Page 1: User Manual
Plasma TV user manual E-MANUAL imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model _____________ Serial No. _____________...
Page 2 SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.
Page 3 Accessories ✎ Please make sure the following items are included with your TV. If any items are missing, contact your dealer. ✎ The items’ colors and shapes may vary depending on the model. ✎ Check that there are no accessories hidden behind or under packing materials when you open the box. y Remote Control (AA59-00482A) &...
Page 4 ﬁre or a problem with the TV caused by an increase in its internal temperature. ✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only. If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
Page 5 Install the Stand See the separate stand installation guide for more detailed instructions. 51 inches model only (PN51D550) ($ ($ & [ 0 ; / [ 0 ; / Stand (1EA) Guide Stand (1EA) Screws (8EA) 7RS 9LHZ &...
Page 6 59 inches model only (PN59D550) & [ 0 ; / [ 0 ; / 6WDQG GHSHQGLQJ RQ WKH PRGHO Guide Stand Screws 7RS 9LHZ & 0 ; / )URQW $77(17,21 ✎ 5HDU Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen side down.
Page 7 Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Page 8 Remote Control Buttons ✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons. Displays and selects the available video Turns the TV on and off. sources. Gives direct access to channels. Press to select additional digital channels Returns to the previous channel.
Page 9 How to Navigate Menus How to Operate the OSD (On Screen Display) The access steps may differ depending on the selected Before using the TV, follow the steps below to learn how to menu. navigate the menu and select and adjust different functions. MENU The main menu options appear on the screen:...
Page 10 Plug & Play (Initial Setup) When you turn the TV on for the ﬁrst time, a sequence of on-screen prompts will assist in conﬁguring basic settings. To turn on the TV, press the POWER3 button. ✎ Plug & Play is available only when the Source is set to TV. ✎...
Page 11 Connecting to an AV Device Using an HDMI or an HDMI to DVI Cable: HD connection (up to 1080p) We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD player, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver $XGLR &DEOH 1RW 6XSSOLHG Device +'0, &DEOH 1RW 6XSSOLHG...
Page 12 Connecting to an Audio Device Using an Optical (Digital) Cable Connection Available devices: Digital Audio System, Ampliﬁer, DVD home theater Digital Audio System 2SWLFDO &DEOH 1RW 6XSSOLHG OPTICAL ✎ DIGITAL AUDIO OUT (OPTICAL) When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
Page 13: Edit Name
PC Display Modes (D-Sub and an HDMI to DVI Input) Optimal PC resolution is 1920 x 1080 @ 60 Hz. You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. Horizontal Frequency Vertical Frequency Pixel Clock Frequency...
Page 14 If you select Pure High-throughput (Greenﬁeld) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certiﬁcation speciﬁcations.
Page 15 Network Connection - Wired There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below: The Modem Port on the Wall TV Rear Panel Extternal Modem (ADSL / VDSL / Cable TV) Modem Cable (Not Supplied) LAN Cable (Not Supplied) The Modem Port on the Wall...
Page 16 How to view the e-Manual You can ﬁ nd instructions for your TV’s features in the e-Manual in your TV. To use, E-MANUAL press the E-MANUAL button on your remote. Move the cursor using the up/down/ right/left buttons to highlight a category, then a topic, and then press the ENTER( button.
Page 17 Viewing the Contents %DVLF )HDWXUHV ! &KDQJLQJ WKH 3UHVHW 3LFWXUH 0RGH ‰ Changing the Preset Picture Mode Contents Area: Contains the topic contents 2 MENUP Picture Picture Mode ENTER( if you selected a sub-menu. To move to the previous or next page, press the O or U button. Picture Mode Picture modes apply preset adjustments to the picture.
Page 18 If the TV seems to have a problem, ﬁrst review this list of possible problems and solutions. Also review the Troubleshooting section in the e-Manual. If none of the troubleshooting tips apply, visit “www.samsung.com,” and then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Page 19 4. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer. To purchase the TV-Holder Kit, contact Samsung Customer Care –...
Page 20 For information about the power supply, and more about power consumption, refer to the label attached to the product. Dispose unwanted electronics through an approved recycler. To ﬁnd the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799 (QJOLVK ...
Page 21 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2011 Samsung Electronics America, Inc (QJOLVK ...
Page 22 6DPVXQJ (OHFWURQLFV &DQDGD ,QF &XVWRPHU 6HUYLFH 6WDQGLVK &RXUW 0LVVLVVDXJD 2QWDULR /5 % &DQDGD 86$ 6$0681* ZZZVDPVXQJFRP 6DPVXQJ (OHFWURQLFV $PHULFD ,QF &KDOOHQJHU 5RDG 5LGJH¿ HOG 3DUN 1- © 2011 Samsung Electronics Co., Ltd. All rights reserved. %1$...
Page 33 E-MANUAL imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model _____________ Serial No. _____________...
Page 34: Table Of Contents
Contents Channel Menu Preference Features Advanced Features • Using the Channel Menu • Wired Network Connection • • Memorizing Channels • Wireless Network Connection • AllShare™ • Other Features • Setting the Time • Anynet+(HDMI-CEC) • Blocking Programs • Using the My Contents •...
Page 35: Channel Menu
Channel Menu ❑ Using the Channel Menu Press the CONTENT button to select Watch TV, and then select the desired menu item. Choose from Schedule Manager, Channel List, and Channel Manager. Watch TV Schedule Manager Channel List ▶ Channel Manager My Contents Source ●...
Page 36 ■ Schedule Manager CONTENT → → → Watch TV Schedule Manager ENTERE To cancel or set Timer Viewing. Timer Viewing lets you display the channel you want at the time of your choice. Using Timer Viewing You can set the TV to display a desired channel automatically on a day and at a ◀...
Page 37 To use Timer Viewing, follow these steps: 1. Press the button to add a scheduled viewing. ENTERE 2. Press the buttons to set Antenna, Channel, Repeat, Date, and Start Time. ● Antenna: Select the desired antenna source. ● Channel: Select the desired channel. ●...
Page 38 ● Date: you can set a desired date. Date is available only when you select Once in Repeat. ● Start Time: You can set the start time you want. You can only schedule memorized (added) channels. On the Information screen, you can change or cancel a scheduled viewing. ●...
Page 39: Channel List
■ Channel List Channel List contains the channels your TV displays (Added Channels) when you press the Channel button on your remote. On the Channel List, you can view Added Channels, channel information, Favorites, and manage channels. When you press the CH LIST button on the Channel List Added Channels remote control, the...
