Brother HL-1110 Product Safety Manual
Hide thumbs
Also See for HL-1110:
- User manual ,
- Service manual (91 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Quick Links
Product Safety Guide
Please read this guide before attempting to operate the product, or before attempting any
maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical
shock, burns or suffocation. Brother shall not be liable for damage caused where the product owner
has failed to follow the instructions set out in this guide.
Read all of the instructions. Save them for later reference.
Symbols and
conventions used in the
documentation
The following symbols and conventions are
used throughout the documentation.
WARNING
WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injuries.
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injuries.
IMPORTANT
IMPORTANT indicates a potentially
hazardous situation which, if not avoided, may
result in damage to property or loss of product
functionality.
NOTE
Notes tell you how you should respond to a
situation that may arise or give tips about how
the operation works with other features.
Version 0
ARL/ASA/NZ/GLF
(HL-1110 / HL-1111 / DCP-1510 / DCP-1511 / DCP-1514 /
MFC-1810 / MFC-1811 / MFC-1814 / MFC-1815)
Prohibition icons indicate actions
that must not be performed.
Electrical Hazard icons alert you to
possible electrical shocks.
1
Fire Hazard icons alert you to the
possibility of a fire.
Hot Surface icons warn you not to
touch product parts that are hot.
Bold
Italics
Courier
New
Follow all warnings and instructions marked
on the product.
NOTE
• Not all models are available in all countries.
• The illustrations in this guide show the
HL-1110 and MFC-1810.
Bold typeface identifies specific
buttons on the product's control
panel or on the computer
screen.
Italicized typeface emphasizes
an important point or refers you
to a related topic.
Text in the Courier New font
identifies messages on the
LCD of the product. (MFC and
DCP only)
1
1
Advertisement
Table of Contents
Related Manuals for Brother HL-1110
Summary of Contents for Brother HL-1110
- Page 1 Failure to follow these instructions may result in an increased risk of fire, electrical shock, burns or suffocation. Brother shall not be liable for damage caused where the product owner has failed to follow the instructions set out in this guide.
-
Page 2: Compilation And Publication Notice
Compilation and Publication Notice Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. - Page 3 DO NOT place the product near chemicals or in a place where chemical spillage could occur. In particular, organic solvents or liquids may cause the casing and/or cables to melt or dissolve, risking fire or electric shock. They may also cause the product to malfunction or become discoloured.
- Page 4 • DO NOT place your product next to sources of interference, such as speakers or the base units of non Brother cordless telephones. Doing so may interfere with the operation of the product's electronic components. • Disruption of power can delete information from the product’s memory.
-
Page 5: General Precautions
General precautions WARNING Plastic bags are used in the packing of your product. To avoid danger of suffocation, keep these plastic bags away from babies and children. Plastic bags are not toys. • DO NOT put a toner cartridge or a toner cartridge and drum unit assembly into a fire. It could explode, resulting in injuries. - Page 6 For more safety information regarding the toners used in your product, visit the following web address to read the Safety Data Sheets (SDS) http://sds.brother.co.jp/sdsapp/index.html. HOT SURFACE After you have just used the product, some internal parts of the product will be extremely hot.
- Page 7 (MFC only) Use caution when modifying telephone lines. Never touch exposed telephone wiring or terminals unless the telephone line has been unplugged at the wall socket. Never fit telephone wiring during an electrical storm. Never fit a telephone wall socket in a wet location. Doing this might cause an electrical shock.
- Page 8 (HL only) The top cover of the product will be hot, during and after using the product. DO NOT touch or place anything on the top cover, shown by the shaded area in the illustration. IMPORTANT • DO NOT remove or damage any of the caution or warning labels inside the product. •...
- Page 9 • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. <Toner cartridge> <Drum unit> • When cleaning the machine, use neutral detergents. Cleaning with volatile liquids such as thinner or benzene will damage the surface of the machine. •...
-
Page 10: Connecting The Product Safely
Connecting the product safely WARNING There are high voltage electrodes inside the product. Before you clean the inside of the product, make sure you have unplugged the telephone line cord first (MFC only) and then the power cord from the electrical socket. Doing this will prevent an electrical shock. (Example for Australia and New Zealand) DO NOT handle the plug with wet hands. - Page 11 Doing so may cause the cord to become worn or frayed. DO NOT use the product if the power cord is frayed or damaged. Doing so may cause an electrical shock or a fire. Brother strongly recommends that you DO NOT use any type of extension cord.
- Page 12 Important Information for Australia IMPORTANT-For Your Safety To ensure safe operation the three-pin plug supplied must be inserted only into a standard threepin power point which is effectively grounded through the normal household wiring. The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the installation is completely safe.
- Page 13 Important Information for New Zealand IMPORTANT-For Your Safety To ensure safe operation the three-pin plug supplied must be inserted only into a standard threepin power point which is effectively grounded through the normal household wiring. The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the installation is completely safe.
- Page 14 MFC only 1 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.
- Page 15 15 Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom’s Specifications: There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation.
- Page 16 Important Information for Some Countries Important Safety Instructions 1 This product is equipped with a three-wire grounded plug, a plug having two or three pins. This plug will fit into only an earthed power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.
- Page 17 • Brother cannot accept any financial or other responsibilities that may be the result of your use of this information, including direct, special or consequential damages. There are no warranties extended or granted by this document.
-
Page 18: Servicing The Product
WARNING If the product has been dropped or the casing has been damaged, there may be the possibility of an electric shock. Unplug the product from the electrical socket and call Brother customer service or your local Brother dealer. CAUTION If the product becomes unusually hot, releases smoke, generates any strong smells, or if you accidentally spill any liquid on it, immediately unplug the product from the electrical socket. - Page 19 Product Warranty & Liability Brother shall not be liable for any loss or damage that may arise from the use of the information contained herein (including, without limitation, any direct, special or consequential damages). Nothing contained herein shall affect any existing product warranty, or be construed as granting any additional product warranty.
-
Page 20: Disconnect Device
IEC60825-1:2007 Specification (For 220-240V Models Only) This product is a Class 1 laser product as defined in IEC60825-1:2007 specifications. The label shown below is attached in countries where required. This product has a Class 3B Laser Diode which emits invisible laser radiation in the Laser Unit. - Page 21 This will benefit the environment for all. For detailed information, please refer to the following Brother India website: <<http://welcome.brother.com/in-en.html>>...
-
Page 22: Copyright And License
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies. -
Page 23: Unlawful Use Of Copying Equipment (Mfc And Dcp Only)
Unlawful use of copying equipment (MFC and DCP only) It is an offence to make reproductions of certain items or documents with the intent to commit fraud. The following is a non-exhaustive list of documents which it may be unlawful to produce copies of. - Page 24 www.brotherearth.com...