Table of Contents
Advertisement
Power
Cannot turn on SELPHY
•
Confirm that the power cord is connected and plugged in correctly
•
Hold the <q> button until the startup screen is displayed
•
When using Battery Pack NB-CP2L and Charger Adapter CG-CP200 (both sold
separately), confirm that the battery pack is charged and inserted correctly, and that
the cable is connected correctly.
Screen
[?] is displayed instead of images
•
Display is not possible because the image has no thumbnail. You can check the
image before printing by pressing the <-> button for full-screen display.
Printing
Cannot print
•
Confirm that SELPHY is on
(=
12).
•
Confirm that the paper and ink cassettes are loaded correctly
•
Confirm that the ink sheet is not loose
(=
•
Confirm that you are using paper designed especially for SELPHY
•
Replace the ink cassette and refill the paper cassette as needed
•
Confirm that you are using the correct combination of paper, paper cassette, and ink
cassette
(=
8).
•
SELPHY will temporarily halt printing if it exceeds a specific temperature; this does
not indicate a problem. Wait until the printer cools off. During continuous printing, in
hot environments, or if the printer's interior becomes hot because the rear-side air
vent
(=
5) is blocked, SELPHY may temporarily stop printing, causing printing to
take longer.
(=
10).
(=
12).
(=
10).
8).
(=
9).
(=
15).
Cannot display or print images on memory cards or USB flash drives
•
Confirm that the memory card is fully inserted in the correct slot, with the label face-
up
(=
13, 14).
•
Confirm that the USB flash drive is fully inserted, right-side up
•
Confirm that the image format is supported
•
Confirm that a memory card requiring the use of an adapter has not been inserted
without its adapter
(=
13).
Cannot print from a camera
•
Confirm that your camera supports PictBridge
•
Confirm that SELPHY and the camera are connected correctly
•
Confirm that your camera batteries have enough charge left. If the batteries are
depleted, replace them with fully charged or new ones.
Cannot print from a computer
•
Confirm that you have installed the printer driver correctly
•
Remove any inserted memory cards or USB flash drives.
•
When printing via Wi-Fi, confirm that both SELPHY and the computer are correctly
connected to the access point
(=
37).
•
When printing via USB, confirm that SELPHY is connected directly to the computer
with the USB cable
(=
50).
•
Windows: Confirm that the printer is not offline. If so, right-click the printer icon and
bring the printer online.
•
Macintosh: Confirm that you have added SELPHY to the Printer List
No date when printing from memory cards or USB flash drives
•
Confirm that SELPHY is set up to print the date
Note that in DPOF printing, date printing is configured on the camera.
No date when printing from cameras
•
Confirm that the date setting is enabled on the camera. Note that under standard
camera settings, the date setting on SELPHY will be used.
(=
16).
(=
13).
(=
52).
(=
52).
(=
49).
(=
43).
(=
28).
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
54
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