Page 40 If you want to view the list of favorite channels, press the CH LIST button, and then press the Mode) button to display 1-5. If you Favorites have favorites in more than one Favorite Group, press the Mode) to view the other groups. Press the button to return to the Channel List.
Page 41 ● Mode): Toggles between the list (if you have added Favorites favorites using Add to Favorites) and the Channel List. ● (Watch / Information): Press to watch the channel you selected / Displays details of the selected program. ● (Page): Scrolls the Channel List to the next or previous page.
Page 42 How to use Timer Viewing in Channel List (digital channels only) You can use Timer Viewing Channel List to schedule a digital channel program for viewing. The TV will turn on and display the digital channel program when the program begins.
Page 43 ■ Channel Manager CONTENT → → → Watch TV Channel Manager ENTERE Using Manager, you can add, edit, or delete Added and Favorite Channel channels. You can also add and edit channel Channel Manager 1/1 page Added Ch. Selected items : 4 Channel Number names - for analog channels only.
Page 44 Using the Arrow buttons with Channel Manager 1. Highlight a channel in the first column on the left, and then press the Left arrow button. The Channel Manager sub-menu appears. 2. Use the Up or Down arrow buttons to select Added Ch., All Channels...
Page 45 Channel Manager Option Menu Manage channels using the Channel Manager menu options (Watch, Add to Favorites Edit Favorites, Channel Name Edit, / Delete, Deselect All, Select All). The Option menu items that appear may differ depending on the channel status and type.
Page 46 Options ● Watch: Watch the channel you selected. To use, select Watch on the Option menu, and then press ENTERE. ● Add to Favorites Edit Favorites: Add to Favorites appears if the channel you selected is not already a favorite. Edit Favorites appears if the channel you selected is already a favorite.
Page 47 Using Edit Favorites to delete a channel from the Favorites List: 1. Select Favorites, and then press the button. The Edit ENTERE Edit screen appears. Favorites 2. The Favorites Group you assigned the channel to is checked. Select the group, and then press ENTERE.
Page 48 ● Channel Name Edit (analog channels only): Assign a name of up to five characters to a channel. For example, Hist, Food, Golf, etc. This makes it easier to find and select the channel. ● / Delete: Add a channel to or delete a channel from the Channel Manager.
Page 49 Adding a Channel to the Channel List: 1. Select a deleted channel on the list, and then press the All Channels ENTERE button. Deleted channels are grayed out. 2. Press the TOOLS button on your remote. The Options menu appears. 3.
Page 50 ● All: Deselect all the selected channels. Deselect You can only select when you have selected one or more Deselect All channels. ● All: Select all the channels in the channel list. To use, choose Select Select All in the Options menu, and then press ENTERE. All channels are selected and a check appears by each channel.
Page 51: Memorizing Channels
❑ Memorizing Channels → → MENUm Channel ENTERE ■ Antenna (Air / Cable) To select or Cable, follow these steps: Your TV memorizes channels and adds the memorized channels to the Channel Manager with the Auto Program function. Before your TV can memorize channels, you must specify the signal source, either or Cable.
Page 52 → → 1. Push on your remote. MENUm Channel ENTERE 2. Select Antenna, and then press ENTERE. 3. Select the source of your TV signal, or Cable, and then press the RETURN button. ◀ ▶ English...
Page 53 ■ Auto Program Scans for channels automatically and stores them in the TV’s memory. To start Auto Program, follow these steps: → → 1. Push MENUm Channel ENTERE on your remote. 2. Select Auto Program, and then press ENTERE. 3. Select Cable or both by highlighting and then pressing ENTERE.
Page 54 5. If you selected Cable, the Cable System screen appears. Select Digital, and then press ENTERE. If you selected only, starts. Auto Program 6. Select STD, HRC, or IRC, and then press ENTERE. 7. Repeat for Analog. 8. Select or Next, and then press ENTERE. starts.
Page 55 How to Stop Auto Programming 1. Press the button. ENTERE 2. A message will ask Select by pressing the Stop Auto Program? button. 3. Press the button. ENTERE ◀ ▶ English...
Page 56: Other Features
❑ Other Features → → MENUm Channel ENTERE ■ Clear Scrambled Channel This function is filters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. How to Stop the clear Scrambled Channels function ◀...
Page 57 ■ Fine Tune (analog channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
Page 58: Basic Features
Basic Features ❑ Changing the Preset Picture Mode → → → MENUm Picture Picture Mode ENTERE ■ Picture Mode Picture modes apply preset adjustments to the picture. Select a mode using the up and down arrow keys, and then press the ENTERE button.
Page 59: Adjusting Picture Settings
❑ Adjusting Picture Settings → → MENUm Picture ENTERE ■ Cell Light Contrast Brightness Sharpness Color Tint (G/R) Your television has several options for adjusting picture quality. Select an option using the up and down arrow keys, and then press ENTERE. Use the arrow keys to adjust the option value or select an option setting.
Page 60: Changing The Picture Size
❑ Changing the Picture Size → → → MENUm Picture Screen Adjustment ENTERE ■ Screen Adjustment Screen Adjustment provides various picture size and aspect ratio options. Select an option using the up and down arrow keys, and the press ENTERE. Use the arrow keys to select an option in the sub-menu, and then press ENTERE.
Page 61 Zoom1: Use for moderate magnification. Cuts off the top and sides. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture so it fits the entire screen. Available with HD 1080i / 720p signals in 16:9 mode. 4:3: Sets the picture to (4:3) mode.
Page 62 To use the Position function after selecting Zoom1, Fit, follow Zoom2 Wide these steps: 1. Press the button to select Position. 2. Press the button. ENTERE 3. Press the button to move the picture up or down. 4. Press the button.
Page 63 To use the function after selecting when connected to an Position Screen Fit HDMI (1080i/1080p) or Component (1080i/1080p) source, follow these steps: 1. Press the button to select Position. 2. Press the button. ENTERE 3. Press the u, d, button to move the picture. 4.
Page 64 ● HD (High Definition): 16:9 - 1080i / 1080p (1920x1080), 720p (1280x720) ● You can adjust and store settings for each external device you have connected to an input on the TV. ● Picture Sizes available by Input Source: Input Source Picture Size ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3...
