A1-5...
WHEN REPLACING DVD DECK [ When removing the DVD Deck ] Before removing Pick Up PCB and DVD PCB connector, the short circuit the position shown in Fig. 1 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged. [ When installing the DVD Deck ] Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD PCB connector.
DISC REMOVAL METHOD AT NO POWER SUPPLY Remove the Back Cabinet. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) Slide the Rack Loading toward the arrow direction by hand to release the lock. (Refer to Fig. 1) Take out the Disc from the DVD Deck. Be careful not to scratch on the Disc. DVD Deck Rack Loading Fig.
TRAY LOCK The disk cannot be taken out by setting the Tray Lock, please follow the steps below. Turn Unit ON. Set the DVD to the Stop Mode. Press and hold the ‘STOP’ key on the front panel. Simultaneously press and hold the ‘9’ key on the remote control unit. Hold both keys for more than 2 seconds.
ABOUT LEAD FREE SOLDER (PbF) Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PbF printing on the PCB. (Please refer to figures.) Caution: • Pb free solder has a higher melting point than standard solder; Typically the melting point is 50°F~70°F(30°C~40°C) higher.
Page 27
TABLE OF CONTENTS • OWNER'S MANUAL CAUTION ........................A1-1 IMPORTANT SERVICE SAFETY INFORMATION ............. A1-2 A1-3~A1-5 IMPORTANT SAFEGUARDS ..................WHEN REPLACING DVD DECK ................A1-6 DISC REMOVAL METHOD AT NO POWER SUPPLY ..........A1-7 PARENTAL CONTROL - RATING LEVEL ..............A1-7 A1-8 TRAY LOCK ........................
GENERAL SPECIFICATIONS LCD Size / Visual Size 20.04 inch / 508.9mmV System LCD Type Color TFT LCD Number of Pixels 1366(H) x 768(V) View Range Left/Right 89/89 degree Up/Down 89/89 degree Color System NTSC Speaker 2 Speaker Position Front Size 1.8 x 3.9 inch Impedance 16 ohm...
Page 29
GENERAL SPECIFICATIONS On Screen Menu (TV) Display Menu Type Icon Picture Mode(Picture preference) Brightness Contrast Color Tint Sharpness Cable Clear Color Temperature Reset Audio Bass Treble Balance Stable Sound Speakers On/Off Dolby Virtual WOW SRS 3D WOW Focus WOW Tru Bass HDMI Reset Setup...
Page 30
GENERAL SPECIFICATIONS Control Level Volume Brightness Contrast Color Tint Sharpness Bass Treble Balance Picture Scroll Back Lighting H Position V Position Phase Clock Green Blue Stereo, SAP, Mono CH / AV(Line) / DVD / PC Color Stream HD (Component) HDMI Channel (TV/Cable) CH Label Video Label...
Page 31
GENERAL SPECIFICATIONS G-10 On Screen Menu (DVD) Display Menu Type Character Language Menu Subtitle Audio Picture TV Screen Size(4:3, 16:9) OSD Display On/Off JPEG Interval Select Files Sound DRC (Dynamic Range Control) dts Decode Output(5.1ch/ 2ch) Surround On/Off Center On/Off Sub Woofer On/Off Parental Password Lock/ Un Lock...
Page 32
GENERAL SPECIFICATIONS G-13 Remote Unit RC-LT Control Glow in Dark Remocon Remocon Format TOSHIBA Format TOSHIBA Custom Code 40-BF h ,44-BB h ,45-BA h ,45-BC h Power Source Voltage(D.C) UM size x pcs UM-4 x 2 pcs Total Keys 49 Keys...
Page 33
GENERAL SPECIFICATIONS G-14 Features Auto Shut Off (TV) Auto Search Comb Filter Game Position Power On Memory Variable Audio Out Mode (Picture Preference) Color Temparature Control Cable Clear Stable Sound Virtual Dolby SRS WOW(SRS 3D/Focus/Tru Bass) CABLE CH Program (Auto CH Memory) Closed Caption Picture Size Picture Scroll...
