Related Manuals for Sharp LC-90LE757E
Summary of Contents for Sharp LC-90LE757E
- Page 1 MODEL LC-90LE757E LC-80LE657E LC-70LE747E LC-90LE757RU LC-80LE657RU LC-70LE747RU LC-90LE757K LC-80LE657EN LC-70LE747EN LC-80LE657KN LC-70LE747KN OPERATION MANUAL LCD COLOUR TELEVISION...
- Page 2 This bundled Wireless LAN USB adapter is designed for indoor use only. CE Statement: Hereby, SHARP Electronics declares that this LCD TV is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at:...
-
Page 3: Table Of Contents
[ ENGLISH ] Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. -
Page 4: Important Safety Precautions
Introduction Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a • Headphones—Do not set the volume at a high level. Hearing experts advise against damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. extended listening at high volume levels. - Page 5 Introduction Caring for the front panel Handling the 3D glasses • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the glass section, which may result in injury.
-
Page 6: Supplied Accessories
Introduction Supplied accessories Optional accessories The listed optional accessories are available for this LCD colour TV. Please Remote control unit ( x 1) “AAA” size battery ( x 2) purchase them at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. -
Page 7: Preparation
Preparation Attaching the stand unit w For 70 inch models • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work, spread cushioning over the surface on which you will be laying Long screws Stand base the TV. - Page 8 Preparation Insert and tighten the M5 screws (length: 14 mm) into the holes on the rear of the TV. Short screws NOTE • To detach the stand unit, perform the steps in reverse order. • A screwdriver is not supplied with this product. •...
-
Page 9: Using The Remote Control Unit
Preparation Using the remote control unit Inserting the batteries Angle of the remote control unit Before using the TV for the first time, insert the two supplied “AAA” size Use the remote control unit by pointing it towards the remote control sensor. batteries. -
Page 10: Part Names And Functions
Part names and functions TV (front/side view) TV (rear view) — continued w For 70 inch models SD CARD (VIDEO STORE) slot a (Standby/ON) OUTPUT (Headphones/ AUDIO (L/R)) terminal* MENU (Menu) Illumination LED* USB 1 port b (Input source) HDMI 1 (HDMI/ARC) :r/s terminal (Programme... -
Page 11: Remote Control Unit
FR/G/Y/B (Colour) buttons LC-80LE657E/RU Display the station information (channel (Sweden, Norway, Finland, Denmark The coloured buttons are LC-90LE757E/RU/K number, signal, etc.) on the screen. or Iceland) are selected in the country correspondingly used to select the setting from initial auto installation coloured items on the screen (e.g., EPG,... -
Page 12: Quick Guide
Quick guide Operation overview Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection. 1. Preparation — Connecting the TV 2. Preparation — Setting the TV w For 70 inch models w For 80/90 inch models w For 70 inch models... -
Page 13: Advanced Features
Quick guide 3. Daily operation 4. Advanced features 5. Enjoy additional features Turn on/off the TV Use USB-recording function Connect external devices (Pages 52_54) (Page 19) Connection overview • You can turn on/off the (Pages 27_32) power using both the •... -
Page 14: Inserting The Ca Card Into The Ci Module
Quick guide NOTE Inserting the CA card into the CI CI plus 1.3 Standard • It takes a few minutes to certify the licence key when module you insert a CA card into the CI+ compatible CI module CI Plus is an advanced development of the DVB for the first time. -
Page 15: Using The Home Screen
Home network functions and to perform settings for the TV. HOME menu contents This product is embedded with LC Font technology, which was developed LCFONT by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. Main information display zone... -
Page 16: Using The Menu Screen
Quick guide Using the Menu screen Using Software keyboard You need to call up the OSD to perform settings for the TV. The OSD for the Use the software keyboard when you need to input text. settings is called “Menu”. The “Menu” enables various settings and adjustments. Display the Menu screen ... -
Page 17: Initial Auto Installation
Initial auto installation Setting the country. Starting channel search. Initial auto installation Press a/b/c/d to select your country or area, and then press ;. When the TV is powered on for the first time after Digital search • This setting screen only appears during the initial purchase, the initial auto installation wizard appears. - Page 18 Initial auto installation Press a/b to select “Search start”, and then Set up “Symbol rate 2” if the cable provider uses Digital broadcast setting press ;. several symbol rates. Details about the “Search method” items are as Press c/d to select “Yes” to start searching Press c/d to select “Terrestrial”...