Page 65: Changing The Picture Options
❑ Changing the Picture Options ■ Advanced Settings → → → MENUm Picture Advanced Settings ENTERE Advanced Settings are available in the Advanced Settings Standard Movie modes. When connecting Black Tone : Off ► a PC, you can only make changes to Gamma Dynamic Contrast : Medium...
Page 66 ● Black Tone (Off / Darkest): Select the black level to adjust the Dark Darker screen depth. ● Dynamic Contrast (Off / High): Adjusts the screen contrast. Medium ● Gamma: Adjusts the primary color intensity. ● RGB Only Mode (Off / Blue): Displays the Red, Green Green...
Page 67 ● Color Space (Auto / Native): Adjusts the range of colors (the color gamut) available to create images. ● Balance: Adjusts the color temperature for a more natural picture. White / B-Offset: Adjusts each color’s (red, green, blue) R-Offset G-Offset darkness.
Page 68: Picture Options
■ Picture Options → → → MENUm Picture Picture Options ENTERE Select an option using the up and down arrow keys, and then press ENTERE. Use the arrow keys to change the setting, and then press ENTERE. When connecting a PC, you can only make Picture Options changes to Color...
Page 69 ● Digital Noise Filter (Off Medium High Auto Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. When the signal is weak, try each option until the the TV displays the best picture.
Page 70 ● HDMI Black Level (Low / Normal): Lets you select the black level on the screen to adjust the screen depth. Available only in mode. HDMI ● Film Mode (Off Auto1 Auto2 Cinema Smooth ): Sets the TV so that it senses for PDP 550 Series and above and then processes film signals from all sources automatically and adjusts the picture for optimum quality.
Page 71 ■ Reset Picture (OK / Cancel) Resets your current picture mode to its default settings. ◀ ▶ English...
Page 72: Using The Tv With Your Pc
❑ Using the TV with Your PC Set the input source to PC. ■ Auto Adjustment → → → MENUm Picture Auto Adjustment ENTERE Automatically adjusts the picture’s frequency, position, and fine tune settings in the mode. Available in mode only. ◀...
Page 73 ■ PC Screen Adjustment → → → → MENUm Picture Screen Adjustment PC Screen Adjustment ENTERE Available in mode only. ● / Fine: Removes or reduces picture noise. If the noise is not removed Coarse by Fine-tuning alone, use the function to adjust the frequency as best Coarse as possible (Coarse) and Fine-tune again.
Page 74 Depending on your version of Windows and your video card, the procedure on your PC will probably differ slightly from the procedure presented here. However, the same basic information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.) ◀ ▶...
Page 75 1. On your PC, click “Control Panel” on the Windows start menu. 2. Click “Appearance and Themes” in the “Control Panel” window, A display dialog- box appears. 3. Click “Display”. Another display dialog box appears. 4. Click the “Settings” tab on the display dialog-box. ●...
Page 76: Changing The Preset Sound Modes
❑ Changing the Preset Sound Modes → → → MENUm Sound Sound Mode ENTERE ■ Sound Mode Use the up and down arrow keys to select an option, and then press ENTERE. ● Standard: Selects the normal sound mode. ● Music: Emphasizes music over voices.
Page 77: Adjusting Sound Settings
❑ Adjusting Sound Settings → → MENUm Sound ENTERE ■ Sound Effect Speaker Select is set to External Speaker, Sound Effect is disabled. ● SRS TruSurround HD (Off / On) (standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through ◀...
Page 78 ● Equalizer The Equalizer displays a series of sliders. Use the up and down arrow keys to select a slider. Use the left and right arrow keys to change the slider’s value. To Reset the Equalizer, select and press ENTERE, then press Reset ENTERE again.
Page 79 ■ Broadcast Audio Options ● Preferred Language (digital channels only) Use the up and down arrow keys to select a language, and then press ENTERE. Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous translations of the program into foreign languages). ◀...
Page 80 ● Multi-Track Sound (MTS) (analog channels only) Select an option using the up and down arrow keys, and the press ENTERE. Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. Stereo: Choose for channels that are broadcasting in stereo.
Page 81 ■ SPDIF Output The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater. ●...
Page 82 ■ Speaker Settings ● Speaker Select (External Speaker Speaker) If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver.
Page 83 ● Auto Volume (Off / Night) Normal equalizes the volume level on each channel, so that when you change Normal channels, the volume level is the same. Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you may want to keep the volume low.
Page 84 ■ Reset Sound (OK / Cancel) Reset all sound settings to the factory defaults. Select Reset, press ENTERE, select OK on the pop-up, and then press again. ENTERE ◀ ▶ English...
Page 85: Preference Features
Preference Features ❑ Wired Network Connection ■ Connecting to a Wired Network for PDP 550 Series and above There are three ways to attach your TV to your LAN using cable: ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable.
Page 86 ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer (router) which is connected to an external modem. Use LAN cable for the connection. See the diagram below. The Modem Port on the Wall External Modem...
Page 87 ● Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
Page 88 ● If you have a Dynamic Network, you should use an ADSL modem or router that supports the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually.
Page 89 ■ Network Settings → → → MENUm Network Network Settings ENTERE Set up your network connection so you can use various Internet services such as Contents, AllShare™ and perform software upgrades. ■ Network Status → → → MENUm Network Network Status ENTERE Lets you check the current network and Internet status.
Page 90: Network Settings
■ Automatic Network Setup Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1. Go to the Network Settings screen.
Page 91 If the connection process fails, check the Network Settings Wired network and Internet connection completed. LAN port connection. MAC Address 00:40:30:30:20:10 IP Address 192.168.10.21 Subnet Mask 255.255.255.0 If the automatic process cannot find the Gateway 192.168.10.1 DNS Server 203.248.252.2 Internet is connected successfully. network connection values or if you want to If you have a problem with using Internet service, contact your Internet service provider.
Page 92 ■ Manual Network Setup Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps: 1.
Page 93 How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Go to the screen. (MENUm Network Settings IP Settings → → → ENTERE) Network Network Settings Internet Protocol Setup : Manual ► IP Address 2.
Page 94 4. In the top entry field, press ENTERE, and then set to Manual. IP Mode 5. Press the button on your remote to go to the IP Address entry field, and then press ENTERE. 6. Enter the first portion of the IP Address (for example, 105) into the first entry field using the number keys on your remote.
Page 95 8. Repeat the entry process for each field in the IP Address. If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time.