Page 34
GENERAL SPECIFICATIONS G-15 Accessories Owner's Manual Language English / French w/Guarantee Card Remote Control Unit Rod Antenna Poles Terminal Loop Antenna Terminal U/V Mixer DC Car Cord (Center+) Guarantee Card Warning Sheet Circuit Diagram Antenna Change Plug Service Facility List Important Safeguard Dew/AHC Caution Sheet Quick Set-up Sheet...
Page 35
Material Cabinet Front PS 94V0 DECABROM Rear PS 94V0 DECABROM Non-Halogen Demand Eyelet Demand G-21 Environment Green PROCUREMENT of TOSHIBA Not accomplished Pb-Free Phase 3 (Phase 3A) G-22 AC Power Adapter Provided Accessories Power Requirement 120V 60Hz Power Consumption at AC...
Page 36
DISASSEMBLY INSTRUCTIONS 1. REMOVAL OF MECHANICAL PARTS 1-3: BACK CABINET (Refer to Fig. 1-3) Remove the 11 screws 1. AND P.C. BOARDS Remove the screw 2. 1-1: HANDLE/BACK COVER ASS'Y (Refer to Fig. 1-1) Remove the Back Cabinet in the direction of arrow. Remove the 4 screws 1.
Page 37
DISASSEMBLY INSTRUCTIONS 1-5: DVD DECK (Refer to Fig. 1-5) Make the short circuit on the position as shown Fig. 1-5 Shield FFC using a soldering. If you remove the DVD Deck with no soldering, the Laser may be damaged. Disconnect the following connectors: Shield DVD (CP2301, CP2302 and CP2601).
Page 38
DISASSEMBLY INSTRUCTIONS Shield LCD Remocon PCB Side Jack Plate CP2200 CP801 CP802 CP3201 Scaler PCB Fig. 1-10 1-11: LCD COVER/LCD PANEL/OPERATION 1/2 PCB (Refer to Fig. 1-11) Remove the 3 screws 1. Remove the 2 screws 2. Remove the 2 screws 3. Fig.
DISASSEMBLY INSTRUCTIONS 2. REMOVAL OF DVD DECK PARTS 2-2: TRAVERSE UNIT ROD/TRAVERSE UNIT HOLDER/ CD DECK/INSULATOR (Refer to Fig. 2-2) 2-1: LOADING MOTOR ASS'Y/START SW PCB ASS'Y/ Remove the screw 1. END SW PCB ASS'Y (Refer to Fig. 2-1-A) Remove the Traverse Unit Rod. Remove the 3 screws 1.
Page 40
DISASSEMBLY INSTRUCTIONS 2-4: DISC L LEVER/DISC STOPPER/LOCKER STOPPER/ 2-6: LINK R ASS'Y/LINK L/LINK MID/LINK SPRING ROLLER GEAR (Refer to Fig. 2-4-A) (Refer to Fig. 2-6) Remove the screw 1. Remove the screw 1. Remove the Disc L Lever and Disc L Lever Spring. Remove the Link Spring.
Page 41
DISASSEMBLY INSTRUCTIONS 2-8: CLAMPER ASS'Y/DISC GUIDE ARM/DISC R LEVER (Refer to Fig. 2-8-A) Unlock the support 1 and remove the Clamper Ass'y. Unlock the support 2 and remove the Disc Guide Arm. Unlock the support 3 and remove the Disc R Lever. Clamper Ass'y Disc R Lever Disc Guide Arm...
Page 42
DISASSEMBLY INSTRUCTIONS 3. REMOVAL AND INSTALLATION OF FLAT 3. When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using PACKAGE IC a tweezers and remove the IC by moving with the IC REMOVAL desoldering machine.