- Page 19 Initial auto installation “Single satellite” setting Search start: Searching for satellite broadcasts DVB-S/S2 channel searching. Press a/b to select “Single satellite”, and then Press c/d to select “Yes”, and then press ;. Press a/b to select “Satellite search”, and then press ;.
-
Page 20: Supplying Power To The Antenna
Initial auto installation Checking channel strength Position and align the antenna so that the Checking signal strength and maximum possible values for “Signal strength” Press a/b to select “Channel strength”, and channel strength (DVB-T/T2/C/S/S2) and “Quality” are obtained. then press ;. NOTE •... -
Page 21: Watching Tv
Watching TV Daily operation Switching between digital, satellite Selecting an external video source and analogue broadcasts Once the connection is made, press b to display Switching on/off the “INPUT” screen, and then press b or a/b to Watching digital Watching analogue switch over to the appropriate external source with broadcasts broadcasts... -
Page 22: Selecting A Sound Mode
Watching TV Time display in channel information A2 TV broadcasts selection Selecting a sound mode You can display the time information included in Signal Selectable items DTV, SAT and teletext broadcasts. DTV/SAT mode Stereo STEREO, MONO NOTE Bilingual CH A, CH B, CH AB If multi sound modes are received, each time you •... -
Page 23: Favourite Channel Information
Watching TV Selecting channels from “My favourite” list Favourite Channel Information How to move between “My favourite” list and “CH list”. Before installation Press the ; button when you watching DTV This function allows you to group your favourite or SAT to bring up the “CH list”. channels in a separate list. -
Page 24: Epg
Watching TV Option Genre icon setup EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule You can grey out or place a mark on desired genres for DTV/SAT/RADIO/DATA, view detailed information and smoothly search for programmes you frequently about them and tune to an event currently on-air. -
Page 25: Selecting A Programme Using Epg
Watching TV 4 Search a programme in a 5 Search for a programme by Selecting a programme using EPG category date/time The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG. Press G. Press Y. - Page 26 Watching TV Timer setup using EPG Cancelling the timer setup The TV can be switched to a programme or start Press EPG. recording for USB-recording at the set time. Press a/b/c/d to select the programme with Press EPG. timer setup, and then press ;. Press a/b/c/d to select the programme you Press c/d to select “Cancel”, and then press ;.
-
Page 27: Teletext
Watching TV NOTE Teletext • Teletext will not work if the selected signal type is RGB (Page 47). What is teletext? • Teletext will not work in 3D mode. Teletext broadcasts pages of information and Buttons for teletext operations entertainment to specially equipped TV. Your Buttons Description TV receives teletext signals broadcast by a TV... - Page 28 Watching TV MHEG-5 application (UK only) View setting Using data service Data service setting Some services bring you programmes with the Press a/b/c/d to select a desired option, MHEG application encoded, letting you experience and then press ;. The selected service will be Set the Hbb TV service starting settings (“On”, DTV interactively.
-
Page 29: Connecting External Devices
Connecting external devices Introduction to connections ø 3.5 mm stereo minijack cable HDMI device (Page 28) The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s DVI/HDMI cable terminal and connect the device. Before connecting ... •... -
Page 30: Video Connections
Connecting external devices DVI/HDMI conversion Video connections Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally. HDMI connection • When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly. -
Page 31: Scart Connection
Connecting external devices SCART connection Component connection Example of connectable devices Example of connectable devices DVD player/recorder DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device. ... -
Page 32: Audio Connections
Connecting external devices Audio connections VIDEO connection Speaker/amplifier connection Example of connectable devices Connect an amplifier with external speakers as shown below. DVD player/recorder Connecting an amplifier with digital/analogue audio inputs Game console Camcorder You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device. -
Page 33: Aquos Link
AQUOS LINK w Multiple control of HDMI devices Controlling HDMI devices using You can select which HDMI device to operate using AQUOS LINK the “Link operation” menu. NOTE What is AQUOS LINK? • When you use AQUOS LINK, make sure to use a Using the HDMI CEC protocol, with AQUOS LINK certified HDMI cable. -
Page 34: Aquos Link Connection
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/ AQUOS recorder that supports the HDMI CEC protocol. Connecting an AQUOS BD player/AQUOS recorder via the AQUOS Connecting an AQUOS BD player/AQUOS recorder only AUDIO speaker system AQUOS BD player/AQUOS recorder AQUOS AUDIO speaker system... -
Page 35: Aquos Link Setup
AQUOS LINK AQUOS LINK setup Operating an AQUOS LINK device Using genre info. This function allows you to automatically switch AQUOS LINK allows you to operate the HDMI- Basic operation to the appropriate sound mode depending on the connected device with a single remote control unit. genre information included the digital broadcast. - Page 36 AQUOS LINK Top menu/title list Recorder EPG Model select This section explains how to play back a title in the You can call up the CEC-compatible recorder’s EPG If multiple HDMI devices are connected in a daisy AQUOS BD player/AQUOS recorder. and preset timer recordings using the TV’s remote chain, you can specify which device to control here.