Page 96: Wireless Network Connection
PDP 550 Series and above To connect your TV to your wireless network, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2, or WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.
Page 97 Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/c and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not be played smoothly.
Page 98 If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your wireless ◀ ▶ router, Samsung TVs will not support a connection in compliance with new Wi- Fi certification specifications. English...
Page 99 ● If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN adapter.” ● Ensure the TV is turned off before you connect the Samsung Wireless LAN adapter. ◀ ▶...
Page 100: Method
One Foot Connection – Plug & Access ◀ ▶ ● The TV may not recognize the Samsung Wireless LAN adapter if it is connected to the TV using a USB hub or USB extension cable other than the cable supplied. English...
Page 101 The picture may appear corrupted or have static on some channels when the TV is connected to the Samsung Wireless LAN adapter. If this occurs, connect the Samsung Wireless LAN adapter using a USB cable in a place that is not affected by radio interference.
Page 102: Method
■ Automatic Network Setup Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network.
Page 103 3. The function searches for available wireless networks. When done, it Network displays a list of the available networks. 4. In the list of networks, press the button to select a network, and then press the ENTERE button twice. If the wireless router is set to Hidden (Invisible), you have to select Network and enter the correct Network Name (SSID)
Page 104 6. If the wireless router has security, enter the Network Settings Enter security key. 0 entered Security key (Security key or PIN). When you enter the Security key (Security key or PIN), use buttons on your remote to select Delete Space Done number/characters.
Page 105 7. When done, use the right arrow button to move the cursor to Done, and then press ENTERE. 8. The network test screen appears and the verification process starts. When the connection has been verified, the “Internet connection successful.” message appears.
Page 106 ■ Manual Network Setup Use Manual Network Setup when connecting your TV to a network that requires a Static IP address or if the automatic connection process has failed. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps: 1.
Page 107 How to set up manually To set up your TV’s cable network connection manually, follow these steps: → → 1. Go to the screen. (MENUm Network Settings Network Network → ENTERE) Settings 2. Select (General), and then press the button. Wireless ENTERE 3.
Page 108 5. If the Enter Security key screen appears, go to step 6. If you selected an AP or wireless router that does not have security, go to step 8. 6. Enter the Security key (Security key or PIN). When you enter the Security key (Security key or PIN), use the l /r...
Page 109 7. When done, use the button to move the cursor to Done, and then press the ENTERE button. 8. The network test screen appears and the verification process starts. Press to cancel. Select on network test screen. The ENTERE IP Settings screen appears.
Page 110 13. Repeat the entry process for each field in the Address. If you make a mistake when entering a number, re-enter the number to correct it. You can also press the button to change the number one unit at a time. 14.
Page 111 ■ WPS(PBC) Network Setup How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps: → 1. Go to Network Settings screen. (MENUm Network Settings Select a network connection type. → → ENTERE). Network Network Settings 2.
Page 112 You can connect to a mobile device that supports Ad-hoc connections - without going through a wireless router - using the “Samsung Wireless LAN adapter”. After you connect the TV to a mobile device, you can use files on the device or connect to the internet using the AllShare or My Contents function.
Page 113 4. Select OK, and press ENTERE. The TV searches for the mobile device. 5. When the TV finishes searching for mobile devices, input the generated into the device you want to connect. Network Name (SSID) Security Key If network does not operate normally, check the Network Name (SSID) Security Key again.
Page 114 ■ One Foot Connection Network Setup One Foot Connection function lets you connect your Samsung TV automatically to a Samsung wireless Router. If your wireless router does not support Connection, you must connect using one of the other One Foot methods.
Page 115 10 inches (25cm) of your TV. U Move E Enter R Return ◀ 4. Place the router in parallel with and no more than ▶ ● The displayed image may differ depending on the model. 9 3/4 inches from the Samsung Wireless LAN Adapter. English...
Page 116 If you want to try using One Foot Connection again, reset the wireless router, disconnect the Samsung Wireless LAN adapter and then try again from Step1. 5. The network test screen appears, and network set up is done.
Page 117 Plug & Access function lets you easily connect your Samsung TV to your Samsung wireless router by using a USB memory stick to transfer the setup information from the router to the TV. If your non-Samsung wireless router does not support Plug &...
Page 118 How to set up using Plug & Access function 1. Turn on the Samsung wireless router and your TV. 2. Insert a USB memory stick into the USB port in your Samsung wireless router. Check the router’s LED’s to make sure it is on (Blinking → On).
Page 119 5. The network test screen appears, and the network setup is done. 6. Place the wireless router in a desired location. If the router’s settings change or you install a new wireless router, you must perform the procedure again, beginning from Step 1. Plug &...
Page 120 This Priority QOS function is unique to Samsung wireless routers. You can connect a Samsung wireless router to many devices, such as laptops, mobile phones, BD players etc. But, when you connect a Samsung TV to a Samsung wireless router, the Samsung wireless router gives the Samsung TV a priority connection.
Page 121 The internet connection may fail because of a firewall problem. If this is the case, contact your Internet service provider. If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG. English...
Page 122: Setting The Time
❑ Setting the Time → System →Time → MENUm ENTERE ■ Time The current time will appear every time you press the INFO button. ● Clock: Setting the clock to use the various various timer features of the TV. If you disconnect the power cord, you have to set the clock again. –...
Page 123 Manual: Set the current time manually. Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. – Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm. Select Clock Set.
Page 124 – DST (Off / On): Switches the DST (Daylight Saving Time) function on or off. This function is only available when the is set to Auto. Clock Mode – Zone: Select your time zone. Time This function is only available when the is set to Auto.
Page 125 Setting the On / Off Timer → → → MENUm System Time ENTERE ● so that your TV turns on On Timer On Timer 1 automatically at a time and on a day of your Setup Once choosing. On Time Volume ●...
Page 126 Time: Set the hour, minute, am/pm. Use the number buttons or the up and down arrow keys to enter numbers. Use the left and right arrow buttons to change entry fields. Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
Page 127 NOTE ● If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not operate correctly. ● If there is only one photo file in the USB, the Slide Show will not play. ●...
Page 128 ● Timer: You can set up three separate Off Off Timer 1 Timer configurations. (Off Timer Off Timer Setup Off Timer Once You must set the clock before you can Off Time Timer. Setup: Select Off, Once, Everyday, or Manual. If Mon~Fri, Mon~Sat, Sat~Sun L Move...