Page 43
DISASSEMBLY INSTRUCTIONS INSTALLATION 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thin- 1. Take care of the polarity of new IC and then install the tip Soldering Iron. (Refer to Fig. 3-8.) new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily.
SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than a the standard time in the appropriate condition.
SERVICING FIXTURES AND TOOLS Ref. No. Remarks Part No. Parts Name JG176 Up-Date Disc JG176 APJG176076 Up-Date Disc Up-Date of the Firmware RE-WRITE FOR DVD FIRMWARE Turn on the power, and set the DVD mode. Confirm that the “No Disc” will be appeared on the screen. Press both VOL.
CONFIRMATION OF CHECK SUM Initial total of MEMORY IC can be checked on the screen. Total hours are displayed in 16 system of notation. NOTE: If you set a factory initialization, the total hours is reset to "0". Turn on the POWER, and set to the TV mode. Set the VOLUME to minimum.
Page 47
WHEN REPLACING EEPROM (MEMORY) IC INIT Table 1-1...
Page 48
WHEN REPLACING EEPROM (MEMORY) IC INIT Table 1-2...
Page 49
ELECTRICAL ADJUSTMENTS 1. ADJUSTMENT PROCEDURE FUNCTION FUNCTION Read and perform these adjustments when repairing the H POSI OSD BAK LIGHT CENT V POSI OSD BAK LIGHT MAX circuits or replacing electrical parts or PCB assemblies. R DRIVE(N) BAK LIGHT MIN CAUTION R CUT OFF(N) BRIGHT CENT...
Page 50
ELECTRICAL ADJUSTMENTS 2-2: WHITE BALANCE Place the set in Aging Test for more than 15 minutes. Receive the gray scale pattern from the Pattern Generator. Using the remote control, set the brightness and contrast to normal position. Activate the adjustment mode display of Fig. 1-1 and press the channel button (03) on the remote control to select "R DRIVE(N)".
Page 51
ELECTRICAL ADJUSTMENTS 2-3: Confirmation of Fixed Value (Step No.) Please check if the fixed values of each the adjustment items are set correctly referring below. HD-MI GAME 480i 480p 720p 1080i 480i 480p 720p 1080i VGA70 SVGA WXGA WXGA44.7 FUNCTION 01 H POSI OSD 02 V POSI OSD 03 R DRIVE (N)
TROUBLESHOOTING GUIDE (LCD SECTION) POWER DOES NOT TURN ON CHANGE F3801. IS F3801 BROKEN ? IS THERE VOLTAGE CHECK IC3803, AND AT 5V OF 2 PIN OF IC3803 LINE. AT13.1V AND 4 PIN AT5V ? IS CD2200 CONNECT CD2200 CONNECTED ? IS THERE VOLTAGE CHECK Q3804, IC3804, IC3805, AT PINS 1~6, 10 AND...
Page 54
TROUBLESHOOTING GUIDE THE PICTURE APPEARS, BUT THE AUDIO DOES NOT APPEAR. (AT RF MODE) IS CD301 CONNECTED ? CONNECT CD301. IS THERE SIGNAL ON CHAGE SP301 AND SP302. PINS 1 AND 4 OF CP301 ? IS THERE SIGNAL ON CHECK IC301, IC302 AND PIN 11 OF IC301 AND PERIPHERAL CIRCUIT.
Page 55
TROUBLESHOOTING GUIDE THE PICTURE DOES NOT APPEAR (1). CHECK THE CONNECTED OF CP3801 AND THE DOSE BACK LIGHT SHINE ? VOLTAGE OF PINS 1~5. CONNECT CD7201. IS CD7203 CONNECTED ? IS THERE SIGNAL AT PINS 13, 14, 16, 17 19, CHANGE V2301.