-
Page 37: Using A Smartphone With The Tv
AQUOS LINK Auto Power On Using a Smartphone with the TV When an MHL-compatible device is connected to the TV, the TV turns on automatically. This function enables you to connect the TV to a smartphone that supports • This function operates when “AQUOS LINK Control” is set Mobile High-Definition Link (MHL) using an MHL-compatible cable. -
Page 38: Basic Adjustment
Basic adjustment Item Picture settings Picture The TV automatically sets the appropriate selection from the “AV Go to “TV Menu” > “Setup” > “Picture”. AUTO mode” menu depending on the Automatically adjusts the brightness of the screen. lighting conditions and the type of Menu Item programme watched. -
Page 39: Picture Adjustments
Basic adjustment Picture Picture Colour temp. Picture adjustments Advanced Adjusts the colour temperature to give the best white image. Adjusts the picture to your preference with the This TV provides various advanced functions for following picture settings. optimising the picture quality. Item Adjustment items Go to “TV Menu”... - Page 40 Basic adjustment Gamma adjustment Selects the tone difference of the brightness and “DNR” produces a clearer image (“Auto”, “High”, darkness of the image according to the type of “Middle”, “Low”, “Off”). programme watched from a maximum of e2 to a NOTE minimum of f2.
-
Page 41: Audio Settings
Basic adjustment Audio settings Audio Audio Audio adjustment Bass enhancer Go to “TV Menu” > “Setup” > “Audio”. You can adjust the sound quality to your preference This function allows you to enjoy bass-enhanced Menu with the following settings. sound. CH list Setup c (Cursor) -
Page 42: Power Save Settings
Basic adjustment Power save settings Energy save No operation off Go to “TV Menu” > “Setup” > “ECO”. This function enables you to reduce the backlight The TV will automatically enter standby mode if no Menu brightness in order to decrease the power operations are performed in three hours if “Enable”... -
Page 43: View Settings
Basic adjustment Press a/b to select the broadcast standard View settings Digital setting you want to search, and then press ;. Digital search Go to “TV Menu” > “Setup” > “View setting”. Terrestrial After selecting the service you want to search, Menu You can reconfigure the following settings when you either “Terrestrial”... - Page 44 Basic adjustment Before selecting the type of search in “Satellite Cable Buttons for “Manual adjust” operation setting”, you need to select the satellite broadcast. Lock Press R button. You can reconfigure the following settings when you When the service is locked, you must enter your select “Cable”...
-
Page 45: Analogue Setting
Basic adjustment Sort Analogue setting Sound sys. Channel positions can be sorted freely. You can reconfigure the analogue TV channels Press c/d to select “Yes”, and then press ;. Select the optimum sound systems (broadcasting settings automatically or manually. Press a/b/c/d to select the channel you systems) to receive (“B/G”, “D/K”, “I”, “L/L’”). -
Page 46: Individual Setting - Pin
Basic adjustment Individual setting — PIN View setting Individual setting — Clock Parental rating View setting View setting This function allows DTV services to be restricted. Clock setup It prevents children from watching violent or sexual scenes that may be harmful. Allows you to use a PIN to protect certain settings You can adjust the time manually and change the Go to “TV Menu”... -
Page 47: Individual Setting - Language
Basic adjustment Set “For hearing impaired” to “Yes” Individual setting — Language Subtitles for the hearing impaired have priority over each of the subtitle language settings (e.g., “1st View setting language”, “2nd language”, etc.). Digital audio language EXAMPLE Set up to three preferred multi audio languages to 1st language 1st language display if the audio languages are available. -
Page 48: Useful Viewing Functions
Useful viewing functions Item (for SD [Standard-Definition] signals) Optional features settings Selecting the picture size automatically Keeps the original aspect ratio in a full Normal screen display. Go to “TV Menu” > “Setup” > “Option”. Option For 14:9 letterbox pictures. A thin Auto wide (only DTV/SAT mode) Menu side bar appears on each side, and... -
Page 49: Digital Audio Output
Useful viewing functions Terminal setting Option Skipping specified inputs Input label Option Option You can label each input source with a custom Digital audio output Input skip description. This function allows you to select the digital audio Press b to select the desired input source This setting allows you to skip the inputs on the from the “INPUT”... -