Page 129: Blocking Programs
❑ Blocking Programs → → → MENUm System Security ENTERE ■ Security When you access the Security functions for the first time, the PIN input screen appears. Enter a 4 digit PIN you will remember. The PIN screen closes and the Securty Menu appears.
Page 130 Rating: You can block TV programs based on their ratings. This function allows you to control what your children can watch. TV Rating displays a grid with locks. The following categories are on the left side: – TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / MA: Mature audience The following categories are on top:...
Page 131 Similarly, if you click under ALL, then all the categories in the young TV-G adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub- ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG, then the sub-ratings in TV-14...
Page 132 (MPAA): You can block movies based on their MPAA rating. Movie Rating The Motion Picture Association of America (MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children. Movie Rating displays a column with locks and the following ratings categories: –...
Page 133 To block certain content, you select a lock, and press (That ENTERE is, you “click it”.). For example, click the lock and you block all X-rated movies. The rating categories are also grouped so that clicking one category blocks all the categories a parent would block along with it. For example, if you block the category, then R, will...
Page 134 Rating: You can block TV programs based on their Canadian English Anglophone Canadian rating. Canadian English Rating displays a column with locks and the following ratings categories: – C: Programming intended for children under age 8. / C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.
Page 135 To block certain content, you select a lock, and press (That ENTERE is, you “click it”.). For example, click the 18+ lock and you block all TV programs rated 18+. The rating categories are also grouped so that clicking one category blocks all the categories a parent would block along with it.
Page 136 Rating: You can block TV programs based on their French Canadian French Canadian rating. Canadian French Rating displays a column with locks and the following ratings categories: – G: General / ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. / ans+: Programming may not be suitable for children under the age of 13.
Page 137 To block certain content, you select a lock, and press (That ENTERE is, you “click it”.). For example, click the 18 ans+ lock and you block all TV programs rated 18 ans+. The rating categories are also grouped so that clicking one category blocks all the categories a parent would block along with it.
Page 138 NOTE ● If information is not downloaded from the broadcasting station, Downloadable U.S. Rating menu is deactivated. ● Parental restriction information is automatically downloaded while you watch DTV channels. It may take several seconds. ● Downloadable U.S. Rating menu is available for use after information is downloaded from the broadcasting station.
Page 139 ● Even if you set the on-screen display to another language, the Downloadable U.S. Rating menu will appear in English only. ● Blocking one rating level will automatically block other categories that deal with more sensitive material. ● The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station.
Page 140 ● PIN: The screen will appear. Choose any 4 digits for your Change Change PIN PIN and enter it in PIN. Re-enter the same 4 digits. in Enter New Confirm New PIN. When the Confirm screen disappears, press the OK button. The TV has memorized your new PIN.
Page 141: Economical Solutions
❑ Economical Solutions ■ Eco Solution → → → MENUm System Eco Solution ENTERE ● Energy Saving (Off Medium High Picture Off): Lets you adjusts the brightness of the TV in order to reduce power consumption. If you select Off, the screen is turned off, but the sound remains on. Press any Picture button except the volume button to turn on the screen.
Page 142 Light: When is On, you can manually adjust the minimum Min Cell Eco sensor screen brightness. Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. You can control the screen’s minimum brightness with the Min Backlight function. ●...
Page 143: Picture In Picture (Pip)
❑ Picture In Picture (PIP) → → → MENUm System ENTERE ■ You can watch a program whose signal has passed through the TV’s tuner and the video from one external video source simultaneously. For example, if you have a cable box connected to the Cable In jack, you can use to watch programs from the cable box and a movie from a Blu-ray player attached to the HDMI In jack.
Page 144 NOTE ● For PIP sound, refer to the instructions. Sound Select ● function is not available in mode. ● If you turn the TV off while watching in the PIP mode, the PIP function is reset to off. When you turn your TV on, you must turn PIP on again to watch in the PIP mode.
Page 145 ● PIP (Off / On): Activate or deactivate the PIP function. ● Air/Cable (Air / Cable): Select either as the input source for the Cable sub-screen. ● Channel: Select the channel for the sub-screen. ● (ã / õ): Select a size for the subpicture. Size ●...
Page 146: Other Features
❑ Other Features → → MENUm System ENTERE ■ Menu Language Set the menu language. 1. Select Menu Language, and then press the ENTERE button. 2. Choose a language, and then press the ENTERE button. Choose from English, Español, and Français. ◀...
Page 147 ■ Caption (On-Screen Text Messages) ● Caption (Off / On): You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. The Caption feature does not work with devices connected to the TV through the Component, HDMI or PC input jacks.
Page 148 / Text1~Text4: (digital channels Default Service1~Service6 CC1~CC4 only) The Digital Captions function works with digital channels. Service1~6 may not be available in digital caption mode depending on the broadcast. ● Options: (digital channels only) Adjusts the each option. When Digital Caption done, select Close.
Page 149 Color: You can change the background color of the caption. Background Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. The default is Black. Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing. Opacity: This adjusts the opacity of the caption background.
Page 150 NOTE ● are available only when you can select Digital Caption Options Default Service1 Service6 Caption Mode. ● The availability of captions depends on the program being broadcast. ● setting follows the standards set by the broadcaster. Default ● You cannot set the Foreground and Background to the same color. ●...
Page 151 ■ Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Time function setting allows you to program the time between movement of the picture in minutes.
Page 152 ● Pixel Shift (Off / On): Using this function, you can set the TV to move pixels minutely on the PDP screen in a horizontal or vertical direction to minimize after images on the screen. Available Pixel Shift Settings and Optimum Settings Optimum Settings for TV/AV/ Available Settings Component/HDMI/PC...
Page 153 ● Auto Protection Time (Off hour): If the screen 10 min. 20 min. 40 min. displays a still image for a certain period of time you define, the TV activates the screen saver to prevent the formation of burnt in ghost images on the screen. ●...
Page 154 ■ General ● Game Mode (Off / On): When you have connected a game console such as a PlayStation™ or Xbox™ to the TV, you can enjoy a more realistic gaming experience if you set Game Mode on. Precautions and limitations for Game Mode –...
Page 155 is not available when the input source is set to TV or PC. Game Mode only after connecting a game console. If you turn Game Mode Game Mode on before you have attached the game console, you may notice reduced picture quality. Game Mode is On: –...
