Download Print this page

Installing The Hardware - D-Link AirPremier N DAP-2590 Quick Install Manual

Dual band poe access point

Hide thumbs Also See for AirPremier N DAP-2590:

Table of Contents

Available languages

To power the access point, you can use one of the

following methods:

1. Use the supplied power adapter

2. Connect one end of your Ethernet cable into the

LAN (PoE) port on the DAP-2590 and the other end

into one port on a PoE switch.

To setup and manage the DAP-2590 from a computer,

use one of the following methods:

1. Connect a straight through Ethernet cable between

the access point and your computer.

2. Connect the access point to a switch or router

and use a computer from a computer that is also

connected to that switch or router.

3. Please start your web browser program, type the

IP address of the device (http://192.168.0.50) and

press Enter. Make sure that the IP addresses of the

device and your computer are in the same subnet.

Then, refer to the Manual for configuration.

Installing the Hardware

Power Receptor

Antennas

Reset

LAN Port (PoE)

DAP-2590 Install Guide

Table of Contents

Show Quick Links

Table of Contents