Page 50: Programme Title Display
Useful viewing functions NOTE Option Option • This function does not work when “Change audio Headphone/Audio out select Programme title display output device” (Page 34) is set to “By AQUOS audio SP” or “Headphone/Audio out select” is set to “Audio out”. You can select which device is used for outputting This function allows you to display programme •... -
Page 51: Additional Features
• Images are displayed as a slideshow in 3-minute intervals. You can reduce the TV’s start-up time after turning With this function activated, the SHARP logo will be • As a USB device cannot be detected immediately after on the power with the remote control unit. -
Page 52: Game Play Time
Useful viewing functions Option Option Game play time Key lock This function allows you to display the elapsed time This function allows you to lock the buttons on the on the screen when “AV mode” is set to “GAME”. TV or remote control unit in order to prohibit children from changing the channel or volume. -
Page 53: Other Useful Features
Other useful features USB-recording USB HDD registration It is necessary to first perform USB HDD registration You can enjoy DTV/SAT recording or playback by for USB HDDs used for USB-recording. connecting a commercially available USB HDD to the TV. Directly connect only one USB HDD to the USB •... -
Page 54: How To Operate Usb-Recording
REC E is pressed or when a USB-recording minutes. timer setting is started. SHARP corporation bears no responsibility regarding Reverse (each time you press this • The PIN is required when you use the buttons such as compensation for content when recording cannot does... -
Page 55: Timer List
Other useful features • A message will be displayed when the scheduled time USB-recording Manual clock setting overlaps with an existing schedule. Make changes in accordance with the on-screen instructions. You can record the programme you are watching to When the TV cannot receive the time via digital •... -
Page 56: Time Shift Playback
Other useful features Counter Time shift playback View setting Jump time setting The counter displays on the screen with the control Playback recorded scenes of the programme being panel. recorded. You can set the time interval for playback to resume Press during recording. -
Page 57: Usb Media/Home Network
Other useful features USB media/Home network Photo mode Selecting modes and drives/servers Press B. USB media/Home network Viewing thumbnails In both modes, you can enjoy viewing photos, When the USB media menu is displayed listening to music and watching videos from external 1 Press a/b to select “Select USB drive”, and then USB devices (USB Memory, USB card reader (Mass press ;. -
Page 58: Music Mode
Other useful features When music is being played: Stop music. Music mode Viewing enlarged photos When music is stopped: All*: Return to the thumbnail selection screen. Buttons for enlarged photo display operation Folder*: Return to the upper folder. When the top folder is displayed, return to the thumbnail (When using USB media mode) selection screen. -
Page 59: Video Mode
Other useful features Buttons for playing mode Video mode Disconnecting the USB device (When using USB media mode) When you disconnect the USB device, be sure to Buttons for file selecting operations Buttons Description the following steps. (When using USB media mode) When video is being played: Pause the video. -
Page 60: Usb Device Compatibility
Other useful features Video file format View setting Home network server compatibility DivX® setup File Container Video Audio extension Photo file format JPEG DivX This is the function to confirm your registration code. Music file format LPCM, MP3 3.11/4.x/5.1/6.0 You need to register the code at www.divx.com. Dolby Digital XviD MPEG2-PS, MPEG2-TS, WMV, ASF,... -
Page 61: Connecting A Pc
Connecting a PC Connecting a PC Displaying a PC image on the TV Analogue connection PC terminal* Selecting the picture size HDMI connection You can select the picture size. HDMI 1, 2, 3 or 4 terminal Press f. • The “Wide mode” menu displays. Press f or a/b to select the desired item. -
Page 62: Adjusting The Pc Image Automatically
Connecting a PC Adjusting the PC image Adjusting the PC image manually automatically Option Fine sync. Option Auto sync. Ordinarily you can easily adjust the picture as necessary to change image position using “Auto This function enables the screen to be automatically sync.”. - Page 63 Connecting a PC PC compatibility chart Horizontal Vertical Analogue Digital VESA Resolution frequency frequency (D-Sub) (HDMI) standard ✔ ✔ ✔ 640 x 480 31.5 kHz 60 Hz ✔ ✔ ✔ SVGA 800 x 600 37.9 kHz 60 Hz ✔ ✔ ✔...