Page 156 Menu Transparency (Bright / Dark): Set the Transparency of the menu. ● Boot Logo (Off / On): Displays the Samsung logo when the TV is turned on. ● : Sets the TV name so you can find it easily TV Name for PDP 550 Series and above on a mobile device.
Page 157 ■ Anynet+ (HDMI-CEC) For details on set up options, refer to the “Anynet+ (HDMI-CEC)” instructions. ◀ ▶ English...
Page 158 ■ DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register using that code, you can download the VOD registration file. If you activate the VOD registration using My Contents, the registration is completed. For more information about DivX®...
Page 159 Network Remote Control (On / Off) for PDP 550 Series and above Turn on/off or give permission to Samsung mobile phone devices to connect with and control the TV. You must have a Samsung Mobile phone/device which supports Network Remote Control.
Page 160: Support Menu
❑ Support Menu → → MENUm Support ENTERE ■ e-Manual The e-Manual is built into your TV. Open the e-Manual to learn how to use your TV’s many features. For the detailed information about the e-Manual Screen, refer to “How to view the e-Manual”...
Page 161 Yes: Select Yes if the test picture does not appear or there is noise or distortion in the test picture. There may be a problem with the TV. Contact Samsung’s Call Center for assistance.
Page 162 ◀ ▶ speaker during the sound test. There may be a problem with the TV. Contact Samsung’s Call Center for assistance. No: Select if you can hear sound from the speakers. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Page 163 ● Information: (digital channels only) The reception quality of over-the-air Signal HD channels is either perfect or the channels are unavailable. Signal Information displays HD channel signal strength so you can adjust your antenna to increase signal strength and receive HD channels. ●...
Page 164: Software Upgrade
■ Software Upgrade Software Upgrade menu lets you upgrade Software Upgrade your TV’s software to the latest version. Current Version 2011/01/18_000001 Version: This is the software version Current By USB already installed in the TV. Alternative Software ----/--/--_----- The current version is displayed in the following format: Year Month...
Page 165 Upgrading to the Latest Version You can upgrade in three ways: ● By USB ● By Online ● By Standby Mode Upgrade The three methods are explained in the following pages. Be careful not to turn off the power until the upgrade is complete. The TV will ◀...
Page 166 By USB To upgrade by USB, follow these steps: 1. Visit www.samsung.com. 2. Download the latest USB software upgrade exe archive to your computer. 3. Extracts the exe archive to your computer. ● The displayed image may differ depending on the model.
Page 167 By Online for PDP 550 Series and above function lets you download the upgrade software directly from By Online the Internet into your TV and then upgrade the software in one operation. To Online, you must have configured your TV to connect to your network and the TV must be connected to the Internet.
Page 168 3. When the download is complete, the Upgrade Query window appears with three choices: Upgrade Now, Upgrade Later, or Don’t Upgrade. 4. If you select Upgrade Now, the TV upgrades the software, turns off, and then turns on automatically. 5. If you do not make a selection in one minute or select Upgrade Later, the TV stores the new upgrade software.
Page 169 Alternative Software for PDP 550 Series and above option lets you upgrade using a file the TV Alternative Software downloaded earlier, but you decided not to install immediately, or a file downloaded by the TV in Standby Mode (See on the Standby Mode Upgrade next page).
Page 170 Standby Mode Upgrade for PDP 550 Series and above You can set the function so that the TV downloads Standby Mode Upgrade new upgrade software when it is in Standby mode. In Standby mode, the TV is off, but its Internet connection is active. This allows the TV to download upgrade software automatically, when you are not using it.
Page 171 2. Select or Off. ● : If you select Off, the TV will notify you with a pop up message when new upgrade software is available. ● : If you select On, the TV will automatically download new upgrade software when it is in Standby mode with the power off. If it downloads new upgrade software, the TV will ask you if you want to install it when you turn the TV on.
Page 172 ■ Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software. ◀ ▶ English...
Page 173: 139
■ Using the 3D function This exciting new feature enables you to view 3D content. To fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG-3100GB, SSG-3300GR, SSG-3300CR, SSG-3700CR) to view 3D video. Samsung 3D Active Glasses are sold separately.
Page 174 IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. WARNING ● Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses and rest.
Page 175 ● A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. ● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) ●...
Page 176 ● Mode: Select the 3D input format. If you want to experience the 3D effect fully, put the 3D Active Glasses on first, and then select the from the list below that provides the best 3D Mode 3D viewing experience. 3D Mode Operation Turns the 3D function off.
Page 177 ● +5): Adjust the overall 3D perspective of on-screen 3D Perspective (-5 ~ image. ● (1~10): Adjust overall depth. Depth ● L/R Change (L/R Image Image): Swaps the left and right pictures. ● → 2D (Off / On): Displays the image for the left eye only. This function is deactivated when set to “2D →...
Page 178 Support resolution (16:9 only) Resolution Frequency (Hz) 1280 x 720p 50 / 60 Hz 1920 x 1080i 50 / 60 Hz. 1920 x 1080p 24 / 30 / 50 / 60 Hz Resolution supported for HDMI PC mode ◀ ▶ The optimal resolution for the HDMI PC mode is 1920 x 1080.
Page 179 How to watch the 3D images Some 3D modes may not be available depending on the format of the image source. To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button. 1.
Page 180 3. Use the button to select Mode, and 3D Mode then press the button. ENTERE 4. Using the buttons on your remote control, select the 3D Mode of the image you want to view. U Off L Move E Enter R Return ●...
Page 181 Supported formats and operating specifications for Standard HDMI 3D The 3D formats listed below are recommended by the HDMI association and must be supported by 3D TVs. Source signal format Standard HDMI 1.4 3D 1920x1080p@24Hz x 2 1920x2205p@24Hz 1280x720p@60Hz x 2 1280x1470p@60Hz ◀...
Page 182 Read These Notes Before Using the 3D Function... NOTE ● 3D Mode is set to automatically when you access My Contents e-Manual functions. ● is set to its memorized configuration value automatically when 3D Mode you change the input source. ●...
Page 183 ● 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers are not supported. ● When the TV is initially powered on, it may take some time until the 3D display is optimized. ● The 3D Active Glasses may not work properly if there are any other 3D product or electronic devices turned on near the glasses or TV.
Page 184 ● Be sure to stay within the optimum viewing angle and TV viewing distance when watching 3D pictures. Otherwise, you may not be able to see 3D effects properly. ● The ideal 3D viewing distance is three times or more the height of the screen.
