Related Manuals for Toro DDCWP Series
Summary of Contents for Toro DDCWP Series
- Page 1 DDCWP™ Series Waterproof Battery Controller INSTALLATION AND OPERATING INSTRUCTIONS...
-
Page 2: Table Of Contents
Thank you for choosing the Toro DDCWP Waterproof Battery Controller. The DDCWP incorporates the latest programming technology in an easy-to-use, "digital dial" display. The following instructions will help you get started. As you follow the simple steps, please pay attention to the important NOTES, which will give you helpful hints and programming advice to maximize the feature capability of the DDCWP. -
Page 3: Controller Specifications
The DDCWP is a DC controller. This means it ONLY runs DC latching solenoids. It will not run AC solenoids. It has been fully tested using Toro DC Latching Solenoids. If you intend to use other brands, test them before making an installation. -
Page 4: Installation Instructions
Installation Instructions: DDCWP Controller (continued) RESET button DIGITAL DIAL Advancement button WATERPROOF CAP Attach 2 9VDC alkaline batteries black orange DO NOT CUT IF NOT master station yellow rain common wire CONNECTING TO A valve wires sensor wire. RAIN SENSOR wire MASTER VALVE... -
Page 5: Sensor Connection And Operation
Sensor Connection and Operation: The DDCWP will respond to a Toro, TRS wired Rain Sensor™. Cut the yellow looped wire from the controller, and using waterproof connectors, connect the two wires from the rain sensor to either ends of the yellow controller wires. -
Page 6: Programming
PROGRAMMING: It is recommended to press the RESET button to clear the memory. Press DIAL to advance to SET TIME/DAY Dial Position: SET TIME/DAY Set the current YEAR, MONTH, DAY & TIME. Set the YEAR with +/ON or -/OFF Press NEXT Set the MONTH with +/ON or -/OFF Press NEXT Set the DAY with +/ON or -/OFF... -
Page 7: Water Days
Dial position: WATER DAYS Calendar Intervalr Even interval Prog. A Prog. A Prog. A Prog. A start There are 4 choices for your days selection: CAL - Select days of the week. (All days are ON as the default) Int - Select days interval, 1-7 days, and the 1st day to start the interval Odd - Irrigation on Odd days (31st day is skipped) En - Irrigation on Even days. -
Page 8: Water Budget (Season Adjust)
Dial position: WATER BUDGET (Seasonal adjust) In this dial position you can increase or decrease the RUN TIME of all stations in that program by percentage scaling from 0% to 200% in 10% increments. Press PROG to select the program you wish to scale. Press +/ON or -/OFF to change. -
Page 9: Manual Programs
Dial Position: MANUAL PROGRAMS The MANUAL PROGRAMS mode allows the immediate start of an entire program (A, B or C). When using the MANUAL PROGRAMS feature, the DDCWP will essentially override the normal start time and begin immediately. Using MANUAL PROGRAMS does not affect the previously scheduled run times. They will begin as programmed once the MANUAL PROGRAMS feature has completed its cycle. -
Page 10: Auto-Run
Press NEXT to set next function OR Press DIAL to move to AUTO-RUN PROGRAM ERASE – You can erase all program information for a selected program. This can be done for any selected program. Press NEXT to select the program to erase. Press +/ON to erase. -
Page 11: Automatic Voltage Detection
Return the defective part to your local Toro distributor, who may be listed in your telephone directory Yellow Pages under "Irrigation Supplies" or "Sprinkler Systems," or contact The Toro Warranty Company P.O. -
Page 12: Custom Watering Plan
Odd Even Start 1 Start 2 Start 3 Electromagnetic Compatibility This controller complies with European, United States and Australian electromagnetic compatibility standards. The Toro Company www.toro.com Ask for Customer Service TORO AUSTRALIA TORO USA TORO EUROPE T: 1300 130898 T: +00 1-951-688-9221...