-
Page 64: Pc Control Of The Tv
Connecting a PC Command format PC control of the TV IP Control setup Eight ASCII codes +CR • When a programme is set, the TV can be controlled Go to “HOME” > “IP Control” > select “Change”. C1 C2 C3 C4 P1 P2 P3 P4 from the PC using RS-232C or IP. - Page 65 Connecting a PC Command list CONTROL CONTROL CONTROL COMMAND PARAMETER CONTROL CONTENTS COMMAND PARAMETER CONTROL CONTENTS COMMAND PARAMETER CONTROL CONTENTS ITEM ITEM ITEM POWER P O W R 0 _ POWER OFF AV MODE A V M D 0 _ TOGGLE SURROUND A C S U 0 _ SURROUND TOGGLE...
-
Page 66: Network Setup
Network setup Press a/b to select “Wired”, and then press Connecting to the network Wired installation Use an ETHERNET cable to connect the ETHERNET Confirm the message on the screen and then To enjoy internet services, you need to connect the press ;... - Page 67 manual of the router. Wireless LAN USB adapter (supplied) the rear of the TV. • See page 85 to check the supplied SHARP wireless LAN Network • Do not use a wireless LAN adapter other than adapter specifications.
-
Page 68: Net Tv
DISCLAIMERS Press > to exit. • When switching to Net TV, a message which requests a • SHARP corporation bears no responsibility regarding software update may display in some cases. the content and quality of the content provided by the content serve provider. - Page 69 Net TV Reload NOTE Rent and download a video • PIN input is required when executing “Clear Net TV Refreshes the page you are browsing. If an error memory”. The default PIN is “1234”. To change the PIN occurs while loading the page, execute this function With Net TV, you can rent a video from “Video setting, refer to Individual setting —...
-
Page 70: Enjoying 3D Image Viewing
Enjoying 3D image viewing • When children are viewing 3D images, be sure a parent or guardian is present. Monitor You can enjoy 3D-supported images on this TV when you wear 3D glasses (AN- children viewing 3D images, and if they show signs of discomfort, immediately 3DG40), sold separately. -
Page 71: Preparing For The 3D Glasses
Enjoying 3D image viewing Power button Preparing for the 3D glasses Part Names • When the power button is pressed for 2 or more seconds with the power off, pairing with the TV starts. Supplied accessories • When the power button is pressed for 2 or more seconds with the power on, the power turns off. -
Page 72: Using The 3D Glasses
Enjoying 3D image viewing Using the 3D glasses Using the 3D glasses Switching to 3D and 2D Mode When viewing 3D images, you can press the power Before using the 3D Glasses button to switch between 2D and 3D modes. This is useful when several people are viewing 3D images Before using the 3D glasses for the first time, on the same TV with some people wanting to watch... - Page 73 Enjoying 3D image viewing Replace the battery. Replacing the Battery Use the tip of a ballpoint pen or similar object to remove the battery. The battery has an expected service life of Insert a new battery. approximately 75 hours. • Insert the battery with the negative side (-) •...
-
Page 74: Cautions For 3D Image Viewing
• You may not be able to use several menu items while you are watching the TV in 3D mode. • You cannot use the 3D function in radio or data mode. NOTE • These 3D glasses are only for use with SHARP LCD TVs supporting 3D. -
Page 75: Display Format For 3D And 2D Images
Enjoying 3D image viewing Display format for 3D and 2D images Image for input Selectable mode Description signals 2D s 3D • Converts normal 2D images into 3D images. • Creates 3D images from 3D images displayed 3D mode side by side. The image is split into a left and right (using the 3D Side by Side image, and then the images are stretched and... -
Page 76: Viewing 3D Images
Enjoying 3D image viewing Press c/d to select “3D” or “2D”, and then Turn on the power of the 3D glasses, and then Viewing 3D images press ;. wear the 3D glasses. NOTE To view in 3D mode • If you do not want to switch to 3D mode automatically, Press c/d to select the 3D signal type (“2D set “3D auto change”... -
Page 77: Configuring The Tv Settings To Enhance 3D Image Viewing
Enjoying 3D image viewing Watching 2D images in 3D 3D Menu Configuring the TV settings to enhance 3D image viewing You can convert normal 2D images into 3D images. Pressing 3D in 3D mode displays the 3D menu. Press the coloured buttons to make the necessary Press 3D. - Page 78 Enjoying 3D image viewing NOTE 3D brightness boost (657/757 series only) 3D depth control • This function is only available when converting 2D images to 3D images. You can adjust the backlight of the TV for 3D image Select the method for adjusting the 3D image effect •...