Page 185: Allshare
(such as your PC) by controlling them on the TV via the network. For more information, visit “www.samsung.com” or contact the Samsung call center. Mobile devices may need additional software installation. For details, ◀...
Page 186 If your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may occur during video playback. By connecting your Samsung TV to a network via AllShare™, you can use Samsung’s original functions as follows: – Playback of various video formats (DivX,XVID, MP4, 3GPP, AVI, ASF, MKV, etc.)
Page 187 ❑ Setting Up AllShare™ for PDP 550 Series and above → → → MENUm Network AllShare Settings ENTERE ■ AllShare Settings ● Media (On / Off): Enables or disables the AllShare Settings media function. When the media function Media ► is on, you can control Media contents play using mobile phones or other devices that support DLNA DMC.
Page 188 ■ Media Shows a list of mobile phones or connected devices which have been set up to use the function with this TV. Media The Media function is available in all devices which support DLNA DMC. ● Denied: Allows/Blocks the devices. Allowed / ●...
Page 189 Using the Media Function An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played.
Page 190 ● To turn off media contents transmissions from a mobile phone, set Media in the AllShare Settings. ● Contents may not play on your TV depending on their resolution and format. ● buttons may not work depending on the type of ENTERE media content.
Page 191: Anynet+(Hdmi-Cec)
■ What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
Page 192 ● For instructions explaining how to connect Anynet+ external devices, refer to the device’s user manual. ● You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not support Anynet+ functions. ● Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
Page 193 – To hear sound from the Home Theater’s Front, Left and Right speakers and the subwoofe only, connect a Digital Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theater. –...
Page 194 Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Changes Anynet+ mode to TV broadcast mode. Device List Shows the Anynet+ device list. (device_name) MENU Shows the connected device menus.
Page 195: Setting Up Anynet
❑ Setting Up Anynet+ → → → MENUm System Anynet+ (HDMI-CEC) ENTERE ■ Anynet+ (HDMI-CEC) (Off / On) To use the Anynet+ Function, you must set Anynet+ (HDMI-CEC) to On. When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Page 196 ❑ Switching between Anynet+ Devices 1. Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press ENTER. 2. Select Device List, and then press the ENTERE button. If you cannot find a device you want, press the button to refresh the list. 3.
Page 197: Listening Through A Receiver
❑ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theater) instead of the Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the optical in jack ◀...
Page 198: Troubleshooting For Anynet
❑ Troubleshooting for Anynet+ Problem Possible Solution • Check if the device is an Anynet+ device. The Anynet+ system Anynet+ does not work. supports Anynet+ devices only. • You can connect only one receiver (home theater). • Check if the Anynet+ device power cord is properly connected. •...
Page 199 • Check if the Anynet+ device is properly connected to the TV and I want to start Anynet+. check if the Anynet+ (HDMI-CEC) is set to in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want.
Page 200 • Check whether or not the device supports Anynet+ functions. The connected device is not displayed. • Check whether or not the HDMI cable is properly connected. • Check whether is set to in the Anynet+ Anynet+ (HDMI-CEC) setup menu. •...
Page 201: Using The My Contents
❑ Using the My Contents Enjoy photos, music and/or movie files saved on My Contents a USB Mass Storage Class (MSC) device and/or Videos Photos your PC. Music 1. Press the CONTENT button. Source Watch TV 2. Press the button to select the Videos, Photos, or Music, and then press ●...
Page 202: Connecting A Usb Device
❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and/or movie files to the USB jack on the side of the TV. 3. When a USB device is connected to the TV, Connected Device window appears.
Page 203 The USB function might not work properly with unlicensed multimedia files. Read this information before using with a USB device: My Contents ● MTP (Media Transfer Protocol) is not supported. ● The file system supports FAT16, FAT32 and NTFS. ● Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Page 204 Connect USB HDDs to the dedicated port, USB 1 (HDD), only. ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ●...
Page 205 ● If a file is corrupted or the TV does not support the file type, the “Not Supported File Format” message appears. ● If the files are sorted by Folder View, the TV can display the names of up to 1000 files in each folder.
Page 206 ● If more than 2 PTP devices are connected, you can only use one at a time. ● If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.
Page 207 ● If you use a USB extension cable, the TV may not recognize the USB device or may not be able to read the files on the device. ● If a USB device you connect to the TV is not recognized, the files on the device are corrupted, or a file in the list is not played, connect the USB device to a PC, format the device and check the connection.
Page 208 ❑ Connecting to a PC through your network for PDP 550 Series and above You can play pictures, music, and videos saved in your PC through a network connection using the AllShare mode. For more information on how to configure your TV and connect it to your network, see ‘Network Connection’.
Page 209 The following My Contents functions are not supported when you are playing media from a PC connected through a network: ● functions. Background Music Background Music Setting ● Sorting files by preference in the Photos, Music, and folders. Videos ● (REW) or (FF) button while a movie is playing.
Page 210 ❑ My Contents Selection Screen To play a file, move to the file using the buttons, and then press the ENTERE (Play) button. The TV plays the file. The My Contents screen ∂ may differ depending on the way you enter the screen. Music 1/100 pages Information: Displays the...
Page 211: Videos
■ Videos Playing a Video 1. Press the button to select the desired video in the file list. 2. Press the ENTERE button or (Play) ∂ button. – The file name appears on the top with its L Jump T Tools R Return ◀...
Page 212 – During video playback, you can search using the buttons. – You can use the (REW), (FF), Pause, Stop, and Play buttons on the � µ bottom of your remote during playback. – Press the RETURN button to exit the movie ●...
Page 213 ● Supported Video Formats Frame rate Bit rate File Extension Container Video Codec Resolution Audio Codec (fps) (Mbps) Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 MP3 / AC3 XviD 1920x1080 6 ~ 30 *.avi / LPCM / H.264 BP / MP / HP 1920x1080 6 ~ 30...
Page 214 Frame rate Bit rate File Extension Container Video Codec Resolution Audio Codec (fps) (Mbps) H.264 BP / MP / HP 1920x1080 6 ~ 30 ADPCM / *.3gp 3GPP AAC / HE- MPEG4 SP / ASP 1920x1080 6 ~ 30 MPEG1 1920x1080 24 / 25 / 30 AC3 / MPEG...
Page 215 Other Restrictions NOTE ● Video content will not play, or not play correctly, if there is an error in the content or the container. ● Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. ●...