Page 56
TROUBLESHOOTING GUIDE THE PICTURE DOES NOT APPEAR (2). IS THERE SIGNAL AT CHANGE IC5001. PIN 7 OF IC5001 ? IS CP5001 CONNECTED CONNECT CP5001. AND IS THERE SIGNAL AT PINS 1, 3 AND 5 ? IS THERE SIGNAL CHANGE IC801 AND AT C832, C859 PERIPHERAL CIRCUIT.
Page 57
TROUBLESHOOTING GUIDE THE COLOR DOES NOT APPEAR. IS SETTING OF CHANGE THE SETTING OF COLOR NORMAL ? COLOR. IS THE COLOR RECEIVE THE COLOR SIGNAL. SIGNAL RECEIVED ? IS THERE SIGNAL CHECK IC8101 AND AT PINS 3, 5 AND 6 PERIPHERAL CIRUCUIT.
Page 58
TROUBLESHOOTING GUIDE ON SCREEN DISPLAY DOES NOT APPEAR. IS THERE SIGNAL AT CHECK IC101 AND PINS 2, 3, 4 AND 5 OF PERIPHERAL CIRCUIT. IC101 ? IS THERE SIGNAL AT CHECK NR801AND PINS 57, 58, 59 AND 60 PERIPHERAL CIRCUIT. OF IC801 ? CHECK IC801 AND PERIPHERAL CIRCUIT.
Page 59
TROUBLESHOOTING GUIDE (DVD SECTION) DOES NOT DISPLAY DVD PICTURE DOES THIS DISPLAY REFER TO "NO PLAY DISC". LOGO PICTURE ? DOES THIS HAVE SIGNAL CHECK PINS 8, 6 AND 4 OF AT PINS 158, 161 AND CD701 AND PERIPHERAL 162 OF IC4001 ? CIRCUIT.
Page 60
TROUBLESHOOTING GUIDE DISC DOES NOT EJECT. CHECK PINS 19, 29 AND 30 OF IS REMOTE KEY SET DOES OSD APPEAR IC101 AND PERIPHERAL EFFECTIVELY ? ON THE SCREEN ? CIRCUIT. CHECK PINS 155 AND 156 OF IC4001 AND PERIPHERAL CIRCUIT. DOES THIS HAVE DOES THIS EJECT CHECK IC2301 AND...
Page 61
TROUBLESHOOTING GUIDE DOSE NOT PLAY DVD. CHANGE DVD DECK. DOES CD2601 IS THEVOLTAGE DOES THIS DISPLAY CONNECT WITH CP2601 BETWEEN TP39 AND "INCORRECT DISC". CORRECTLY ? TP43 LESS THAN 0.6V ? CONNECT CD2601. DOES THIS DISPLAY CHANGE IC4001. READING MARK ? CHANGE DVD DECK.
Page 62
TROUBLESHOOTING GUIDE DOES NOT PLAY CD. CHANGE DVD DECK. DOES CD2601 IS THE VOLTAGE DOES THIS DISPLAY CONNECT WITH CP2601 BETWEEN TP39 AND "INCORRECT DISC". CORRECTLY ? TP41 LESS THAN 0.6V ? CONNECT CD2601. DOES THIS DISPLAY CHANGE IC4001. READING MARK ? CHANGE DVD DECK.
Page 63
TROUBLESHOOTING GUIDE NO SOUND DVD/CD ANALOG AUDIO. DOES THIS HAVE SIGNAL AT PINS 1 AND REFER TO "LCD SECTION". 2 OF CD701 ? CHECK PINS 7 AND 8 OF DOES THIS HAVE IC8502 AND PERIPHERAL SIGNAL AT PINS 7 AND CIRCUIT.
Page 68
DVD DECK EXPLODED VIEW (TOP VIEW) NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section. GREASE Check if the correct grease is applied for each position. J2-1...
Page 69
DVD DECK EXPLODED VIEW (BOTTOM VIEW) PCB580 (START SW PCB ASS'Y) PCB590 M2301 (END SW PCB ASS'Y) NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section. GREASE Check if the correct grease is applied for each position.