-
Page 79: Specifications - 3D Glasses (Sold Separately)
Enjoying 3D image viewing Specifications — 3D glasses (sold separately) Troubleshooting — 3D Images Problem Possible solution Product 3D Glasses • 3D images are not • Is “3D auto change” set to “Off”? Press 3D to switch to Model number AN-3DG40 displayed. -
Page 80: Appendix
Appendix Troubleshooting Problem Possible solution • No sound. • Is the volume too low? • If you do not clearly hear the sound for the visually impaired, • No power. • Is the AC cord disconnected? go to “TV Menu” > “Setup” > “Audio” > “Audio description •... - Page 81 Appendix Reset the PIN Go to “TV Menu” > “Setup”. Press a/b to select “Auto installation”, “Programme setup”, “PIN”, “Parental rating” or “Reset”, and then press ;. The PIN input window will display. Press and hold both :r and i+ on the TV simultaneously until the message appears on the screen.
-
Page 82: Updating Your Tv Via Dvb-T/T2/C/S/S2
Ensure that your TV software version is always up to Picture / Audio test message “New download information has been date. From time to time SHARP will make updated detected.” appears.* TV base software and DVB software available. When external equipment is connected with the •... -
Page 83: Information On The Software Licence For This Product
Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Deactivating Netflix function CAUTION • Be sure to insert the USB device correctly into the Information terminal. -
Page 84: Trademarks
• LC_ LCFONT+ and LC logo mark are registered trademarks of SHARP Corporation. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on an LCD screen. However, other non-LCD fonts are used for displaying some screen http://www.espial.com... -
Page 85: Software Licences For Net Tv
Appendix Software licences for Net TV Disclaimers for services using the Internet This product includes the Opera™ DISCLAIMERS browser. • • This product contains fonts provided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. -
Page 86: Specifications
EXT 1 SCART (AV input, Y/C input, RGB input, TV output) • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The EXT 2 RCA pin (AV input/AUDIO L/R) performance specification figures indicated are nominal values of production units. -
Page 87: Specifications (Wireless Lan Usb Adapter)
WEP64, WEP128, TKIP and AES encryptions. 16-QAM@24 Mbps • Using a wireless LAN adapter other than the supplied SHARP wireless LAN adapter 64-QAM@48/54 Mbps and above, Rx up to 300 may result in radio communications that do not comply with regulations on radio Mbps communications. -
Page 88: Environmental Specifications
90o/80o/70o LC-70LE747E/LC-70LE747RU/LC-70LE747EN/LC-70LE747KN I On-mode (W) (in home-mode) 166W/131W/135W • This TV should be mounted on a wall only with a SHARP wall mount bracket (Page 4). J Energy-Save-Mode (W) Advanced 128W/104W/95W The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. -
Page 89: Wall Mount Kit Specifications
• Do not fasten the screws too firmly or loosely. This may damage the product or cause yourself or others if you choose to install the wall mount on your own. the product to fall, leading to personal injury. SHARP is not liable for these kinds of CAUTION accidents. - Page 90 Appendix Rating table for child lock Abbreviation list Abbreviated term Stands for Broadcasted rating Audio Return Channel User-adjusted rating Analogue TV 10 11 12 13 14 15 16 17 18 Consumer Electronics Control DivX® Digital Video Xtreme® Universal ✔ — —...
-
Page 91: Dimensional Drawings
Appendix Dimensional drawings LC-70LE747E LC-80LE657E LC-70LE747RU LC-80LE657RU LC-70LE747EN LC-80LE657EN LC-70LE747KN LC-80LE657KN (51,0)* (63) (1613) (1862) (99) (89,0) (1538.88)* (1771.20) (136) (179) (1538,88)* (1771,20) (536) (333) (737) (434) (400) (600) (215) (421) Active area Thinnest part (except of terminal height) NOTE •... - Page 92 Appendix LC-90LE757E LC-90LE757RU LC-90LE757K 2054 1992.96 Active area Thinnest part (except of terminal height) NOTE • Dimensions do not include protrusions such as screws and some parts.
-
Page 93: Eu Energy Label For Televisions
The retailer or online shop where you purchased your television from would have displayed the label and its corresponding rating. If in doubt please consult them. In addition to saving energy some Sharp LCD televisions also carry the EU Ecolabel, a voluntary environmental label that is awarded to goods which meet the environmental requirements of the EU ecolabelling scheme (for details see http://ec.europa.eu/environment/ecolabel/). - Page 94 13P05-PL-NG...