Page 216 Video Decoder Audio Decoder • • Supports up to H.264, Level 4.1 Supports up to WMA 7, 8, 9, STD • • H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 WMA 9 PRO does not support 2 channel excess and AVCHD are not supported.
Page 217 Playing movie continuously (Resume Play) If you exit a movie when it is playing, you can play the movie later from the point where you stopped it. 1. Select the movie file you stopped and want to resume by pressing the button to select it from the file list section.
Page 218: Music
■ Music Playing Music 1. Press the button to select the Music desired music file in the file list. 2. Press the ENTERE button or (Play) ∂ button. – When the music is playing you can E Pause L Pages T Tools R Return ◀...
Page 219 Playing selected music 1. Press the (Edit Mode) button. A check box appears on the left side of all the music files. 2. Using the arrow keys, highlight a file you want to play, and then press ENTERE. appears in the check box of the selected file. 3.
Page 220: Photos
■ Photos Viewing a Photo (or Slide Show) 1. Press the button to select Play the desired photo in the file list. 2. Press the ENTERE button. ● To view files manually, one at a time, press the left or right arrow buttons. E Pause L Previous/Next T Tools...
Page 221 When you press the (Play) button in the file list, the slide show will start ∂ immediately. During a Slide show, press the TOOLS button to access additional functions such as Slide Show Speed, Background Music, Zoom, and Rotate. You can add background music to a slide show if you have music files on your USB device or PC by setting Background Music in the...
Page 222: Additional Functions
❑ My Contents - Additional Functions Sorting the file list Press the button in the file list to sort the files. Category Operation Videos Music Photos Displays the whole folder. You can Folder View view the photo by selecting the folder.
Page 223 Category Operation Videos Music Photos Sorts the music file by artist in Artist alphabetical order. Sorts the music file by album in Album alphabetical order. Sorts music files by the genre. Genre Sorts and shows photo files by Monthly month. ◀...
Page 224 Videos/Music/Photos Play Option menu When playing a file, press the TOOLS button. The Option Menu appears. Checks in the table below indicate which media the options apply to. Option Name Operation Videos Music Photos You immediately load a video file Title Search you select.
Page 225 Option Name Operation Videos Music Photos You can adjust the picture size to Picture Size your preference. Picture Mode You can select the Picture Mode. Sound Mode You can select the Sound Mode. ◀ ▶ English...
Page 226 Option Name Operation Videos Music Photos You can view a subtitle. You can select a specific language if the Subtitle Language subtitle file contains multiple languages. You can play a video with Subtitles. This function only works Subtitle Setting if the subtitles file has the same file name as the video.
Page 227 Option Name Operation Videos Music Photos You can enjoy a video in one of the supported languages. The function Audio is only enabled when you play stream-type files which support multiple audio formats. Start Slide Show / You can start or pause a Slide Show.
Page 228 Option Name Operation Videos Music Photos You can zoom into images in full screen mode. Use the ENTER Zoom button to increase or decrease the zoom. Use the arrow buttons to select the area to enlarge. You can rotate images in full screen mode.
Page 229: Other Information
Other Information ❑ TroubleShooting If the TV seems to have a problem, first review this list of problems and solutions. If none of these troubleshooting tips apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG. Issues...
Page 230 Issues Solutions and Explanations • The compression of video contents may cause picture distortion The picture is distorted: macro block error, small block, dots, especially in fast moving pictures such as sports and action movies. pixelization • A weak signal can cause picture distortion. This is not a TV issue. •...
Page 231 Issues Solutions and Explanations • Make sure the glasses are turned on. The 3D Active Glasses are not working correctly. • The 3D Active Glasses may not work properly if there is any other 3D product or electronic device turned on near the glasses or TV. •...
Page 232 Issues Solutions and Explanations • If connected to a cable box, try to reset the box. (Disconnect and then When changing channels, the picture freezes or is distorted or reconnect the AC cord and wait until the cable box reboots. It may take delayed.
Page 233 Issues Solutions and Explanations • Set the option to in the menu. Speaker Select TV Speaker Sound The picture is good but there is no sound. • If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
Page 234 Issues Solutions and Explanations • Check the cable connections. Make sure a video cable is not connected The speakers are making an inappropriate noise. to an audio input. • For antenna or Cable connections, check the signal strength. Low signal level may cause sound distortion.
Page 235 Issues Solutions and Explanations RF (Cable/Antenna) Connection • Make sure the coaxial cable is connected securely. The TV is not receiving all channels. • Please try Auto Program to add available channels to the channel list. Go to MENU - Channel Auto Program then select Auto and make sure...
Page 236 PC. Network Connection for PDP 550 Series and above ◀ ▶ • The Samsung Wireless USB dongle is required to use a wireless network. The wireless network • Make sure the Network Connection is set to Wireless(General). connection failed.
Page 237 Issues Solutions and Explanations • Run Network Test in the Network menu to confirm the connection. Software Upgrade over the • If you have the latest Software (SW) version already installed, SW network fails. upgrade will not proceed. Others • Remove the left and right audio connections from the set-top-box.
Page 238 Issues Solutions and Explanations • HD channels will have black bars on either side of the screen when The picture won’t display in full screen. displaying up scaled SD (4:3) contents. • Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
Page 239 Issues Solutions and Explanations • You cannot select the Caption menu if you have selected a source on TV menu is greyed Caption out. connected to the TV via HDMI or Component. • The external device’s Capton function must also be activated. •...
Page 240 Issues Solutions and Explanations • If the TV is in the Store Demo mode, it will reset audio and picture Your settings are lost after 30 minutes or every time the TV is settings every 30 minutes. Change the settings from Store Demo mode turned off.
Page 241: Anti-Theft Kensington Lock
Refer to the manual provided with the Kensington Lock for additional information on proper use. The Kensington Lock is not supplied by Samsung. Please find a “K” icon on the rear of the TV. The Kensington slot is beside the “K”...
Page 242 To lock the product, follow these steps: 1. Wrap the Kensington Lock cable around a large, stationary object such as desk or chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington Lock cable.
Page 243: License
❑ License TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; ◀...
Page 244 DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video.

This manual is also suitable for:

550

Samsung series 5+ 550 User Manual

Quick Links

user manual

Troubleshooting

Related Manuals for Samsung series 5+ 550

Summary of Contents for Samsung series 5+ 550

This manual is also suitable for:

Table of Contents